similar to: Sending faxes with T.38 problem. Fax for Asterisk (no SpanDSP) - 1.6.1.1

Hello, I have Asterisk 1.6.1.12 with FAX For Asterisk Components: Applications: 1.6.1.5_1.1.6 Digium FAX Driver: 1.6.1.5_1.1.6 (optimized for core2_32) If I use call file with spool -------------------------------------------- Channel: SIP/IP/DEst No MaxRetries: 0 RetryTime: 10 WaitTime: 50 Application:SendFAX Data:/var/spool/asterisk/test.tif

Dears I installed digium fax and followed the instruction at http://downloads.digium.com/pub/telephony/fax/README,And as you can see above that t38 is loaded I am using a call file to send fax1.tif file as fax to the gateway named add The problem that Addpac send always Receive 488 Not acceptable here,and lkindly find my debug attached Please advice. Thanks I Advance shark*CLI>

Hi, im using a Asterisk Server which is not behind NAT. First i had problems with the fax detection. But this is now solved after adding a wait(2) at the correct place. But i'm still unable to receive a fax due to res_rtp_asterisk.c:3548 ast_rtp_read: RTP Read too short after the Fax session has started. My sip.conf includes [general] allowguest=no alwaysauthreject=yes sendrpid=rpid

Hi Guys, i am using the latest version of asterisk 1.4 (1.4.33.1), dahdi (2.3.0.1) and FFA (Applications: 1.4_1.2.0, Digium FAX Driver: 1.4_1.2.0). the issue i'm having is that i'm able to receive faxes from a website (that offer this service) but not able to receive from a regular fax machine (that is working perfect). [fax-rx] exten => receive,1,NoOp(**** FAX RECEIVE ****) exten

Hi all, I am running to the following problem, when using the below dialplan to receive fax, everything works perfect till this line exten => receive,n,ReceiveFAX(${FAXFILE}): and then the following line cannot be executed, it's like asterisk can't go back to dialplan and continue, the good news is when i check what is received in my fax folder i find that the file is a valid one (not

Hi all, I have problem for receiving fax from multiple page fax that sent from fax machine (analog). The error is : WARNING T.30 Page did not end cleanly This is my dialplan [inboundfax] exten => s,1,NoOp(**** FAX RECEIVED from ${CALLERID(num)} ${STRFTIME(${EPOCH},,%c)} ****) exten => s,n,Set(FAXOPT(ecm)=yes) exten =>

Hello users, Recently i have installed the free version of FaxForAsterisk and trying to work with it by sending a fax on T38. My version information is as follows i)Asterisk 1.6.0.20 ii)res_fax-1.6.0.14_1.1.6-x86_32 iii)res_fax_digium-1.6.0.14_1.1.6-i686_32 sip.conf [general] t38pt_udptl=yes extensions.conf [default] exten => _XXXXXXXXXX,1,NoOp(Fax Incoming Call) exten =>

I am having troubles with sending faxes. I hope someone can help me work out a better method. Basically we have a special address that our users can send to. It winds up on our Asterisk server which runs a Python script that parses the message for attachments and the phone number from the recipient address. The attachments are converted to TIFF and stored in a folder with various information

Hello, I need to send a tiff via fax with my asterisk 1.6.1.0. I tried in the dialplan [default] exten => _X.,1,SendFax(/root/test.tiff) but I have: salledeconf1*CLI> console dial 111 at default [Dec 23 16:24:22] WARNING[31739]: chan_oss.c:492 setformat: Unable to re-open DSP device /dev/dsp: No such file or directory -- Executing [111 at default:1]

We're having an issue where we call ReceiveFax in a context that includes a hangup extension and half the time dialplan execution doesn't continue after the fax is received successfully. Am I missing something simple here? Below is a sample call where this happened: The last log line for this channel/call is: [Feb 21 09:10:53] VERBOSE[13730] res_fax_digium.c: -- Channel

Hello, after I solved my problem with the fax processing after receiving, I got another problem while sending a fax: the header is not set properly. I use a PHP_Script to upload a PDF file and to generate a call file. A bash script is looking for existent call files in the web directory and moves them the asterisk's outgoing directory. Ok, my call file looks like this: ====== $cf_commands

I am testing out inbound faxing using res_fax and res_fax_spandsp.so My system answers the call but then sets there on the ReseiveFax line then comes back with an error that it exceeded the maximum retries. How would I go about debugging this? Below is my very simple dialplan code I am using, and the fax show version gives the following as well. FAX For Asterisk Components:

On Wed, Jun 24, 2015 at 08:15:06AM +0200, tux john wrote: > i would like to add email to fax functionality to the system. could someone > point me to the right direction to see how please? I don't have a general solution, since I haven't needed to send faxes recently. But I did set up my dialplan so that I could test that it works. I used this: ---- ;; For outgoing faxes

Just a thought regarding testing. Create a suitable TIFF file with more than 30 seconds worth of data and send it from Asterisk using SendFAX() to convince yourself whether Asterisk will work with your ITSP, you may still need to enable session timers. Have you considered setting up an extension on your Asterisk server which will receive the fax e.g. using ReceiveFAX() and see if your

I solved the issue by not answering the call as I assume others have done. -----Original Message----- From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Administrator TOOTAI Sent: Wednesday, February 18, 2015 12:50 PM To: asterisk-users at lists.digium.com Subject: Re: [asterisk-users] Res_fax - FAXOPT(faxdetect) Hello Le

Hello Le 17/02/2015 17:00, Administrator TOOTAI a ?crit : > Hi, > > as stated in the documentation, it's allowed to set > FAXOPT(faxdetect)=yes/no to allow fax detection. > > It's done (see below) but still fax detection :-( Extension 300 is > hylafax with iaxmodem. > > On the upper Asterisk gw it's the same, despite the faxdetect set to no > we also

Hello List, I have been trying to setup T38 gatewaying with the following setup SIP ->Asterisk -> DAHDI TE410P with Libss7 -> TELCO I'm using asterisk Asterisk 1.8.3.2 and DAHDI Version: SVN-trunk-r9697M Echo Canceller: HWEC I'm aware there's no support for T38 gateway but I have been trying to get the patches https://issues.asterisk.org/view.php?id=13405 to work. It seems

Hello. I've been trying to setup Free Fax for Asterisk on a Debian machine with Asterisk 1.8. I have managed to register and installed the Digium modules. Sending and receiving through it have resulted in failure. The output of fax show capabilities is: Registered FAX Technology Modules: Type : DIGIUM Description : Digium FAX Driver Capabilities : SEND

On 11/12/2014 4:52 PM, Recursive wrote: > Hello, > > at first, thanks for helping! > > In the meantime, I have done a lot of research and trial and error, and I could solve that specific problem. Obviously, the dialplan application "Answer" was playing a key role here. My original dialplan snippet (which produced that problem) was: > You may very well find getting T.38