similar to: Configuring Deltacom pri in Florida

> Maybe there isn't a glibc version (although > it shouldn't be hard to port the Solaris version to >glibc). I will try to port nss_wins to glibc. I made some changes to smb.conf and follow the tests described in Samba diagnosis (www.samba.org/samba/docs/diagnosis.html) smb.conf [global] workgroup = NETMANAGER server string = Deltacom Samba Server printcap name =

Are you looking for local or Long distance? What will these T1s primarily be used for(inbound/outbound, domestic, local, long distance, international) How important are per minute rates to you? how many minutes do you expect to use per month? We are in Tampa Florida and have 15 T1s from several different providers so I may be able to refer you to one if it's a match to what you're

Another question, Is anybody using the Tellabs 2572 EC with a PRI. When we moved from our analog lines to a PRI, I thought it would be simple stuff moving the EC to the PRI. Changed signaling, made sure that channel 24 wasn't being ECd and everything came up. But, I was getting complaints of random echo on the PRI. Local echo. Also, we weren?t able to do any kind of modem dial-outs (Adit

Hey Everyone, I would like to start testing/playing with PRI channels but I don't have access to a PRI line. Is it possible to do the equivilent of a crossover between two PRI Cards (say Digium's TE120P)? What I was thinking is that I could set one asterisk box up with a PRI card set as the TE and provide clocking and another box exactly the same but with the card setup as NT. I think

hi, I'm trying to configure my newly acquired TE410P card to work as 4 E1 spans. This is supposed to be a drop-in replacement to the earlier E100P card. However, on loading the zaptel module it gets configured as T1 spans basically doing a 'cat' on /proc/zaptel/1 thru 4, it shows 24 channels per span. After this ztcfg fails saying 'ZT_CHANCONFIG failed for channel 97'.

Hello, We have an asterisk setup at our client's site using a TE205P. The line to telco is a 23 channels T1 PRI, however the line has random echo problems (about 5-10% of the calls)! Can anybody tell me if echo cancellation is really needed even at a T1 PRI to the telco? Because people keep saying when they deploy voip solution in Hong Kong using T1 PRI, there is no need of echo cancellation.

I'm ordering a PRI T1 for use with Asterisk and a Digium Wildcard TE405P. The provider is asking me a number of questions about how I want to configure the line. Here goes: 1. Dial Tone - No, Yes - Precise, Yes - SCC 2. Framing - SF, ESF 3. Line Coding - AMI, B8ZS 4. Signaling Type - Ground Start, E&M, Loop Start w/Ring, Loop Start w/o Ring 5. Pulse Mode - DTMF, MF 6. Outpulse Start -

I'll keep asking weird questions here: I have two T1 WAN circuits originating at my asterisk box and terminating at Asterisk servers at remote sites. Currently I use zaptel ppp assigned to all 24 channels for data. Now I would like to split off a few of these channels for voice trunks (I should use VOIP, but at the moment I do not have fast enough servers for the codecs) At one site

Hi guys, Can I use a Sangoma a101 to interface a legacy pbx to an Asterisk server? The pbx doesn't have sip and I want to come in off of a sip trunk and interface with the older system. I know I can use a pri card to hook in to the phone network, but can I use this same card to feed back the signaling as if I were the phone company to the older system? Thanks, Tom

SYNOPSIS Erratic red alarm T1 PRI on asterisk, but zttool running concurrently during alarm shows no errors, irq misses, or alarms, on any span. Using asterisk and quad Digium T405P, configured as follows: Span 1 connects to ISDN PRI (fractional 8 B channels, D channel 24). Span 2 connects to T1 Mux and analog stations. Span 3 connects to ISDN PRI Nortel BCM hybrid key system digital trunk.

Hi, I have a client that has a 24 channel voice T1 that I have been using e&m signalling over for a number of years. The local telco finally got an ISDN switch and wants to move them to PRI. I didn't see this as a big problem - I've done a few others on this particular Caribbean island without issues, but this would be the first time with a Xorcom unit involved. We tried to do

Maintainer: Express Line Date opened: January 17, 2006 Status: Open Value of bounty: $5000.00 Licensing for code: We retain intellectual rights to the underlying source code. We need Asterisk (stable version) to be able to perform a 2B channel transfer for a NI2 B8ZS PRI line. We can't use a channelized T1 at the time for our work. This feature is commonly called a call transfer on analog

I'm trying to get a Qwest PRI configured and working with my lab Asterisk server. They said that the switchtype is 5ess and the signaling is pri_cpe. My entries into zaptel.conf are: span=1,0,0,esf,b8zs bchan=1-23 dchan=24 loadzone = us defaultzone=us channels=1-23 And my entries in zapata.conf are: language=en context=telco-incoming switchtype=5ess signalling=pri_cpe

Hello All, I was wondering. What are the primary advantages to using a PRI over a T1? As I understand it, the PRI terminates very fast, meaning you can do immediate answer and dial... This is very handy on the BRI line I have on the asterisk. Can T1 signalling also do immediate answer, or does it just behave like a channelized pots line and ring as usual? I am trying to determine if I should

Ok, I'm about to take the plunge, and am trying to decide between Channelized T1 E&M and PRI. I'm getting an "Integrated T1" which will have data and voice capability, all plugged directly into my digium single T1 card. In either case the data piece looks pretty straighforward, just setup the channel properly, hand it off to the linux hdlc layer, and route away.... the

UPDATE. The circuit has run clean since the 7th. It seems the telco found a problem after all but they can't tell me what they did... cause they think it was fixed as part of another case. Grrr. Well, I never doubted the T400P too much but I went ahead and bought a different card just in case. Haven't had to use it so far. One of the biggest reasons I did not think the Wildcard was at

I am trying to connect two machines to each other with an T1 crossover cable. The first machine has two TE120P cards - one connecting to the telco on an ISDN PRI. The second to a crossover T1 cable to a second machine which has one TE120P card. Telco <-cA-> Machine1 <-cB-> Machine2 Machine1: Two TE120P cards Machine2: One TE120P card cA: Standard T1 Cable cB: Crossover T1

I have TE405P span connected to a patton/digi 2977 T1/PRI port. Zaptel starts up fine without any errors. Libpri is installed as well. But I get the following when trying to load asterisk ------- Jul 3 19:30:26 ERROR[8192]: Signalling requested is PRI Signalling but line is in Unknown signalling 896 signalling Jul 3 19:30:26 ERROR[8192]: Unable to register channel '25-48' Jul

Could anyone with any experience with * over a non-PRI T1 help this newbie? I have a fractional T1 that is working fine through a channel bank, but I can't get any response on * using a T400P. My analog line and the extensions work fine, but the T400P port 1 shows a red led (what exactly does that tell me?). I brought up zttool which shows a condition red also, but ztcfg shows nothing amiss.

Hi list. I've googled around for this, and so far have come up short. I'm attempting to set the outbound callerid when making a call using our PRI. I've talked with ATT (the providor) and they have said the screening table has been disabled, so anything my phone system sends for callerid should be passing along. However, when I make a call, the primary number assigned on our PRI is