similar to: newbie questions

Hi - I just got a Sangoma A200 card with a single 2FXO module and what appears to be an empty module. I put the card in my Dell GX260, but the power light on the front of the box just blinks and won't power up. I did take the power cable from the CDROM to put on the card - I don't need the CDROM right now.. I'm looking for direction in getting this card working - I currently

List users, Did anyone else recently receive spam from DIDForSale with the subject "DIDForSale 2012 achievements"? I suspect that they are using this list to harvest email addresses and think they should be called out on this poor business practice if that is the case. Regards, Matthew Roth InterMedia Marketing Solutions Software Engineer and Systems Developer

git://git.zytor.com/users/genec/syslinux.git Branch memdiskdbg-for-sha0 This starts with adding another check in two of the disk probes (by Shao; Thank you), expands the debug output, adds an additional check in the third probe and expands/reorders the debug output. At this time, it appears to resolve the MEMDISK issues that Jason Vasquez first noticed. The additional check in the third probe

Hi, I've been trying to debug RH 9 CD install problems on Dell GX260 line. The floppy installs are working just fine but CD install misteriously freezes before even getting at the prompt and booting the kernel. No messages, on contrary - screen goes black very quickly and I can just see for a split second something was there. I have just rebuilt install images with syslinux 2.04 and

Job Description: Asterisk MySQL Support Engineer Fast Growing Global Telecoms Company requires a very experienced engineer who has a variety of skill levels. The role would suit someone who has worked at switch level and fully understands how calls are to be handled to and from a VoIP platform, using a MySQL data base. Must be able to understand and had experience in dealing with, CLI, PDD, ACD

Hi, I am using asterisk 1.4.18. I am using it for inbound only call center. The SIP phones are X-Lite. Right now when a call is proxied by Asterisk to X-Lite the agent only sees asterisk written on its CLI screen. I want the agents to be able to view the callees number. Is there any way to make this happen. Regards Syed Nasruddin -------------- next part -------------- An HTML

This is a test, please disregard -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050111/3b3612cb/attachment.htm

+1 or bad capacitors, look on the board and make sure none are leaking or puffed out. On Jan 4, 2016 6:08 PM, "David Both" <dboth at millennium-technology.com> wrote: > Power supply > > On 01/04/2016 07:03 PM, tdukes at palmettoshopper.com wrote: > >> Hello, >> >> I have an old IBM Netvista. Lately, it would seem to go into sleep mode >> but I

There's a rather old bug report in Debian's bug tracking system (see http://bugs.debian.org/27126) about wanting to be able to specify the maximum file size, as well as the minimum file size. Here's the text: Sometimes, it's useful to specify a file size range one is interested in. For example, I'd like to keep an up-to-date mirror of Debian, but I currently

I just installed an Asterisknow server can someone suggest a software to be used for a PC - PC voice comunication to test in easy way the functionalities of my server. Thanks in advance for the help -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20091027/bb5e7b1a/attachment.htm

Thanks Mehdi. My pass clones the functions within a module in order to have the original function and an exact copy of the same function but with a different name, i.e. sum() and sum_parallel(). After my pass I will run ThreadSanitizer instrumentation pass only on the new copy of the functions, i.e. only the “_parallel” functions will be instrumented by tsan. In some programs that I am

Hello all Asterisk Users, This is my first post here. We are in a process of moving Dialogic 240/JCT-T1 from old voicemail server to Asterisk box. Which card drivers do we need? Please share experience if anyone have successfully configured Dialogic JCT-T1 card with asterisk? Only source proves that this card work with * http://lists.digium.com/pipermail/asterisk-dev/2003-April/000244.html

We are in the process of preparing to move our Asterisk server to a Digital T1 interface card instead of a analog card (via an Adtran which is now connected to the T1). I did a preliminary test the other day and hooked the T1 line up to the T1 card, bypassing the Adtran. This worked rather well I must say. The two issues I ran into are: 1) Caller ID is not working even though I enabled

Hi, could anybody explain what GlobalValue::AvailableExternallyLinkage means? I implemented an instrumentation pass that creates a clone of a function. For some programs I noticed that also function such as “atoi”, “atof”, “__strspn_c2”, etc. they get cloned even if I am not implementing them in the module. I would like to avoid cloning those functions, so I noticed that they have

Dear all, Anyone of you knows how to play an audio file at the beginning of a call for both Caller and Callee? A(x) of Dial application only plays audio for callee. I don't want to use MeetMe because I want to use Monitor and MixMonitor. Thank you! ________________________________ Este mensaje se dirige exclusivamente a su destinatario. Puede consultar nuestra pol?tica de env?o y recepci?n

I know there are a few 3Ware fans here and I was hoping to find some help. I just built a new server using a 3Ware 9550SX-4LP with four disks in raid 5. The array is fully initialized but I'm not getting the write performance I was hoping for -- only 40 to 45MB/Sec. 3Ware's site advertises 300MB/Sec writes using 8 disks on the PCI Express version of this card (the 9580 I think.)

Because what is happening is that if function “atoi” gets cloned I don’t have a definition of “atoi_parallel” therefore I get undefined references when linking. I just want to clone and instrument functions implemented in modules of my program. > On Nov 19, 2016, at 13:54, Mehdi Amini <mehdi.amini at apple.com> wrote: > > >> On Nov 19, 2016, at 12:44 PM, Simone Atzeni

We are running asteriskNow 1.4.18 and after a few days it becomes unresponsive and inbound INVITEs timeout. We just reboot the box to resolve it. But it seems to be occurring more regularly now. I am hesitant to move to latest version, but will do if needed. Any guidance or troubleshooting modes I may use will be helpful. -------------- next part -------------- An HTML attachment was

> > On Nov 19, 2016, at 14:09, Mehdi Amini <mehdi.amini at apple.com> wrote: > > I assume from your description that you are also updating call sites in the same module so that if foo was calling atoi, after cloning you have foo_parallel that is calling atoi_parallel? > If this is the issue, it depends, I’d probably consider turning the available_externally into internal.

Hello, This is what "Writing R extensions" currently says about R_atof and R_strtod: >> Function: void R_atof (const char* str) >> Function: void R_strtod (const char* str, char ** end) >> >> Implementations of the C99/POSIX functions atof and strtod which >> guarantee platform-dependent behaviour, including always using the >> period as the decimal