similar to: Asterisk and QSIG

Hi, we are still trying to properly connect a Tenovis PBX to an Asterisk server (asterisk 1.2.6, libpri 1.2.2, zaptel 1.2.5, Digium Wildcard TE110P), this time with QSIG. Calling from a Tenovis phone to a SIP phone (i.e. traditional phone -> Tenovis PBX -> QSIG -> Asterisk -> SIP phone) works with the following messages: --- Don't know what to do if second ROSE component is of

Hello, Does anybody know if Asterisk can support QSIG protocols to be interconnected with a Traditionnal PABX? (Using a HFC chipset based ISDN card to emulate NT Interface) Thank you in advance ;-) Ignace

That was my impression as well, I tried adding switchtype=qsig in zapata.conf, but all I see is the capi information... No connection... Janne > -----Ursprungligt meddelande----- > Fr?n: asterisk-users-bounces@lists.digium.com > [mailto:asterisk-users-bounces@lists.digium.com] F?r Peter Svensson > Skickat: den 23 februari 2005 21:34 > Till: Asterisk Users Mailing List -

I have read most of Eicons information on Q.SIG, and I am able to load the Q.SIG protocol (instead of ETSI for example). No strange logging in divacrtl mlog. But how do I tell Asterisk to understand Q.SIG? My PBX is configured for QSIG, but I cannot see anything on my trace when trying to make a call via the S0(Q.SIG) Janne > -----Ursprungligt meddelande----- > Fr?n:

Hello all. I have installed and functioning asterisk-1.2.9.1 where I effected one upgrade in asterisk-1.0.9, is interconnected with a PABX Siemens HiPath 4000 in ISDN PRI with protocol QSIG, the one that is happening he is that the calls originated for PABX Siemens and destined to SIP phones asterisk are being without audio, nor Ring, is dumb. They could help in this case me? Best Regards Josu?

Guys, I need to make asterisk connect to another device over a pri using QSIG signalling (master/slave). Is this feasible and has it been done before? Thank you! al. _________________________________________________________________ Get ready for school! Find articles, homework help and more in the Back to School Guide! http://special.msn.com/network/04backtoschool.armx

Hello all. I have installed and functioning asterisk-1.2.9.1 where I effected one upgrade in asterisk-1.0.9, is interconnected with a PABX Siemens HiPath 4000 in ISDN PRI with protocol QSIG, the one that is happening he is that the calls originated for PABX Siemens and destined to SIP phones asterisk are being without audio, nor Ring, is dumb. They could help in this case me? Best Regards Josu?

Hello all, as good? It would like to make a question, asterisk supports the protocol qsig, for interconnections in ISDN with equipment Siemens HiPath 4000 or same Ericsson MD110, so that it could identify to the name and the number of hosts and also to use some features of asterisk in the Siemens/Ericsson equipment. Greetings Josu? -------------- next part -------------- An HTML attachment was

Hi, Is Asterisk "fully QSIG-compliant"? I currently have an Alcatel 4400 connected to Asterisk 1.2 and 1.4. Zaptel versions are 1.2.26 and 1.4.11. I am using switchtype=euroisdn and all works fine. However, it seems that Alcatel's latest firmware has dropped support for euroisdn which is really despicable. So now I need to see if I can migrate to QSIG which is supported by

Previously incorrectly sent to asterisk-dev list, sorry. I tried today while connected to a Jtec QSIG E1 card, with DAHDISendCallreroutingFacility with the following test dialplan: Extension 4888 is on the Fujitsu [incoming] exten => 8688,1,Answer() exten => 8688,n,Playback(connecting) exten => 8688,n,DAHDISendCallreroutingFacility(4888,8688) exten => 8688,n,Playback(goodbye)

Hello I'm looking for a wayy to modify extensions.conf It seems that PutConfig AMI command is not supposed to work on extensionsq.conf Any ideas? Thanks Vadim

I am looking to get the info about QSIG support in Asterisk. Does Asterisk have QSIG support? Does Asterisk support QSIG SIP Tunneling or QSIG SIP Interworking? If so, How to configure that? Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060503/3cb7f966/attachment.htm

[Reposting, as was bounced for non-member, sorry if this is a dupe] Arrangement: { PSTN }--E1--[PBX]--E1--[*]--LAN--[SIP phones] \__[PBX system phones] Normal calls between PBX system phones and SIP phones work, in both directions. The call logs look like (ignore the no answer, it did ring):

Hello, If I connect an Asterisk 1.6 to a PBX via Q.SIG and A (on the PBX) calls B (a SIP phone on Asterisk). B answers and puts A on hold. Then B calls C (on the PABX) and does an attended transfer. Is it possible to configure Asterisk so that it does the Q.SIG ?Path Replacement Feature? ? The Q.SIG "Path Replacement Feature" requires the following: After both legs of the

Hello to all, I have a problem with an asterisk qsig. I have three machines: Nortel CS1000 --- Card Sangoma PRI ---> Asterisk QSIG ---SIP Trunk---> Asterisk I use Snom phones on Asterisk. If I call from Asterisk to Nortel, Nortel reminds me of the name of the person i'm calling and I visualize on the display of Snom phone, but if I call from Nortel to Asterisk, the QSIG does not send

Hi all, I'm planning on connecting our Asterisk to our legacy PBX (an Avaya INDeX). I was originally going to sit it between our ISDN connection and the INDeX (tried it, worked ok) but now I intend to hang it off a spare PRI card just so should the * fail we keep our ISDN's at the INDeX, yes I've looked at ISDNguard but little info from the manufacturers. Anyhow, I'm now

Hi All, Our experience with * to date has been a bit limited. It's a 4xCisco 7960 network, linking our head office with a faraday caged datacenter. As a way of putting voicecomms into a sealed room, it was quick and easy to deploy, and works very well. As typically happens, we've now thought about extending the use of asterisk - and a new opportunity has cropped up. In three months

Hey, we're running an asterisk system connected to another telco system using qsig. I'm currently trying to use ChanIsAvailable to get the current phone status out of the foreign system. ChanIsAvailable always return "0" - UNKNOWN. The Qsig protocoll itself supports the feature to query the status of a given phone. Is there any other way beside to use

I have installed an Asterisk 1.4 on Suse93 using a FritzCard. Some calls are logged to the ISDN log, but Asterisk is not detecting incoming calls. I wonder whether some other device or process is preventing Asterisk from gaining access to the isdn line? Is there some way to ensure that only Asterisk can listening to the line, or get it to share the line with some other device, such as the fax

I have been asked by a potential customer whether we can connect an Asterisk box to an Ericsson MD110 that has an E1 port with ISDN-USR. They are unable or unwilling to upgrade their E1 port to QSIG. Has anyone here had experience of successfully making such a connection? I have found a couple of hits on Google that suggest it "should" work, but I'm after something a little more