similar to: Duplicate DTMF

Hi. I have a SIP provider which wants RFC2833 for the dtmfmode, however I would like to increase the duration of the tone, its pretty short and some IVR's are unhappy or don't detect it. I did poke around, but it looks like when RFC2833 is used, it actually generates rtp packets of some sort, so I have no idea how to increase that duration. Any assistance would be appreciated. -- Your

mailboxes). Are you certain that removing either 612 or 610 mailbox would keep Asterisk from complaining ? > > However, the MWI does not indicate voice mails for 610 and I keep seeing > this error message: > > ERROR[2549]: app_voicemail.c:1630 messagecount: Couldn't find mailbox > 610 in context a10 > > However, mailbox 610 is clearly defined in voicemail.conf: >

Hi All, Anyone have any idea what could cause incoming calls on a SIP channel to no longer be able to use DTMF? DTMF on incoming calls on zaptel and on local SIP softphones and ATAs all work fine. Nothing gets registered in the CDR or on the console in verbose level 10, it just times out. I haven't changed anything on my part and can't get through to Viatalk tech support to ask them

Hello, all. I have a user who needs to monitor their voice mail box and the general delivery voice mail box. I defined them in sip.conf as follows: [tkeeley](a10f) mailbox=612 at a10, 610 at a10 However, the MWI does not indicate voice mails for 610 and I keep seeing this error message: ERROR[2549]: app_voicemail.c:1630 messagecount: Couldn't find mailbox 610 in context a10 However,

Hello, all. I'm afraid I've been dropped into the deep end even though I am an Asterisk novice. I've set up a few tiny, tiny systems in the past and have now been asked to pull together Asterisk, FreePBX, Kamailio, RTPProxy, and Fedora Directory Server into a VoIP service. After googling and reading for most of the last 24 hours, I finally have my head around the components and how

Dear All ~ I have * setup & running ok (with two Wildcard X100P's to PSTN). I also have two analog phones connected into same through a SIPURA 2000. These work fine, except that when I call out through PSTN & try to send DTMF tones to (say) a remote PBX to dial an extension, the gain seems to go wild (high), and the DTMF tones are not recognized at the other end. I tried setting the

Hello, all. I'm running Asterisk 1.6.1.6 on CentOS 5.3 in a multi-tenant environment with IMAP voice mail storage on Zimbra. One of our clients is having a problem when transferring voice mails from one mailbox to another (option 8 in the standard voice application menu) using their Snom 320 and 360 phones. The end results is the final recipient cannot listen to the voicemail. We also email

Wondering if anyone has experienced an intermittent one way audio (called party can not hear) problem in these conditions; Several IP501 phones local, same subnet. Remote asterisk No NAT anywhere Polycom IP501 ulaw only, canreinvite=yes Asterisk Call termination path is to a sonus GSX operated by the upstream carrier, ulaw only, canreinvite=no The idea is that if the Polycoms are

Hello, all. I see there is an "o" option for the Dial() command which reverts to the previous behavior of using the original callerid throughout the call - I suppose more specifically, using the callerid from leg 1 for leg 2 in B2BUA if I understand it correctly. That seems to be highly desirable behavior; I know we are seeing some problems with call history and call forwarding because

Im trying to configure voicemail, but asterisk doesnt respond to dtmf codes. I uses kphone with g711u codec (I've tryed the others one) and in sip.conf I configure dtmfmode=rfc2833 (I've tryied inband and info). Asterisk seems not to "see" the tones. Could somebody help me? Thanks

Hi Tom, Thank you for your informative and helpful reply. I had considered using the relaxdtmf setting but held off this due to not using any physical connection hardware -Asterik uses both SIP in and out from an upstream provider (Gradwell.com). Is it still possible to set this when using SIP trunks only and not physical hardware? The box does have a Digium ISDN card but the ISDN is no longer

Hello folks, We have an issue with several Cisco SPA512G phones connected to an Asterisk platform where several users hear loud, random beeps during calls to external recipients. The noises are akin to button press tones, are very loud and a significant annoyance. I've tried changing the DTMF tones on the phones (512G's running firmware 7.5.5) from In-Band to every other possibility,

Hello, all. I've been playing with MeetMe and talker optimization seemed like a great idea. I activated it as follows: exten => 201,1,MeetMe(100201,cTo) However, although I can see who is the talker on the CLI pbx01*CLI> meetme list 100201 User #: 01 1001 Denise Dion-Sullivan Channel: SIP/1001-1e1db7c8 (not talking) 00:00:33 User #: 02 1000 John A. Sullivan III

Hello, all. After reading the README, UPGRADE.txt, and a quick tour through google, is it safe to assume to upgrade from 1.6.1.1 to 1.6.1.2, one simply compiles and installs over the old installation being careful to NOT install the sample files? Thanks - John -- John A. Sullivan III Open Source Development Corporation +1 207-985-7880 jsullivan at opensourcedevel.com

On Wed, Feb 4, 2009 at 4:00 PM, Gregory Boehnlein <damin at nacs.net> wrote: > Hello, > Is anyone running Asterisk 1.4 w/ RFC2833 to Level3's SONUS network? > We are unable to get reliable RFC 2833 DTMF working, and have instead had to > use G711ULAW w/ INBAND DTMF to get around the issue. Looks like an issue on > the SONUS side. > > Anyone else have this

Hi, I am using asterisk 1.4.17 which is connected to a SIP trunk supporting rfc2833 dtmf events. Asterisk stays in the media path. In sip.conf I have set dtmfmode=rfc2833 for the outbound sip proxy (SIP Trunk account) and for SIP clients I have set dtmfmode=info. So when I make a call to a cell number using the sip trunk and then press digits I can see the 2833 dtmf events coming to asterisk

Ah I see, in theory it's possible then. We don't have any IVRs or anything which requires key presses, there isn't even voicemail on this particular phone system so I don't think it will be too much of a problem. I've also updated the firmware on the Cisco phones that have had the issue, just to see if that solves the issue but as it's been going on for a while, I'm

Hello, all. After many pages of googling and testing in the lab, I'm still a bit perplexed about how to implement tls protection for the asterisk manager. manager.conf allows one to specify the cert file but one normally must also specify the private key file. If I simply enter the cert file: sslenable=yes sslbindport=5038 sslbindaddr=172.x.x.8 sslcert=/etc/pki/tls/certs/pbxc.pem ; path

All, Having problems terminating to a Nuvox PRI, the tech at Nuvox is saying Asterisk is transmitting in CCITT (aka ITU?) when they're expecting (and will only accept) ANSI. The question is, is there a simple way to change this or am I stuck with rewriting code? I googled and checked the mailing list and found nothing, I could be barking up the wrong tree I guess. PRI is not my forte.

I got no resonses to this and some funny bounces so I'm trying again. First of all Merry Christmas. Second, my first problem with my provider not staying registered with our server was my fault. We moved our server room and I restarted the test system and the production system causing them to ping-pong back and forth registering with our provider causing random problems, they are both