similar to: Connect Two Asterisk's using isdn Cards

Hello, I am now working on a project which need data modem calls passing trough asterisk with a TDM card. But i found out (as Mr Greg woods) that it was impossible. So know i am trying doing this using an E1/T1 card (TE110P). I am still working on it so we can help each other to find a solution to this.

Hello everyone, My setup: Debian squeeze Asterisk 1.8, DAHDI, libpri, compiled from source TE110P, attached to a Deutsche Telekom Octopus E Modell 300/800 I'm trying to get MWI for Voicemail working. In the same server I have also got an Eicon DIVA PRI card for testing purposes (it is integrated via CAPI and the chan-capi channel driver into my Asterisk). MWI works just fine there. I

Dear All, I'm having problem with spandsp/txfax, I'm not able to send a multi paged tiff file, the fax machine receives the first page of the document and complains about communication problem. The file what I'm trying to send has 2 pages and is received & generated by spandsp/rxfax. Searched in the archives, but found no solution. I'm using: Dell Optiplex PC Inoteska Quad

Hello, All. I have a problem with receiving fax through T.30. I'm calling 543 number from fax machine, then start sending fax and fax machine send document without problem. But asterisk don't receive fax. I can't find good documentation for app_fax and I'am googled this errors. Please help me. software: asterisk-1.6.2 OS: ALT Linux 5.0.1 Ark Server hardware: Digium Wildcard

Hi. I'm looking at ordering a 30-channel ISDN connection from telia (a swedish operator) and then using a Wildcard TE110P card with that and asterisk to do IVR. Can I be certain that the TE110P card will work with that ISDN connection? A 30 channel ISDN certainly sounds like an E1 connection, but I couldn't get any clear answers from the operator if it is. Has anyone used the TE110P

Hello everybody I am trying to connect my asterisk to a payment equipment trough PSTN. I have a TDM400P card with an fxs module an the equipment use modem to send data! I was thinking to implement a software data modem in asterisk, but I found out that there is just faxmodem for asterisk, Is anyone here know something about software data modem working with asterisk to help out? Thanks,

I am trying to use TE110p card for Euro ISDN with Ericsson AMS switch. I consistently get one of the following errors: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 or PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1 My zaptel.conf file: -------------------------------- span=1,0,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 loadzone=us defaultzone=us

Hi, I have been trying to get a Wildcard TE122 card running here the last couple of days. libpri and zaptel are all installed and configured to E1 specs. The jumper on the card is on, so configured for E1 (I'm in Norway). When running zttool, I get 'Alarms: RED' on the single card installed. Other information in zttool: Current alarms: Red Alarm Sync source: Internally clocked

Does anyone know if the TE122 is recognized by any of the 1.2 zaptel drivers? It seems that 1.2.16 knows it not... :) Cheers, j

lspci | grep Digium 03:05.0 Ethernet controller: Digium, Inc. Wildcard TE122 single-span T1/E1/J1 card (rev 11) dahdi_scan So I have a card in a box - lspci shows it... dahdi_scan reports nothing. Is my card dead? Jerry -------------- next part -------------- An HTML attachment was scrubbed... URL:

I have recently built a single-T1 Asterisk box using an HP DL120G6 with a Digium TE122 card. I was finding that I was getting missed interrupts on the TE122, causing the driver to report that it was increasing latency. It kept doing this until the T1 did not work reliably. I tried my usual procedure of disabling the USB subsystem in the BIOS (or so I thought), but I found that the USB drivers

What's the difference between the TE121 and TE122. I read the description on Digium's site and it isn't clear to me. Best regards, -- Guilherme Loch G?es Visite nossa loja virtual: http://www.shopvoip.com.br Not?cias e F?rum sobre VoIP com software livre: http://www.asteriskexperts.com.br -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I am building for a customer an * solution that will use 2 Digium cards. 1 x TE110P (T1 ISDN PRI) 1 x TDM40B (4 analog ports, 2 for faxes, 2 for extensions) The system will be connected to the PSTN through the T1 ISDN PRI interface. All customer extensions will be SIP phones except 2 fax machines that will use the analog FXS ports on the TDM40B card. I have been investigating on this

hi PSTN <--> [Teles ISDN / Asterisk] <--> SIP client When call is made through ISDN, no matter if taken from PSTN or Asterisk side, person in PSTN side can hear perfectly but in Asterisk side I only hear a very scrambled or very low quality voice, words repeated several times. Same is with echo test (call taken from PSTN) Setup: * Teles 16.3 ISA ISDN card with hisax kernel module *

Does anyone know if you can have multiple TE110P cards in one chassis? -Thermal -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061011/adbceeb5/attachment.htm

Hello Everybody, I'm pleased with the progress of the wine project, it's been nice to move most of my work applications into Linux, and avoid using Windows all together. I am currently facing problems with an application called Kiwi CatTools (http://www.kiwisyslog.com). This application is a Network Management System that automates configuration archiving, mass-configuration

Hi, We have got a new PRI card at one of our Office locations and now I need to install the the device on a remote server. Is there any way to know if the device is loaded already. When I give " cat /proc/zaptel/* " it returns the following. # cat /proc/zaptel/* Span 1: WCT1/0 "Wildcard TE122 Card 0" (MASTER) B8ZS/ESF RED IRQ misses: 2 1 WCT1/0/1

Hi, I have asterisk behind my primary PBX connected via ISDN (chan_capi). Calling out and calling in works just fine, however I can't connect to my primary pbxs' extensions. If anyone has an example extensions.conf, I'd be grateful for a copy. I tried (the MSN of the ISDN card is set to 30) exten => 22,1,Dial,CAPI/30:22 but this does not work. Changing it to exten =>

Hello all, does anybody have experiences with DDI on ISDN BRI? I would like to order DDI with 10 or 100 numbers from telco company, and use DDI numbers for direct calling SIP/H323 clients. But I don't know if Asterisk supports it, in archive I found only one answer about it, and I'm not sure. I am going to use it with isdn4linux card. Maybe DDI is called differently in other countries,

Hi, I've just been made aware of Asterisk through the article on Slashdot. We're a small UK company with a ISDN-30 link to the office and a Meridian (Nortel) PBX. We're expanding and moving offices soon and I'm looking seriously at VoIP technologies. So starter for ten, can Asterisk interface in with ISDN-30 technology? I'm assuming the set-up is a server sat running