similar to: Can't configure Cisco 7942 avec factory reset

Hello; I am facing a problem to let Cisco IP Phone 7942G register on Asterisk. The firmware has been downloaded from the TFTP successfully and currently I am running this load SIP42.9-3-1SR2-1S* I feel that there is a problem in the SEPMAC.cnf.xml but really I do not know which one to be used exactly. Basically, there is some effect that appears on the Phone (for example, it is appearing the

I've just recieved a copy of the new SIP firmware for the Cisco 7970, those of you with Cisco accounts may wish to try it (shock horror I'm sticking with SCCP). This coincides with the release of v8 firmware for all Cisco phones (and for those of you running Sergio's chan_sccp v8 works fine) The firmware is now also (and for the 7970 SIP, only) distributed in ".cop" files,

I'm trying to connect a Cisco 7942 to my Asterisk box. I have a 7960 and 7912 currently connected and functioning. I'm trying to use the recommendations from here: http://www.voip-info.org/wiki/view/Asterisk+phone+cisco+79x1+xml+configuration+files+for+SIP I have created a "XMLDefault.cnf.xml" and it took the latest image but the phone states it's unprovisioned? Any

As part of a project to move a clients Cisco phones to SIP to work with an Avaya system, I'm taking a Cisco 7961 we bought and adding it to our Asterisk setup. Now, I've gotten the firmware files from the site, the latest version is 8.4 which contains the following files: apps41.8-4-3-16.sbn cnu41.8-4-3-16.sbn cvm41sip.8-4-3-16.sbn dsp41.8-4-3-16.sbn jar41sip.8-4-3-16.sbn

Hi, I've downloaded for a demo, a P0S3-08-12.zip file which is suppose to work with 7960. Is it supposed to be the same file that the one needed to 7942 model ? At the moment, my 7942 is blocked when trying to download a P0S3-8-12-00.loads file. Regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

Anyone tried integrating Cisco IP 8841 phone with Asterisk 11.x. I have the phone with sip firmware came along with sip88xx-11.0.1SR xx. I tried to upload woth TFTP due to some reason it's getting failed. Do I need to load 3pcc firmware or anyway to Configure from the phone itself or from the GUI? I have the SEPMAC.cnf.xml as well. Any suggestions would be appreciated. Regards .

Hello, LLDP is more and more available on various network elements (endpoint, switches, ...). It seems to ease network configuration. Do you have any experience with it ? How would you rate LLDP ? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20091124/fce6307c/attachment.htm

True agree, problem is somehow the people purchased.... am supporting to overcome that. Trying level best... around 20 phones has been purchased.... ?? On Mon, 5 Dec 2016, 8:55 p.m. Victor Villarreal, <mefhigoseth at gmail.com> wrote: > With all the money you plan to invest in firmware, licenses, etc., you > have bought a Grandstream IP phone or Yealink... > -- >

Can't I upload the 3PCC firmware ? available from the Cisco website? Actually it came with sip88xx.... firmware. Regards . On Fri, 2 Dec 2016, 10:38 p.m. Steve Davies, <davies147 at gmail.com> wrote: > Hi, > > You have to buy the 3PCC version for this to work. Once you have this, > they work very much like the Cisco SPA handsets. > > I also ended up with a non-3PCC

Hi, Is it working for anyone? I have tried with trustrpid=yes sendrpid=yes/pai but can not get it working, Asterisk cli shows prevented message like this. Connected line update to SIP/1231-00000200 prevented Regards, Zohair Raza -------------- next part -------------- An HTML attachment was scrubbed... URL:

I have 7965 and am trying to convert the firmware to SIP (SIP45.8-3-4SR1S). Does anyone have a valid XMLDefault.cnf.xml they could share? I have tried the version at voip-info<info.org/wiki/view/Asterisk+phone+cisco+79x1+xml+configuration+files+for+SIP&view_comment_id=14768#Troubleshooting>for the 7941/7961 but unfortunately /var/log/messages shows in.tftp stops sending after

The documentation of how to use the 79xx series' phones and features with Asterisk is really hard to find and put together. The higher end phones like 7970 are more like converged PC+phone, a thin client to telephony and network apps. But it's really hard to target it as a development and deployment platform because the docs and techniques are so obscure. There seems to be a fair amount

Hello, I have been running SIP41.8-2-2SR4S firmware on the Cisco 7961 and have recently upgraded to SIP41.8-3-2SR1S to add the DND button on the front of the phone and also to hopefully resolve some issues with the phones not registering after a long period. Once we upgraded the phones now display "Error Verifying Config Info" in the Status messages and will not process the

Anyone aware of how to configure one call per line on a Cisco 7941/7961? The default behaviour is to have two calls per line button, and this is confusing for some of my users so I'd like to be able to have the 2nd call ring the second line button, rather than being shared with the first. I'm hoping this is something that is configurable in the XML or on the phone UI. Thanks Gary

Dear Asterisk People, I am having problems putting a SIP image on a 7970. I was wondering if anyone can help? First problem is the phone is running version Load IDJar70.2-5-47-17.sbn Boot Load ID7970_64054100.bin Version5.0(0.6S) So I did read that you couldn't simply put the latest SIP image on such an old phone and a newer firmware version should be used. I got

Hi, ? The current SCCP image on the 7942 phone is :SCCP42.9-0-2SR1S. We are trying to convert/upgrade the phone to SIP version of the firmware i.e : cmterm-7942_7962-sip.9-0-3 (Firmware is downloaded from the cisco support site). We have unzipped and placed all the files in the /tftp (root directory) of tftp server. Following files are also placed in the tftp directory. ? The Upgradation /

Hello all, I've got myself into a bizzare situation that I can't seem to get myself out of... Was wondering if anyone had some advice that might get me 'over the hill' on this... Some background: PBX consists of an Asterisk box (running TrixBox), 4 Cisco 7960's, 2 Polycom IP500's, and now an additional Cisco 7960. The phones are all on a separate LAN. There is

I found on the web that there is way to customize the softkeys for the 7941/7961 phones. In the SEP<mac>.xml there is a section called "softKeyFile" where you can specify an xml file for the softkeys. I couldn't find any examples of this softkey file or the format to this file. Does anyone have a call manager enviroment where they can look at this file and send me an

Prof Brian Ripley wrote: > This is intentional: it aligns the numbers. E.g. > > >options(width=12) > >print(c(1+1i, 1-10i, 1+100i)) > [1] 1+ 1i > [2] 1- 10i > [3] 1+100i > > Neat, eh? > > What made you think this was a bug? Ah ok, I've misunderstood this feature probably perhaps because, at first sight, I found the display looks "strange"

Hi All, I upgraded 7970 from SCCP to SIP. But the phone isn't registering. Have you got any working XML file for 7970 phones. Thanks..