Displaying 20 results from an estimated 1000 matches similar to: "chan_dahdi.so fails to load : Inappropriate ioctl for device"
2009 Mar 10
3
configuring channels for dahdi
after installing asterisk 1.4.23.1 and dahdi-linux-2.1.0.4 and at CLI> module load chan_dahdi.so receive the following:
signalling must be specified before any channels are.
CLI> Warning [4663]: chan_dahdi.c:11627 process_dahdi: Ignoring signalling
Error[4663]: chan_dahdi.c:10946 build_channels: Unable to reconfigure channel '1'
Error[4663]:
2009 Nov 11
1
TE121 - Idle system load at ~0.3 - Bad DAHDI 2.2.0.2 behaviour ?!
Hi Asterisk Users,
We've been experiencing some tough time regarding a new Asterisk installation
connected to the PSTN via an ISDN PRI with a Digium TE121 with the optional
VPMADT032 echo cancellation module.
For now, I'll focus on something very specific which is summarized on this
email's subject.
However, here are some general facts for the context:
- System pbxfri went
2010 Jan 18
0
TDM2400P "Unable to set SW Companding on channel .."
Hi:
I?Bought TDM2400P ,with 24 FXO ports , I installed? the asterisk 1.4.28 and?dahdi 2.2.0?and then i compiled them and configured all, i pluged into 8 pstn line into the Rj connector and then i got messages on asterisk console that alarm cleared on channels 1->8??, at this step everything should go fine ,but when i try to make a call?through the TDM?there is silence and no audio,and then i
2009 Aug 14
1
chan_dahdi refuses to build
Using asterisk 1.6.2.1 and dahdi 2.2.0.2. dadhi-linux installed just
fine. Using dahdi_dummy as there is no card in system. Did not install
libpri, again, no card.
When compiling asterisk, I include -with-dahdi and everything
./configure's fine but when I do 'make', everything goes fine but
chan_dahdi doesn't get compiled. No errors. No warnings. It just skips
it for some reason.
2020 Sep 06
0
dahdi_cfg -vvv error , PRI show spans command not found
dahdi_cfg -vvv error `cut: '/sys/bus/dahdi_devices/devices/pci:0000:01:00.0/spantype': No such file or directory`
PRI show spans --command not found
test call not working.
-- dahdi_genconf -vvv
Default parameters from /etc/dahdi/genconf_parameters
Generating /etc/dahdi/assigned-spans.conf
cut: '/sys/bus/dahdi_devices/devices/pci:0000:01:00.0/spantype': No such file or
2009 Aug 25
2
Echo
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
</head>
<body bgcolor="#ffffff" text="#000000">
I recently upgraded my Asterisk system to Dahdi and now I have an echo
<br>
problem.
<br>
<br>
I am running Asterisk 1.4.25 with Dahdi Complete 2.2.0, on a Digium
<br>
TE121B PCI express
2010 May 27
2
BRI card(B800P) doesn's work with DAHDI(wcb4xxp) in NT mode
Dear Supports,
I was attempting to install BRI Card(OpenVox B800P) with wcb4xxp in NT mode .But I can not make it worked!
Could you please give me some hints? Thanks in advance!
Here are my environments:
------------------------------
CentOS-5.3
Kernel-2.6.18-164.el5
asterisk-1.6.1.6
dahdi-linux-complete-2.3.0+2.3.0
libpri-1.4.10.2
OpenVox-B800P(the first port is spliting into
2010 Aug 10
1
PRI D-channel bouncing
I need some help getting a system running for one of my company's
plants. I am running AsteriskNow 1.7 with Asterisk 1.6.2.10 and
FreePBX 2.8.0.2.
My D-Channel keeps bouncing. The telecom tech told me he thought that
I might be using the wrong sync source, and I think I might have been,
but I changed DAHDI system.conf to "span=1,1,0,ESF,B8ZS" (from
2009 Sep 04
1
1.4.26-2, DAHDI-2.2.0, B410P and BRI
Hello everybody,
I try to install -Ubuntu 8.04 server- a B410P and a TDM2400P together
with Asterisk 1.4.26-2, dahdi-linux-2.2.0.2 and dahdi-tools-2.2.0.
Problem I face is the following one:
CLI> module load chan_dahdi.so
== Registered application 'DAHDISendKeypadFacility'
== Registered application 'ZapSendKeypadFacility'
== Parsing
2013 Nov 23
1
DAHDI Missing '/sys/bus/astribanks/drivers/xppdrv/sync'
Hello group,
I am installing Asterisk on a new pc running Ubuntu 12.04.3 Server. ?I have dahdi-complete-2.7.0.1+2.7.0.1, and have tried 2.6.1 and 2.8.0-rc1 and 2.8.0-rc2. ?I am following along in the ASTERISK The Definitive Guide 4th Edition and on page 116 when I issue the command $ sudo /etc/init.d/dahdi start I get the following error:
Loading DAHDI hardware modules:
? ?wctdm24xxp: done
2009 Apr 11
1
asterisknow 1.5 with X100P and TDM400P
Hi All,
Sorry if this has been around a millions times.. I have been off this
list for a few months now..
I have installed the latest asterisknow (upgraded asterisk to 1.6 as
well) and I am having a hard time getting my X100P and TDM400P working..
Its all new to me with dahdi because my old server is still running
Asterisk 1.0.2 so there have been lost of changes..
Can someone point me in
2009 Dec 24
0
X100P clone card problem
Hi,
I have problem with X100P clone card.I can not force it to work
under Asterisk 1.4.27.1 and DAHDI Version: 2.2.0.2.
I looked over and over on configuration and could not see any mistakes.
Here are relevant configuration files.
/etc/dahdi/system.conf
> fxsks=1
> echocanceller=mg2,1
> loadzone = hu
> defaultzone = hu
>
dahdi_tool
> OK Wildcard X100P
2010 Sep 01
2
Freepbx + Asterisk problem - NEED HELP
Hello,
After installing on Ubuntu 10.04 using the tutorial on
http://hmontoliu.blogspot.com/2010/03/installing-asterisk-and-freepbx-on.html
I have a running instance of Asterisk.
PROBLEM: result of dahdi_cfg:
DAHDI Tools Version - 2.2.1
DAHDI Version: 2.2.1
Echo Canceller(s): MG2
Configuration
======================
Channel map:
Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2)
2010 May 23
2
Dahdi problems with kernel 2.6.32
Hi. I am having problems with dahdi using kernel 2.6.32. I am using
2.6.30 kernel and it works fine -- here is the output of dahdi_cfg -vv
++ dahdi_cfg -vv
DAHDI Tools Version - SVN-trunk-r8670
DAHDI Version: SVN-trunk-r7445M
Echo Canceller(s):
Configuration
======================
Channel map:
Channel 01: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01)
Channel 04: FXS Kewlstart
2009 Jul 03
0
DAHDI CDR problem
Hello gang,
We just got MaBell to turn on our callerid. I tested the
capability with a southwest bell box and a plain phone, so I know the line
is sending the signal. I'm running Asterisk SVN-branch-1.4-r204834 using a
TDM400P card. Here is my dahdi_cfg -vv output:
dahdi_cfg -vv
DAHDI Tools Version - 2.1.0.2
DAHDI Version: 2.1.0.3
Echo Canceller(s): MG2
2012 Feb 27
0
dahdi timing
Hi,
We heavily use meetme/SLA functionality in Asterisk, and continuously run into issues with dahdi timing. The two errors we get are:
ERROR[6518] res_timing_dahdi.c: Failed to configure DAHDI timing fd for 0 sample timer ticks
WARNING[22024] app_meetme.c: Unable to write frame to channel
Right now, dahdi in our setup uses the software timer (with res_timing_dahdi.so which gives much better
2010 Oct 01
0
debian/dahdi/zaphfc - Unable to receive TEI from network!
Hello,
The harddisk of my etch/bristuffed asterisk1.2 box finally died. I moved
the cheap (1397:2bd0) HFC-S card to a squeeze host (i686) and built
dahdi modules 2.3.0.1 using m-a. After zaptel->dahdi and asterisk
1.2->1.6 config adaptations, everything seems ok, except for the BRI
side, unable to bring layers 1/2 up.
Asterisk reports:
chan_dahdi.c:12393 dahdi_pri_error: 1 Unable to
2013 May 27
2
RED on DAHDI channel
Asterisk 11.1
We have a situation where one of our incomings POTS lines will not
answer. There are 2 lines configured by the Telco as a rollover group
(rings the line that is not busy) and they feed into a Digium AEX410 on
the server. The most recent time this happened, I did a
/etc/init.d/dahdi status and saw this:
### Span 4: WCTDM/1 "Wildcard AEX410"
*53 FXO FXSKS
2009 Aug 24
2
install the digium card TC400P howto?
Hello,
I need help to install a digium card TC400P.
I compiled the dahdi source, but dahdi don?t find the card!
debian:/usr/src/dahdi-linux-complete-2.2.0.2+2.2.0# lspci
11:03.0 Ethernet controller: Digium, Inc. Wildcard TC400P transcoder base
card (rev 11)
debian:/usr/src/dahdi-linux-complete-2.2.0.2+2.2.0# /etc/init.d/dahdi
restart
Unloading DAHDI hardware modules:
2011 Jan 12
2
'ioctl:: Inappropriate ioctl for device' when trying to shrink partition
E.g. btrfsctl -r -4000m /dev/sda5
results in:
ioctl:: Inappropriate ioctl for device
Distribution: Ubuntu 10.10
Kernel: 2.6.35-22-generic
According to the Synaptic Package manager, the version of btrfs-tools is
0.19+20100601-3
Other information that can be of interest:
- I started Ubuntu on a live CD
- before invoking the btrfsctl command I invoked apt-get update.
I have googled but have not