Displaying 20 results from an estimated 3000 matches similar to: "How to restrict registrations by useragent?"
2010 Oct 20
4
Recommendation for a new server
Hello list,
What servers would you suggest for:100 concurrent SIP calls, 4xT1 card, and
a not much busy website, i.e. getting 500-1000 hits a day.
Thanks,
Zeeshan A Zakaria
--
www.ilovetovoip.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20101020/8ab7ae3e/attachment.htm
2010 Oct 23
3
Cepstral voice quality not good
Hello list,
I have been using Cepstral's 8KHz voices for my text-to-speech service for
some time now, and have been noticing that the voice quality is really poor,
doesn't matter what phrase I give it to convert. None of the other 8KHz
voices I have ever used were this bad. It doesn't seem good enough system to
be used in a commercial system. Is there any better quality text-to-voice
2010 Oct 18
5
Same extension registering over eth0 and eth1
Hello list,
I need to know how to deal with a redundant network with only one asterisk
server, which is receiving registrations from the end points on both of its
ethernet ports. This means extension 201 is registering both from eth0 and
from eth1.
Is there a way/software which can act as a middle man between asterisk and
the ethernet ports, and by default sends registrations to asterisk only
2008 Oct 17
5
How to add contexts in asterisk realtime?
Hi everybody,
How can we add new contexts in asterisk realtime module? All I could figure
out after googling is that a new context HAS to be declared in
extensions.conf with 'switch => Realtime/@<databasetable>' under the context
name declaration. This works fine as long as we are adding extensions only
to this one context, but doesn't give the freedom to add new contexts for
2010 Mar 18
6
Asterisk DIES with no trace. PLEASE
Thanks Zeeshan,
SAngoma told me that the asterisk problem is unrelated to wanpipe drivers,
they told me to reinstall asterisk again
But, i still having doubts about the problem :(
Thanks in advance
>
> Message: 10
> Date: Thu, 18 Mar 2010 00:21:06 -0400
> From: Zeeshan Zakaria <zishanov at gmail.com>
> Subject: Re: [asterisk-users] Asterisk DIES with no trace. PLEASE
>
2009 Jul 11
2
Suggestions for web based soft phones
For a while now I've been looking for a good web based soft phone solution,
but so far no luck. A few solutions which I've tried, both Java based and
Flash based, either don't work, or had bad sound quality. I need something
which I could put on my productions server for my clients.
Seems like good web based solutions are all paid ones, nobody is giving it
for free. Any ideas,
2011 Jan 21
4
Does Asterisk support NI-1 (DMS 100) and NI-2 for T1s?
Hi list,
For a client I am setting up a system which will use T1 PRI from Primus, who
offer only NI-1 and NI-2 protocols for D-Channels. Previousely I have only
used switchtypes euroISDN and National. Although the documentation says
Asterisk does support NI-1 ans NI-2, but wanted to get your opinion if you
have used these protocols on an Asterisk box and if there were any things to
consider. If
2009 Jul 14
3
Why CDR is recording dst value = h?
For a new project, I have written a dialplan and it is pretty straight
forward: The [dialout] context dials out a number, and h extension in this
context writes the CDR. But what is happening is that if the callee hangs up
first, all values in the CDR are fine, but if the caller hangs up first, the
'dst' column is always 'h'. I put a NoOp right in the begining of this macro
to
2010 Jun 28
2
restricting sip users to a certain useragent
Greetings list,this question is rather a pain in my side.. i have been trying to figure it out.. it could be simple.i have a customer with a callcenter .. we developed a CRM "Customer Relations Management" with an SIP dialers built in.the question is the following.. is it possible to force the agents (users) to use a certain UserAgent which is the one built-in our system? this way will
2007 Jul 18
5
In Vancouver is it a local to call from 778 to 604, and vice versa?
I've got a 778 DID for vancouver, but don't know if it will be a local call
if dialed 604 and vice versa.
What are the different area codes in Vancouver and why its easier to get 778
DID than 604?
--
Zeeshan A Zakaria
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
2010 Sep 14
6
How different is implementing Cisco based system than Asterisk based system?
Hello list,
Slightly off the list topic, but I hope I'll get some help here. Somebody
wants me to implement for his project a Cisco based VoIP system. I told him
that I specialize in Asterisk based systems, but he is not even aware of
Asterisk. The requirement of project is such that chances are slim that this
firm will consider Asterisk based system. So I told him that though not
experienced
2010 Oct 16
6
Remote Unix Connection
Hi,
Does anyone know where this is suddenly coming from?
-- Remote UNIX connection
-- Remote UNIX connection disconnected
-- Remote UNIX connection
-- Remote UNIX connection disconnected
-- Remote UNIX connection
-- Remote UNIX connection disconnected
Thanks
Dan
p.s. sorry about the last post. hit the mouse by mistake and it sent the email.
-------------- next part
2010 Oct 30
8
Under heavy attack
My main asterisk server is under unusual heavy attack, and so far Fail2Ban
has blocked about 30 IPs, from various different countries. At this time it
is blocking about 1 IP address every few minutes.
Just wondering if anybody else is also experiencing unusually increased hack
attempts today?
Zeeshan A Zakaria
--
www.ilovetovoip.com
www.pbxforall.com (beta)
-------------- next part
2010 Jun 15
4
can't seem to register, status unmonitored
Hi everybody,
I am trying to register my softphone(twinkle) on an asterisk server.
Everything seems to be fine.
Here is the output on show registrations in twinkle:
Tue 18:57:51
nikhil: you have the following registrations
<sip:2001 at 172.26.48.208 <sip%3A2001 at 172.26.48.208>>;expires=3013
208 is ip of the asterisk server.
on the server on doing 'sip show peers' , it
2010 Mar 26
7
Asterisk load balancing and failover
Hi List,
I'm finding a solution to provide failover and load balancing features to my IVR system.
Anyone suggest me what is the best solution please?. what the hardware I should use ?.
I heard about RedFone, but someone on the mail list said that it is not good because TDMoE module in asterisk is not so stable and TDMoE is stale. And It seems that RedFone doesn't not support load
2010 Dec 15
2
Recommendation for a Linux based SCADA
Hi list,
For a telecom project I need to setup a SCADA solution. I don't have any
previous experience in this type of monitoring and automization. I'll be
using SNMP data from asterisk servers and endpoints. If anybody has any
suggestion which SCADA software can fit in such a VoIP solution, your
guidance will be highly appreciated.
Thanks,
Zeeshan A Zakaria
--
www.ilovetovoip.com
2009 Jan 19
1
Need help registering Cisco 7960 Phones on Asterisk
Hi everyone,
I googled this followed the instructions, but it hasn't work for me yet.
I have universal setting in SIPDefault.cnf and phone specific settings in
SIPXXXXXXXXXX.cnf. But it doesn't get registered.
I need to register it on two different asterisk boxes. So my
SIPXXXXXXXXXX.cnf looks like this:
phone_label: "Zeeshan A Zakaria"
line1_name: "523"
2006 Oct 31
3
Asterisk and ARI (Aterisk Recording Interface) integration problem
Anybody knows why ARI gives this error message when I enter extension number
and password.
*Warning*:
file(/var/spool/asterisk/voicemail/default/222/INBOX/msg0000.txt): failed to
open stream: Permission denied in *
/var/www/html/recordings/modules/voicemail.module* on line *525*
It doesn't show the voicemails, although it shows that there is 1 or 2
voicemails in the INBOX.
--
Zeeshan A
2006 Dec 03
11
Is there any Asterisk controllable thermostat?
I am wondering if there is any such thermostat available which can be
controlled from Asterisk. Like you call your home pbx, dial some extension,
e.g. 333 and it asks to set the temperature, you enter a temperature, and it
sets the thermostat to that temperature. This thermostat will be very
useful, e.g. when you're coming back home after a few days and now its
snowing and you want home to be
2010 Aug 21
7
Opensource Speech recognition for Asterisk
Hi Everyone,
Has anyone got any opensource speech recognition software to work with
Asterisk? Please only list WORKING ones. Not the "theoretically" should work
ones!
Thanks
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100821/4d11d6c0/attachment.htm