similar to: Outgoing CallerID for KPN in Belgium

Hello all, Recently I purchased an QuadBRI card from junghanns.net after some playing around, reconfiguring dialplans etc with the exception of 1 thing everything seems to work: I seem to be unable to set the outbound callerid. The dutch telecom operator (KPN) provided me with 4 MSN's on 1 BRI interface. In the past years I'm more then used to setting the MSN without the leading 0, this

Hi list, Hopefully, some of our Dutch members can help with this one. I'm also based in the Netherlands and am using a Sipura (Linksys) SPA-3000 (firmware v3.1.10(GWd)) as a PSTN to VoIP gateway for my Asterisk test system. It works fine, except that the Called ID (CID) is not working. I'm aware that KPN (our local telco) requires a separate subscription to activate CID on POTS

Hi list! I am installing an * box that will be installed on a site with KPN BRI ISDN in The Netherlands. I am using bristuff fron Junghanns. Does anybody know the correct settings for this? I will not have internet access there which makes it harder to google around on location. switchtype = euroisdn is pretty obvious but what about these settings: signalling = bri_cpe_ptmp ; p2p TE mode

Hi there! I've used Wine a couple of years ago when I used Ubuntu as OS. Nowadays I have a Mac and recently installed Wine on it. My question is, how do I fix so that I don't have to use the terminal to start an .exe program? Just enter a script in Applescript, save it as an application and start it through that? I've googled and found some scripts but none of them works for me.

Hi list, I have a server running a simple hfs isdn card running with chan_misdn. the problem is, I can't get asterisk to pick up the phone, outgoing calls work fine. when running asterisk with -vvvvvvvvvvvc I get the following "log" when I try to dial the isdn server. P[ 1] * Starting Ast ctx:kpn-in dad:0594643637 oad:0878722291 with 's' extension P[ 1] MGMT: SSTATUS:

Hi to all, I have a question about the callerid (msn number) off calls comming FROM a queue. This is my setup: - ISDN using zap (zaphfc) - Incomming calls arrive in a queue - One of the members of the queue is my cell phone... member => Zap/g1/XXX73XX19 (X to protect my privacy ;-)) The problem is the call from the queue to my cell phone. In a dailplan i can set the outgoing msn using

I am feeling my way in the use of GLM's and have come across a warning whilst manually simplifying a model with interaction terms, removing terms one at a time from the maximum model (R1.9.0). > model<-glm(midpnts~(AET+tempave+tempvar+MDE+sqrtarea)^2+Lat,family=poisson,weights=weightS) > model2<-update(model,~.-tempave:tempvar) Warning message: fitted rates numerically 0

Hello, I would like to put 1 asterisk box in Country A and 1 asterisk box in Country B. Let's assume : - Asterisk box in country A = GWA - Asterisk box in country B = GWB - Calling party number (located in country A) = CgPNA - Called party number (located in country B) = CdPNB - Second Called party number (located in country B) = sCdPNB - PSTN in country A = PSTNA - PSTN in country B = PSTNB

Hello, Does anyone know how to set the outgoing CallerID properly when using Snom200/SIP/CAPI/BRI? Following doesn?t work: exten => _0.,1,SetCallerID,526910 exten => _0.,2,Dial,CAPI/526980:${EXTEN:1} Asterisk writes: *CLI> -- Executing SetCallerID("SIP/226-ada0", "526910") in new stack -- Executing Dial("SIP/226-ada0",

I have a problem with Asterisk-bristuffed using a zaphfc card. I am located in the Netherlands, so I have an ISDN line from KPN. When I start Asterisk, and plug in the ISDN line, everything works perfectly for about 5 minutes. And then the ISDN line is down for 1 minute, and after that minute, the line comes back up and works for another 5 minutes. Every time the line goes down I get the error

Yo all, I have a problem with a Dutch (KPN) PSTN-line, connected to an X100P. The call wil sound OK at first, but after 10-20 minutes, the audio will start to crackle. Soon after that, this crackle turns into a continuous noise and the parties won't be able to hear eachother anymore. It also sometimes happens that the party on the TDM400P hears a very loud, short-delay echo of themselves,

Hi All ... I'm running Asterisk 1.2.13-BRIstuffed-0.3.0-PRE-1v which has a Junghanns QuadBri card in it (lspci reports Cologne Chip Designs GmbH ISDN network Controller [HFC-4S] (rev 01)) I have a regular KPN ISDN2 Line connected which works fine with the the zapata.conf below. However, I also have a new KPN ISDN Mutli (meervoudig) line (PBAX-Group), which works fine for incoming calls,

Hey all, I recently noticed that DTMF caller-ID was implemented in CVS, so I requested the service from my telco (the Dutch KPN) and tried to get it going in Asterisk (current CVS), without success so far. This system has 1 X100P, 2 TDM400P's with 4 FXS-modules each and 2 HFC-PCI ISDN-cards (zaphfc-driver) in it. The analog line I'm trying to get caller-ID working on is obviously on the

Hi *, now for a long time i am trying to set the outgoing callerid, without luck. I am here in Germany, my asterisk has a pri interface connected to a PMX installed by Telekom. All telephone calls are preselected to EcoVoice. I am using asterisk 1.2.7.1, zaptel 1.2.5 and libpri 1.2.2. A week ago we tried with a device able to simulate a telephone system so send out a callerid, and that

On Tue, Jan 09, 2018 at 06:53:51PM +0000, Kaylor, Andrew via cfe-dev wrote: > I think we're going to need to create a new mechanism to communicate > strict FP modes to the backend. I think we need to avoid doing anything > that will require re-inventing or duplicating all of the pattern > matching that goes on in instruction selection (which is the reason >

>The standard argument against trying to introduce "scope-like" mechanisms to LLVM IR is inlining; >unless you're going to prevent functions that use stricter/laxer FP rules from being inlined >into >each other (which sounds disastrous), you're going to need to communicate strictness on an >instruction-by-instruction basis. If the backend wants to handle that by

On 01/08/2018 07:06 PM, Richard Smith via llvm-dev wrote: > On 8 January 2018 at 11:15, Kaylor, Andrew via llvm-dev > <llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org>> wrote: > > Hi Kevin, > > Thanks for reaching out about this, and thanks especially for > offering to help. I've had some other priorities that have > prevented

The only way I could get rid of the err for gsm on launch was to copy libgsm to my DDO folder, even those I use DYLD_FALLBACK_LIBRARY_PATH, and libgsm is in all of those locations. Here's my launching script&#058; Code: on run --edit this to be the correct location and file to run (typically only edit after the "drive_c") set toRun to

On 8 January 2018 at 11:15, Kaylor, Andrew via llvm-dev < llvm-dev at lists.llvm.org> wrote: > Hi Kevin, > > Thanks for reaching out about this, and thanks especially for offering to > help. I've had some other priorities that have prevented me from making > progress on this recently. > > As far as I know, there is no support at all in clang for handling the >

Do we have a test that exercises ISD::FP_ROUND_INREG in SelectionDAGLegalize::ExpandNode()? I ask because I'm working on code that reuses that block in the switch and I'm trying to write a test. But I'm having trouble and would like to see what a working test for the existing code looks like. A quick grep of the tree doesn't show anything. Ideas? -- Kevin P. Neal