similar to: Cisco 7941G & Auth

Hello, I have been running SIP41.8-2-2SR4S firmware on the Cisco 7961 and have recently upgraded to SIP41.8-3-2SR1S to add the DND button on the front of the phone and also to hopefully resolve some issues with the phones not registering after a long period. Once we upgraded the phones now display "Error Verifying Config Info" in the Status messages and will not process the

Hi, My apologies for the OT. My googling came up empty and hopefully there are some members in the community that could give me a hint how to solve this issue: Cisco 7961 with SIP firmware 8.3.3. Needed to downgrade it to 8.0.4SRS2. The downgrade process started off good. The 7961 got it's IP address via DHCP, found it's SEP<mac>.cnf.xml file and started to "upgrade"

As part of a project to move a clients Cisco phones to SIP to work with an Avaya system, I'm taking a Cisco 7961 we bought and adding it to our Asterisk setup. Now, I've gotten the firmware files from the site, the latest version is 8.4 which contains the following files: apps41.8-4-3-16.sbn cnu41.8-4-3-16.sbn cvm41sip.8-4-3-16.sbn dsp41.8-4-3-16.sbn jar41sip.8-4-3-16.sbn

Hi All; Again, the Cisco IP Phones 7942G and using Skinny: I upgraded the firmware to version 8.5 (skinny) and I am using skinny channel (chan_skinny) and the skinny.conf file. The phones are registering, but when we use them to place a call, we only hear tooooooooooo in the handset and we do not hear voice (even when we dial the digits, we only hear toooooooo .. but it dials and destination

Hi! I did manage to load phone with SIP image : SIP70.8-0-3S, made SEP-MAC.cnf.xml, but phone never read the configuration from it. On the screen it's written "Unprovisioned", and phone is not trying to register with asterisk. Please help!! MihaelaMJ -------------- next part -------------- An HTML attachment was scrubbed... URL:

Oh god it works ! to switch cisco to upd I used config: <transportLayerProtocol>2</transportLayerProtocol> with udp it works well, thanks for your help :) > On 24 Feb 2015, at 17:02, Joshua Colp <jcolp at digium.com> wrote: > > If you use UDP with force_rport=no it'll work. > If you use TCP then set rewrite_contact=yes so it'll reuse the established TCP

Hay guys, got trouble with registration with cisco 7975 Here is the debug : <--- Received SIP request (576 bytes) from UDP:192.168.1.61:49533 ---> REGISTER sip:192.168.1.4 SIP/2.0 Via: SIP/2.0/UDP 192.168.1.61:5060;branch=z9hG4bK35076381 From: <sip:111 at 192.168.1.4>;tag=0c8525a68961001f44d503e2-d9359bd3 To: <sip:111 at 192.168.1.4> Call-ID: 0c8525a6-89610004-b972d038-5864c98e

Here's the output: Feb 9 15:51:26 SSI001 kernel: SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:0f:ea:73:88:12:00:40:2b:67:5b:a7:08:00 SRC=192.168.1.54 DST=192.168.1.2 LEN=48 TOS=0x00 PREC=0x00 TTL=128 ID=51248 DF PROTO=TCP SPT=1964 DPT=139 WINDOW=65535 RES=0x00 SYN URGP=0 OPT (020405B401010402) Feb 9 15:51:28 SSI001 kernel: SFW2-INext-ACC-TCP IN=eth0 OUT=

Dear list members, I have problems to interpret the coefficients from a lm model involving the interaction of a numeric and factor variable compared to separate lm models for each level of the factor variable. ## data: y1 <- rnorm(20) + 6.8 y2 <- rnorm(20) + (1:20*1.7 + 1) y3 <- rnorm(20) + (1:20*6.7 + 3.7) y <- c(y1,y2,y3) x <- rep(1:20,3) f <- gl(3,20,

Hi, ? The current SCCP image on the 7942 phone is :SCCP42.9-0-2SR1S. We are trying to convert/upgrade the phone to SIP version of the firmware i.e : cmterm-7942_7962-sip.9-0-3 (Firmware is downloaded from the cisco support site). We have unzipped and placed all the files in the /tftp (root directory) of tftp server. Following files are also placed in the tftp directory. ? The Upgradation /

Hi there, Just wondering why my post was rejected? cheersRachel Subject: repeating autocovariate functions From: r-help-owner@r-project.org To: moyble@hotmail.com Date: Sat, 2 Feb 2013 02:56:27 +0100 Message rejected by filter rule match --Forwarded Message Attachment-- Date: Fri, 1 Feb 2013 17:56:14 -0800 From: moyble@hotmail.com To: r-help@r-project.org Subject: repeating autocovariate

Hi all, a noob here, I am trying to get outbound calls through asterisk working with Broadvoice. I have consulted the following two online tutorials: http://www.broadvoice.com/support_install_asterisk.html http://www.voip-info.org/wiki/view/Asterisk+settings+Broadvoice in an effort to make outbound calls. My current settings are as follows: sip.conf register =>

Has anyone had problems with a Cisco 7970 running sip image SIP70.8.0-2SR1S hanging up zap channels? Calls to SIP and IAX are fine. Just when the call goes out via the zap channels I have some Cisco 7960 running SIP and they work fine. Any ideas? Thanks -Eric Hall -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, ? We are new to IP phone firmware upgradation (Sorry if it is a re-post of previous question(s)). ? Recently we have bought a cisco 7942G IP phone. It currently has SIP 42.9-0-2SR1S firmware loaded on it. We do not see any option to configure a SIP Proxy where we can provide SIP Server (Asterisk PC/Device)? IP address (with current firmware on it) to register it with Asterisk. ? Do we need to

I have been forced to introduce a Cisco 7971G-GE into my network, because "it has a pretty screen." I have wasted nearly three days fighting with the thing based upon the information on voip-info.org and a few other forums. Asterisk is reporting a 401 Unauthorized. Which typically means bad username/password combination. Unfortunately, all of the usernames and passwords I see in

I am running an Asterisk server through a Cisco 7206 PSTN gateway. I am able to make outgoing SIP calls without a problem, though incoming calls have been somewhat of a problem. I am not sure exactly how sip.conf should look in such a scenario. I believe most Cisco gateways are just managed through ACL's, with no authentication, so I think I have the outgoing "peer" statement

Hi Folks, I have a snv_105 sxce host that I just can''t get to work as expected with crossbow + zones. My test host persephone, is a virtual machine running under VMware ESXi 3.5, with 2 virtual network cards (e1000), all on the same flat network/subnet. It started life just 2 days ago with a clean install of snv_95, and I LUed to 105 yesterday. To rule out any sharing issue, the first

another issues with cisco 7975 I have phone registered on asterisk have 2 different issues on different versions of firmware, on 9-4-2-1S I have not working 3way conference, when I trying to connect second call, phone says ?unable to set up conference? and sending some cisco xml data to asterisk which cannot be handled, thats the problem, I know on firmware 8-5-4 3way conference works just

Hi list, I have bought some Cisco 7941G-GE IP phones and want to use them with asterisk. Before bying I tested the whole setup with three different models of the old 79X0 series (a 7912, 7940 and a 7960). Flashing the formerly provided SCCP-Image to SIP was no problem, but now it complains about a nonexistent CTLSEP<mac>.tlv file. Most of the howtos say something about an empty file but

Has anyone successfully gotten the 7941G working on Asterisk? We're looking at getting some of those instead of the 7940's, but there's really not much info out there about them. -- Aaron Daniel Computer Systems Technician Sam Houston State University amdtech@shsu.edu (936) 294-4198