similar to: Extension status as XML for an Aastra 57i

I'm new to Asterisk and inherited this project so I apologize if this question has been asked a hundred time before. I did start with Google but I may not be asking the right questions, because I wasn't finding any answers. I have Asterisk 1.4.24 and FreePBX 2.5 running and using a Digium TDM800P to interface with our six analog phone lines from the telco. Currently I have a single trunk

Hello All, I have a need for a wireless solution and have been looking at the Aastra 57i CT phone that have the wireless handset with them. Aastra says they will cover "up to 300,000 square feet". I am finding this hard to accept. I was also wondering about the "secure WDCT cordless technology" Could this be a form of DECT? Any one using these that can shed some lite?

I recently tried to update my Aastra 57i to version 3.2 and ran into a problem. It won't properly register and says "contact mismatch". I added "sip contact matching: 2" to aastra.cfg, but that didn't help. When I look at the SIP trace, but I see is the Aastra sending a REGISTER and Asterisk replying with the 401. The phone then sends the REGISTER again, this time

I'm not sure if this is part of Asterisk or FreePBX so I apologize if this is the wrong list to ask my question. As part of my companies call routes, I have a Time Condition for our tech support queue. I would like to add a Day/Night Control so the Time Condition can be overruled. However, I'm afraid someone will forget to turn it off again. What is the best way of resetting this control

Hi, I'm currently trying to connect an Aastra 57i to our Asterisk Server. The strange thing is, that altough I have definitely entered the correct IP address of the server, the phone doesn't even attempt to register. Here is the configuration file (local.cfg) of the phone: firmware md5: dee6e938b469e217a87138076f47fe41 boot count: 1 tone set: Germany language 1: German time server1:

I am currently testing a 57i unit. No problems configuring the phone's config via phone/web UI. We are trying to avoid using the web UI, the reason is it will take a long time typing the softkey xml applications URIs on each phone, so we chose TFTP. Tried configuring the phone via a TFTP config server, but no changes took effect. I wonder why it doesn't work with TFTP even if I was able

Hi, Has anyone had experience with the Aastra 57i / 57i CT phones? The problem I'm having is that the phone isn't re-registering itself with the Asterisk server. As a result, the phone loses the registration with the server and is no longer able to receive incoming calls. Outgoing calls work fine. Right now, I have the following sip registration settings: sip registration period: 180

Sorry for being a little off topic, but I'mconsidering a few new phones for my Asterisk installation. I have a mix of Polycom 500/600s and an Aastra 480i CT. I'm considering adding a couple of Aastra 57i or 57i CT. Does anyone here have experience with the 480i CT and the newer 57i CT? I'm curious as to the real differences. Thanks, Michael Graves Sr Product Specialist Pixel Power

I have a 536i expansion module attached to a 57i-CT. The BLF lights on the 536i will light up and work fine for a while... however after a bit they seem to loose their ability to see if someone is on a phone. They still work to dial, if I try to dial, however, they don't light up when someone makes a call, or if their phone rings. If I reboot the phone, the lights start working again

Upgraded from 16.2.14 to 1.6.2.15 on Fedora 13, with aastra 9133i and 57i. On 9133i and 57i: #<extension># works for a blind transfer. Xfer<extension>Xfer doesn't! All this worked on 1.6.2.14. Nothing useful on cli, verbose 3, DEBUG. Here extension 169 answers an outside call, and tries to transfer it to 145 using the Xfer button: -- SIP/169-0000009c answered

We are installing Aastra phones (480's and 57i's) into a fairly simple asterisk setup. Although call park & pickup work fine using xfer to 700 (to park), dial 701 (to pickup), we are unable to make the park/pickup softkey feature work on the aastra's. Although we've programmed the softkeys per the manuals, they seem to have no effect (just dead). For example, our 57i is

Hi. Does anyone have a patch or workaround for the 50 BLF limit of Aastra phones? I have a couple 57i with the 560M console and only the first 50 BLF lines get registered. I am using the latest firmware from Aastra but I read that this limit was imposed because of a memory leak. Obviously my customer is complaining about these last 10 lines not showing their status. -- Telecomunicaciones

Quoth: OCG Technical Support <support at ocg.ca> > >Although we've programmed the softkeys per the manuals, they seem to have no >effect (just dead). For example, our 57i is setup like this: I had similar problems and ended up using the speeddial inband functionality. FWIW, my 57i's setup like so: softkey4 type: speeddial softkey4 label: "*Park" softkey4

Hi, We have a few Aastra 480ci phones and we've noticed that in order to get the phone to receive a call, qualify must be = no. Apparently the Aastras do not respond to the qualify message (or respond in a way Asterisk doesn't understand) and Asterisk thinks the phone is unreachable. However, this now prevents MWI from working properly on the phones. Does anyone know how to get MWI

Hi, I'm a Polycom user who have just been trying out the Aastra phones. I`ve run into a bit of an issue. I cannot configure the voicemail dialout correctly on one of the two phones I am using, even if the documentation seems to state that it should work in the same manner on both phones. I have both a 9143i and a 57i CT. I`ve set both up with provisioning from config files. Both

Hello all, Our setup consists of an asterisk server (version 1.4.8 ) with a TDM400 card (4 FXO ports) and about 10 aastra 5Xi phones (2 phones are 57i and the rest 55i). The asterisk server is also configured with two SIP trunks. The problem that we're having is that if at any time there is an internet connection interruption to the asterisk server all the aastra phones freeze. If we disable

Hi, I have 2 phones AASTRA 57i with Asterisk 1.6. When the internet connection for some reason fall down the 2 phones go to "NO SERVICE", searching on internet i found that this is due to DNS service. Has someone solve this problem? or suggestions? Thanks in advance Antonio Supera i limiti: raddoppia la velocit? da 10 a 20 Mega! Risparmia con Tutto Incluso: telefono + adsl 20

I have a Asterisk server (PBX in a Flash) with Aastra 57i phones. When there is an incoming call the phone will display two buttons "answer" and "ignore". If you press "ignore" the call is dropped instead of sent to voice mail. The following is the log: -- Called 111 -- SIP/111-00001c14 is ringing -- Got SIP response 486 "Busy Here" back from

Hi Everyone, I can connect the Jabra GN2124 + GN2100 (smart cord) to the Aastra 53i receiver port and I get a tone. But when I connect it to the headset port there is no tone. I am running firmware 2.4 and I can't seem to find that DHSG, EHS or whatever the setting maybe called to enable to get this headset work with the phone. Can anyone quickly tell me where the audio options are on this

Hi Everyone, I am running DD-WRT on a router that feeds about 30 Aastra 6753i. The phones occasionally go into "No Service" mode. The POE switch doesn't seem to be the problem as it's tested fine. I think the router sometimes gives up and comes back quickly. Or something of that nature. However, the connections are maintained if a call is going on because there are peer to peer