similar to: Cisco 1751 setup with asterisk

I've Audiocodes MP-114 registered per-endpoint (2x FXO / 2x FXS) but when call comes on pstn-4444 it goes to context "fax-incoming" in sip.conf: [pstn-4444] type=friend context=incoming ... [pstn-9998] type=friend context=fax-incoming ... the device register per end point just fine, so it can find "secret=xxx" correctly but why the call is not forwarded to correct

Does anybody know if the process of upgrading firmware on "Linksys SPA3102-NA" in Linux is the same as on Sipura 3K as described on voip-info.org http://www.voip-info.org/wiki/view/Sipura -- #Joseph GPG KeyID: ED0E1FB7

I currently us Linksys/Ciscio, Grandstream and AudioCodes ata's. none of the three perform well in all enviroments. Between stablity issues, T38 and DTMF talkoff all three suffer some combination of issues. I am looking at Patton and Innomedia. Has any one tried either brand and what is your experience with them. Which would be the base for stability, audio quality, provisioning, DTMF

I'm looking for a reliable ATA FXO/FXS adapter. Linksys 3102 - a lot of echo problem + two of them died within a year (not reliable) Sangoma USBFXO - problem installing drive in Gentoo. I've tried two Chines units: AG-188N and YGW30B none are of them have real FXO port that will register with Asterisk. Any other recommendations; (I don't like internal cards). -- Joseph

Hi i am search a sample config (for asterisk and for cisco) for connect a cisco 1760 with a FXO card to my asterisk. Thanks for your help Jerome

Hello I am going to try the new Digium Fax for Asterisk product. I'm planning to connect fax machines to Asterisk (currently 1.6.0.9) via T.38 ATAs. I'm looking at Grandstream HT502 or Linksys SPA2102 ATAs. If anyone has any experience with these devices, or other recommendations, I would be grateful if you could share your experiences. Regards Ian

Anyone have much luck with these on ATA's? I have a few sites that use them succesfully with multi-port Audiocodes boxes, but just connected ten machines to Linksys 2102s and they are very flaky. Using u-law on a 100Mb switched network that is barely utilized, then out a T1 on a Sangoma card. Perhaps there is some tuning on the Linksys or the credit card machine itself? Going to look

Hello, I am new to this list and to asterisk and going through the archive file I did not find an answer to my problem. I have a VoIP network working fine with multiple gateways registered to a Cisco H.323 Gatekeeper. I have successfully registered Asterisk as a GW in that network and also successfully registered two X-Lite SIP Client to asterisk that call to each other. I want to connect to

Hello all, I post this issue thinking too that could help other people on an asterisk deployment over distributed offices considering both quality, prices, devices and so. Well, i am working on a deployment of a telephony system based in asterisk. My company have a central office with seven remote offices connected all through a VPN. To reduce and evaluate costs i consider solutions like:

I'm using "insecure=invite" with two different dial plans, it it working with one dial plan but not with the other. What other parameters could influence "insecure=invite" In sip.conf below "insecure=invite" is working OK [pstn-1270] type=friend secret=spa3k username=voice-1270 mailbox=369 host=dynamic insecure=invite canreinvite=no disallow=all allow=ulaw

I have AudioCodes MP-114 and I'm trying to configure SAS (Stand Alone Survivability); when Asterisk is down the MediaPack gateway should forward the call IN/OUT through the gateway (without asterisk in the middle), but it is not working. I'm working with tech. support from the source I purchase the unit from they we are just emailing back and forth and the unit is still not working. Can

Does anyone have the .bin file(s) to convert a Cisco 7940/7960 back to the CallManager image? I want to start playing around with the chan_skinny addition, but it seems the .exe's from cisco want to open a connection to a SQL server or CallManager (which I don't have).

I'm trying to setup my first Asterisk setup on a CentOS 5 installation on VMWare Workstation 6. Got two Linksys SPA941s working fine. But X-Lite softphones can't answer phone calls, and when one of them calls on of the Linksys phones they "connect" but neither party can hear hear the other. I noticed that the Linksys phones are connected via Native bridging while the

Off topic, but involves an Asterisk deployment in a roundabout way. Anyone here intimately familiar with Cisco Callmanager (Version 4-5), that can tell me where a directory of the standard system voice prompts for Callmanager might be obtained? I am looking for the text and filenames of the standard prompt set that ships with Callmanager, have been all over the Cisco site and I can't find it.

I have a asterisk server running on site listening on a public ip. Tonight I attempted to connect a Cisco 7960 phone from my home location via sip but failed. My home network is simple, Cox cable connection hooked to a linksys wrt router. The firewall on the linksys router is disabled and I even setup dmz to the phones ip as a last resort. I removed the linksys router and plugged the phone

I'm having problem powering Cisco phone's (7940 and 7905) on Linksys SRW224P switch (with PoE functionality). I have tested three phone's, one is working (7905) and two aren't (7905 and 7940). I have plugged all three phones on same switch port with same cable! Do I need to change anything in phone configuration? Is there something wrong with Linksys switch? How can I troubleshoot

We are currently moving away from a wide-spread Cisco CallManager deployment to Asterisk. For many of our small sites we have the routers configured for what Cisco calls SRST so if we have a WAN failure, the router acts as a SCCP registrar. We are converting to SIP, and from what I can tell Cisco wants a license for each router to run SRST over SIP... So my question to the group is: What are

Hello We have integrated cisco callmanager 4.1 with asterisk and we can dial from cisco to asterisk but we're getting an error if we call from asterisk to callmanager. This is the error I'm getting anybody can help me? Verbosity is at least 3 -- Executing Dial("SIP/2234-e084", "SIP/cme-pbx/4455") in new stack -- Called cme-pbx/4455 -- SIP/cme-pbx-25ae is

I've got a question regarding Cisco IP Phones and licencing. When using a third party PBX like asterisk is a licence required for the Cisco phones ? Has anyone got anything in writing from Cisco to clarify this ? Eg can I just use CP-7961G or do I need CP-7961G-CH1 even though I'm not using Cisco Callmanager ? HYPERLINK

Hi Siggi, > > 7960 and then "Call Ended" on the Display (curious about that !!!). > > That seems to be normal for the 7920. I've sniffed the registration > procedure with Cisco's newest 3.3(3) CallManager (+patches), and it's > doing the same thing. Maybe that's some odd way of testing if the > CallManager ("CCM") really works... >