similar to: DEVICE_STATE() and Asterisk 1.6.0.10

Hi all! I am trying to figure out how DEVICE_STATE is working, no luck so far. sip.conf [0317998975] type=friend regexten=0317998975 secret=???? username=0317998975 callerid="Magnus Benngard" mailbox=0317998975 at inputinterior.se host=dynamic canreinvite=yes dtmfmode=rfc2833 nat=yes disallow=all allow=alaw extensions.conf exten => 0317998975,hint,SIP/0317998975 exten =>

Is there a way skip / ignore the member whose status is busy in the Queue. I have two channel member in queue and i have set the peer limit 2 for these members. I want to skip those member who are currently on the call (answered to calls) and now their status is busy, if Queue see the busy status caller will not enter in the Queue and go to the next priority. [test-queue] strategy = rrmemory

Hi list, I need your help ,I have an incoming call x the ivr and the operator takes the call. ext "101" , If a second call reenters and the operator is talking, I want to send to the extension 102 I use the Variable DIALSTATUS , but not working check IVR [IVRINMA] exten => s,1,Wait(1) exten => s,n,Set(CHANNEL(language)=es) same=> n,Set(TIMEOUT(digit)=4) same=>

On Tue, Nov 25, 2014 at 8:14 AM, Matthew Jordan <mjordan at digium.com> wrote: > On Mon, Nov 24, 2014 at 2:12 PM, James Lamanna <jlamanna at gmail.com> wrote: > > Also, how big does the cache in frame.c grow to? > > I've recompiled with MALLOC_DEBUG on that server: > > > > asterisk -rx "memory show summary" > > > > .... > >

Hi Is there any way to set the presence state of a peer to in-use in asterisk 1.8? The idea is to integrate DND buttons on phones to BLF. Regards -- Ishfaq Malik Department: VOIP Support Company: Packnet Limited t: +44 (0)161 660 2350 f: +44 (0)161 660 9825 e: ish at pack-net.co.uk w: http://www.pack-net.co.uk Registered Address: PACKNET LIMITED, Duplex 2, Ducie House 37 Ducie Street

Hi and happy new year! My question: - two extensions: 1111 and 2222 - an active call on 1111 - incoming calls to 1111 should be forwarded to 1111 (call advice!) and 2222 I know how can I forward an incoming call to more than an extension, but I have no idea how can I get the information, that 1111 has already an active call... I think, I need something like: exten =>

Hi! Trying to figure out what I am doing wrong... 1 std SIP phone (0317998975) registered to an Asterisk (SVN-trunk-r234256) 1 Cell phone 00733025975 attached through H323. extensions.conf exten => 975,1,Goto(975-${DEVICE_STATE(SIP/0317998975)},1) exten => 975-INUSE,1,VoiceMail(0317998975 at inputinterior.se,bs) exten => 975-INUSE,2,Hangup() exten =>

Also, how big does the cache in frame.c grow to? I've recompiled with MALLOC_DEBUG on that server: asterisk -rx "memory show summary" .... 1780466242 bytes (1780181594 cache) in 2352909 allocations in file frame.c ... Seems like a ridiculous cache. On Mon, Nov 24, 2014 at 9:02 AM, James Lamanna <jlamanna at gmail.com> wrote: > cat /proc/cpuinfo lists 4 cores. >

Hi, Here http://www.voip-info.org/wiki/view/Asterisk+func+device_State you can find a link to download a backported for Asterisk 1.4 version of DEVICE_STATE function. (Elsewhere, you can find reference to another backported function DEVSTATE which seems to behave the same as DEVICE_STATE). As I would like to prepare as much as possible, my dialplan to 1.6 and beyond, I would prefer to use

Hi all, How can I implement a full-featured Call-Waiting behavior on the Asterisk level (e.g. I don't want to relay on end-equipment capabilities)? I found it very strange that such a basic feature is not built-in in Asterisk (and I've googled a lot in search for this). Here is what I need: SomeuserX is calling MyUserA. They are on conversation (assumption: voice is via the Asterisk)

Arch = x86_64 OS = CentOS-6.4 (freepbx) Asterisk = 11.4.0 FreePBX = 2.11.0.2 Snom870 Handsets We are in the process of moving to an Asterisk based PBX. At the moment most things work as we wish. However, I have just notices that when I force a reload using 'amportal a reload' I see this loop start in 'asterisk -rvvvvvvvvvv': > Channel Local/s at tc-maint-000002a4;1

Has anyone here ever tried using a wifi bridge to place a deskset in someplace where there was no LAN drop? If so what hardware did you use and was it succesful? Michael -- Michael Graves mgraves@pixelpower.com Sr. Product Specialist www.pixelpower.com Pixel Power Inc. mgraves@mstvp.com o713-861-4005

I have an Asterisk 1.6.0.28 system, with a queue called 'marketing'. Everything appears normal, but the status of the members never changes from 'not in use', even if they are being rang or are in a call. Members are added like so: queue add member SIP/1406 to marketing penalty 0 as SIP/1406 state_interface SIP/1406 And they are present as a hint: exten =>

http://www.loligo.com/asterisk/misc/Presentations/Asterisk-features-20040106.xls I had been asked a while ago to put together a short Excel spreadsheet listing many of the "common" features of Asterisk as compared to a typical PBX. Many PBX vendors supply an exhaustive list of their features, and I figured I'd take as many of the unique features as others had offered, and put

Hi I need to set the number of incoming calls to one, but the outgoing calls should be unlimited. I think the busylevel parameter is for it(incoming calls), but not works. My config is: cat sip.conf [general] [template](!) qualify=yes cc_agent_policy=generic cc_monitor_policy=generic call-limit=2 busylevel=1 callcounter=yes subscribecontext = hint allowsubscribe=yes [100](template)

Hello, is there some way to make Asterisk light up a certain light on an IP-phone ? Like MWI, the message waiting indicator can light up if there is voicemail. Could this light, or even other lights (like BLF-buttons) be used to give a visual notification to the user ? For example : if a certain value is set in the Mysql-DB and Asterisk reads out this value, can Asterisk react upon it inside

First off this is not my work for extensions.conf it is modified from http://leifmadsen.wordpress.com/2009/07/15/migrating-from-agentcallbackl ogin-to-standard-dialplan-methods-part-1/ So credit to Leif Madsen <http://www.leifmadsen.com> But as to my question [AgentLogin] ;A replaced version of AgentCallbackLogin() using a GoSub() ; exten =>

Hi everybody Did anybody by any chance ever work out how to log in and out agents on Asterisk 6+? I used to have it working perfect in Asterisk 1.2 but since I upgraded to 6 the agent login functions are gone and the readme file that came with it made no sense to me. I noticed somebody on the net posted that they had the same problem but used Voicemail to authenticate users, but that seemed a

I have a client who is looking at replacing their PBX, and I'm interested in putting together an Asterisk solution for them. One feature that would really, really get their attention is if I could do the "Vonage" thing, where if a PSTN caller dials a direct extension (coming in over PRI) both the user's deskset _and_ an external number (their cell phone) would ring, with

Hello, I think Device State for Agents don't work correctly My configuration: agents.conf [general] [agent](!) autologoff=15 ackcall=no acceptdtmf=# wrapuptime=5000 musiconhold=default recordagentcalls=no custom_beep=beep [2000](agent) fullname=Fulano [2001](agent) fullname=Zutano [2002](agent) fullname=Mengano queue.conf (Agents Related) member => Agent/2000 member =>