similar to: Dahdi and Junghanns QuadBRI

Hi, I'm using Asterisk 1.6.1.18 with latest Dahdi Linux and Tools (rev 8854) and libpri 1.4.10.2. During installation, I'm facing this : # dahdi_genconf -v system Default parameters from /etc/dahdi/genconf_parameters Empty configuration -- no spans Of course, I've got span descriptions in /etc/dahdi/genconf_parameters : .... pri_termtype SPAN/1 TE SPAN/2

The information (or lack of it) on upgrading from zaptel to that @&*^QW%&^%!!! dahdi is very frustrating. I cannot find anything on how to uninstall zaptel, i found an earlier post to this list which suggested make uninstall and make remove in the zaptel directory which just generates errors and does nothing (on zaptel 12.1). Then i install dahdi-linux and dahdi-tools and i want to

Hi, On a Lenny system, with dahdi 2.4.0, libpri 1.4.11.5 and asterisk 1.6.1.18, I inserted a new Digium HA8 + B400M card. My usual installation fails. I can see it listed : # lspci -n | grep d161 01:0b.0 0200: d161:8007 (rev 11) # lspci -vn 01:0b.0 0200: d161:8007 (rev 11) Subsystem: d161:8007 Flags: medium devsel, IRQ 22 I/O ports at d400 [size=256] Memory at

Looking for some help from the UK please. I backed up all my Asterisk configuration before re-installing the server from 32 -> 64 bit. Unfortunately I did not transfer the backup to another machine!!!!! I now have a TDM400P that is not picking up the line. Can you see what I have done wrong when I have rebuilt the config please: dahdi_scan ---------- [1] active=yes alarms=OK

Hello, 1. How can specify in /etc/dahdi/genconf_parameters file that a port from a B410P board is to be "disabled". Playing with comments (see bellow) doesn't help : file /etc/asterisk/dahdi-channels.conf is filled with 4 ports data. pri_termtype SPAN/1 TE SPAN/2 TE SPAN/3 TE # SPAN/4 TE 2. How can specify groups in

Hi, I'm using revision 6822 of Dahdi Tools. # dahdi_hardware pci:0000:05:06.0 wcb4xxp+ d161:b410 Digium Wildcard B410P # asterisk -rx "dahdi show version" DAHDI Version: 2.2.0.2 Echo Canceller: OSLEC # cat /etc/dahdi/genconf_parameters ... pri_termtype SPAN/1 TE SPAN/2 TE SPAN/3 NT SPAN/4 NT #

Hi, My genconf_parameter is : # grep -v "^#" genconf_parameters lc_country fr context_lines remote group_lines 1 bri_sig_style bri echo_can oslec pri_termtype SPAN/* NT (I also tried various identations and syntax for pri_termtype line such as bri_termtype but I still get the same output file). But still, generated system.conf contains

hello: thanks for Tzafrir Cohen for dahdi testing. I installed dahdi-2.1-r3c svn code and asterisk1-6 for testing OpenVox B400P and junghans card. i fund that there is bug (i think) to dectect NT or TE mode. actually on the board, i set it as TE mode, but after start wcb4xxp, but it show the port is NT mode. to detect the TE mode, I modefy the code in base.c

Hi, How to properly re-configure dahdi, when for instance I want to change from TE to NT mode ? I'm planning the following operations : /etc/init.d/asterisk stop /etc/init.d/dahdi stop rmmod dahdi rm /etc/asterisk/dahdi-channels.conf rm /etc/dahdi/system.conf rm /etc/dahdi/modules nano /etc/dahdi/genconf_parameters dahdi_genconf -v modules dahdi_genconf -v system dahdi_genconf -v chandahdi

Hi, I have a Junghanns QuadBri installed and seems to be detected and working correctly using the wcb4xxp driver All ports are configured as TE The problem is when I connect an ISDN line - the LED turns green and Dahdi status shows Alarm OK But when I try to make a call I get "All circuits are busy" cause 27 I have searched and web and tried numerous configs but it doesn't want to

Hello, On a very new system, I've got : # cat /etc/dahdi/genconf_parameters | grep -v "^#" lc_country fr context_lines remote group_lines 1 bri_sig_style bri_ptmp echo_can oslec pri_termtype SPAN/1 TE SPAN/2 TE SPAN/3 TE SPAN/4 TE # dahdi_genconf Empty

On Sat, Jan 17, 2015 at 09:31:33AM +0100, Bertrand LUPART - Linkeo.com wrote: > >>> However, dahdi_genconf keeps finding no span: > >>> What am i missing? > >> > >> It looks like your driver is loaded correctly. My guess would be maybe > >> the dahdi-tools is packaged as an older version that doesn't know > >> about the newer te435

Hey, anyone know if it's possible to receive faxes through a Junghanns bristuff quadbri card? In germany, currently I have faxes coming in on DID line into QuadBRI and then passing to Digium TDM400 (analog) and into faxmachine. But the reliability of TDM card is spotty, so I want to maybe just accept faxes in on ISDN card and save on asterisk system ...? keeping digital signal strong ...

Hello, Is anybody there using quadBRI form Junghanns.net with Asterisk ? I would like to order that card but first would like to hear some opinions. Thank you in advance Bartosz

Hi everybody I hope that somebody can help me with the following .... I have 2 quadbri cards 2 - 1t0 cards 1 pabx alcatel 4200 I would like to connect my asterisk to the alcatel , I installed bristuff 0.3.0-1p , loaded the zaphfc driver in NT mode configured zaptel and zapata , it works great. then I removed the 1 t0 card, added the quadbri loaded qozap : insmod qozap.ko ports=15 ( 4 ports

I installed the QuadBri card in my * server. I'm installing * on a RedHat 9 server I run the install.sh file. So far no problems. If I try to start /sbin/ztcfg -v -c /etc/zaptel.conf I will see the following error: Zaptel Configuration ====================== SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1) SPAN 2: CCS/ AMI Build-out: 399-533 feet (DSX-1) SPAN 3: CCS/ AMI Build-out:

Good afternoon, I have to develop an Asterisk system in Spain that can support up to 8 simultaneos ISDN calls (4 BRI), initially only 6 simultaneos calls. I have been looking into VOIP-INFO and I found that the Junghanns card QuadBRI is a very good option. But when I look for a server to develop the system, the information is a bit more confuse. Any one have experience with this card? Which

Hi All This may be a silly question but... I have this dahdi_genconf generated file: ; Autogenerated by /usr/sbin/dahdi_genconf on Fri Jul 4 22:05:29 2014 ; If you edit this file and execute /usr/sbin/dahdi_genconf again, ; your manual changes will be LOST. ; Dahdi Channels Configurations (chan_dahdi.conf) ; ; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended ; to

Hi, I have an asterisk box with a QuadBRI. I am close to make it work like I want: Incoming calls to SIP are OK, outgoing calls are quiet working thanks to Michael Sandee advices. My real problem is that my * box is freezing very often when I probe qozap (bri-stuff 0.0.2). I have tried two distribs (Debian Kernel 2.6, Mandrake 9.1 Kernel 2.4) and it always work for a few minutes and freezes. At

Hi, I've just discovered that dahdi_genconf could create configuration files reading a single genconf_parameter file. 1. Is using dahdi_genconf recommended to configure dahdi or is it a helpful tool for specific devices or installation processes ? 2. If not, is there a custom mecanism that would prevent hand-edited files to be written over by dahdi_genconf (you can obviously remove