similar to: AGI with queues status

Hello I have an old Asterisk where I need to listen to Agent calls. So I created this code: exten => _555,1,ChanSpy(Agent) exten => _555,n,Hangup() But I always get: 2009-10-22 16:00:38 WARNING[5695]: pbx.c:1720 pbx_extension_helper: No application 'ChanSpy' for extension (default, 555, 1) It seems that Asterisk doesn't have ChanSpy enabled... is this possible? Which

Hello I'm trying to register an Asterisk working behind Nat. Here is the trunk: register=username:password at sip.startel.pt [startel] type=peer host=sip.startel.pt username=username fromuser=username secret=password qualify=yes disallow=all allow=ulaw allow=alaw allow=gsm insecure=very port=5060 nat=yes canreinvite=yes The problem is: Asterisk is registering with its

Hello Im using Asterisk as a SIP client of Kamailio with RTPproxy. Asterisk is behind NAT. X-Lite and SNOM phones behind NAT work fine. But when I try to connect with an Asterisk behind NAT, the Asterisk client doesn't receive sound. I already tried in 2 different NATs, with no firewalls. This is my Asterisk config: [kamailio] type=peer host=xxx.xxx.xxx.xxx disallow=all allow=ulaw

Hello to all I'm using asterisk 1.4 and dahdi. I had everything working fine, and I could place calls through my R2 channel. But now the channel is always "RED" and Im getting this error message: TE4XXP: Version Synchronization Error! Here is my chan_dahdi.conf------------------------------ [channels] language=en context=incomingr2 signalling=mfcr2 mfcr2_variant=ar

Hello to all I'm trying to record the calls going to my queues, but asterisk creates 2 files, one with the inbound and another with the outbound sound. I know Sox should mix the 2 files automatically in the end, but this isn't happening. I have sox installed in my server. How can I force Sox to mix the files? Here is my config: queues.conf----------------------------- [general]

Hello: I have the linux version 2.0 of x-lite downloaded. Does anyone know exactly what settings needed to reach the asterisk server on my home network? Internet ->DSL transparent bridge ->router ->asterisk ->softphone x-lite attempts to login and register, but times out. There must be some setting I'm

I wonder if Asterisk's skinny/sccp channel driver could be used as a "client" to register with a Cisco PBX. That is, along with a SIP client, say, have Asterisk and said SIP client stand in for a Cisco phone, or an IP Communicator. Anyone done this? Cheers, b. -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type:

Hey gang, I'm trying to find a) If you can put channel variables into a Call file and b) what the appropriate syntax is. Any ideas? Thanks, PB -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090721/cb8c2656/attachment.htm

hi, i have a new install, 1.6 2, 2 extension, but the call doesnt get thorugh: here is my sip debug outout: thx for ur help!! <asterisk-users at lists.digium.com> --- (13 headers 16 lines) --- Sending to AA.BBB.CCC.DD : 28127 (NAT) Using INVITE request as basis request - Y2QxNTg4NjE3MTZjNGMzZGM5NzE3YWY4NjAyOTYzMjk. Found user '701' for '701' Found RTP audio format 107 Found

Hello I just updated the kernel, dahdi-linux and dahdi-tools Im also using now asterisk 1.4.26.1 And im still with a red light (not RED/YELLOW anymore): [root at catumbela ~]# /etc/rc.d/init.d/dahdi status ### Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER) HDB3/ RED 1 PRI CAS RED 2 PRI CAS RED 3 PRI CAS RED 4 PRI

Hi all, We have our system hosted publicly and 4 phones are connected remotely at employee's home, and when they try to do a assisted transfer to one of the employee at the main office, the call is lost. For ex: person A calls person B, person B calls person C for assisted transfer, and as soon as person B hits transfer button again to transfer person A to C, the call is lost. But in the

Hello I have a simple configuration to allow the admins to listen the agents calls: exten => _654,1,ChanSpy(Agent) exten => _654,2,Hangup() The problem is... even when the agents hung up... it seems the channels remain active: asterisk*CLI> show channels SIP/211-b3042018 654 at default:1 Up ChanSpy(Agent) SIP/211-b3fbf768 654 at default:1 Up ChanSpy(Agent)

Is it possible to implement a dial-out call queue in Asterisk? My idea is to give Asterisk a list of numbers, and then he makes the calls and delivers the calls to a call queue. Then, the agents will answer the calls. Is this possible? Thanks Regards Joao pereira

Hello I'm using eyeBeam, and Asterisk keeps sending my clients a second call, when they are still in one call (because eyeBeam has lots of channels). I was using X-Lite (with 3 channels) and Asterisk never sent the client a second call. How can I force Asterisk (or eyeBeam) just to send one call at each time. Is this a configuration I need to do in eyeBeam or Asterisk? Thanks Regards Joao

I''ve attached the preliminary patch to add vncviewer options to the ''xl create''. It applies cleanly against c/s 4e1d091d10d8. All feedback is welcome. Goncalo # HG changeset patch # User Goncalo Gomes <goncalo.gomes@eu.citrix.com> # Date 1332257809 0 # Node ID 46f8afe643dee8de2c592c65204567fbad657616 # Parent 4e1d091d10d83130842170cd61f1194e5459f2aa Add

Hello list, Im writing my dial plan, in witch every SIP phone begins with 74 and has more 3 numbers (like 74XXX). So, I want to route all 74XXX calls to my sip channel. For this I wrote this line: exten => s,1,Dial(SIP/74118@193.136.252.5,30,r) but this way all calls go to 74118@193.136.252.5 ..... Then I tried: exten => s,1,Dial(SIP/${EXTEN}@193.136.252.5,30,r) but this way, the

Hello, Realized update dovecot on my server. Now the search is returning differently from the previous version bringing reference information of other messages . For example when doing a search for anderson.joao this new version of the dovecot dovecot 2.2.21 + fts - Solr response will be all email that has the word anderson and joao, instead of returning only items with the word anderson.joao.

Hello Team, IVR selection of QUEUEMETRICS As we know queuemetrics had an IVR selection functionality where it can get the IVR keypress of a caller. We saw this link http://forum.queuemetrics.com/index.php?action=printpage;topic=503.0 and upon checking, its only determined the Queue, I want to get is the per IVR of a caller. Can you help me guys regarding this? I want to implement this with

I have configured call pickup, and this works fine. Although there are 2 problems, perhaps anyone would know a solution to this; - When I pickup a call from another set, the *8 code keeps being displayed in my screen (Snom 220). I would like it to show the phonenumber of the person calling me. - When a caller that I've answered through Call-Pickup disconnects, my phone does not close

On 2 June 2016 at 19:50, Richard Gomes via llvm-dev <llvm-dev at lists.llvm.org > wrote: > Since the APT repository is down... everything under that location is > unavailable, including the instructions on how I could build/install > LLVM/clang from sources. Could you guys advise, please? > You can quickly start here... http://clang.llvm.org/get_started.html at least until we