similar to: TDM400P in PCI-X Slot

I have a TDM21B (A new TDM20B that just arrived plus a X100M that I already had). This card sometimes works, and sometimes only the FXO module is seen. (correction to previous message that incorrectly listed X400M/S400M when I'm using only the single port versions of these modules (X100M/S110M). By "works", I mean all 3 modules have the green lights on the ports on and when

I'm having problems with a TDM22B. The FXO modules work fine. Both FXS modules fail to initialized. The error messages I see when the module loads: Init Indirect Registers UNSUCCESSFULLY. Indirect Registers failed verification. I already RMA'ed a TDM22B because of this problem. Now that the replacement shows a similar issue, I want to see if anyone else can think of something to

Hi, Digium stopped to produce TDM400P and the new TDM410 is too new to find it in our shops. The only alternative available is a "fully-compatible" Openvox product...but is it really "fully-compatible"? Any experience about Openvox products (card and zaptel versions, etc...)? Thank you! Giorgio.

Is the Wildcard X100P still supported? I have one sitting around that I bought 3+ years ago and never used it. I need the functionality now. Before I run off and buy something new, I'm curious if this will "just work". I also have an old TDM400P with 2 FXS modules that I bought at the same time. Then, there was no FXO module for the 400P. Will a TDM400P this old support a

Hi, I have setup Icecast2 and edcast (standalone) on an XPSP3 machine. The basic setup works. I can speak into a microphone and hear my voice from another PC on a LAN. Now I want to "stream a file" such as an mp3 podcast I made or just a song (mp3, acc etc.) or play a CD and don't know what to even search for in the mail archives, forum or Google to get help. I can't

Hello all We have tested for a mounth or two an asterisk PBX using one T1 channel bank with 24 fxs and one TDM400P digium card with 4 FXO modules. This worked with minor problems, the most notorious being some sporadic static noice or failure in the first FXO module on the wildcard. Now we have a client with 12 pstn lines and 48 extensions and we are trying to deploy an Asterisk PBX server

Hi, Ever since I recently upgraded to Fedora 25, I can't get kvm working. It's worked on this system since initial fedora 20 install. All upgrades were done via yum, then once available, dnf. I do have libvirt-sock in LISTENING state: STREAM LISTENING /var/run/libvirt/libvirt-sock I noticed I also have multiple connections in CONNECTING state: STREAM CONNECTING 0

<div><BR>Hello,</div> <div>&nbsp;I bought a TDM400P, and intended to use it with my analog phone, which is RJ11 ofcourse. So, the question now, how do I plug in my RJ11 phone to the TDM400P card, which has an RJ45 interface? Also, since it's an 11B card, I also intend to bring in an analog line into the RJ45, so i am still left with the same question....how do I go

Greetings, This may be a dumb question, but here goes. When I was on 1.4.21.2 using Zaptel, I had (at least as far as I could tell) access to line supervision on my POTS lines using a TDM400P/TDM410P. Since upgrading to the DAHDI branches of 1.4 (SVN and 1.4.26.1), I've only been able to duplicate the success of the 1.4.21 functionality once. To test what I'm talking

We are experiencing problems with FXO modules on TDM400P. From time to time they stop responding to incoming rings although they work fine if we use them to dial out. It's been verified at least in two different installations (using different mainboards) in two different locations. The only solution to the problem is to stop asterisk, then unload and reload kernel drivers. The problem appears

I'm looking to add a single FXO port to my Asterisk box. It looks like my options are a Digium Wildcard X100P off eBay for $6.99, or a Wildcard TDM400P with an FXO Module from Digium for $125. Can anyone explain the tradeoffs (other than the ability to put 4 FXO/FSO modules on the TDM400P). What about RTC for the system - I know the TDM400P provides it. Does the X100P? Thanks!

I am about to try our TDM400P E model from the developer kit (not the "Lite") we just got and noticed a large number of reported problems. I had the CVS from Sep 12 (or so the CVS/Entries file has in it). My drivers seem to modprobe fine. My card show up as "Found a Wildcard FXS: Wildcard S400P Prototype (4 modules)" in dmesg and no apparent errors...yeah. Is "S400P

Thanks for the suggestion. I have busydetect=yes in zapata.conf. You refer to "Martin's algorithm". Can you provide more details please? ----- Original Message ----- From: "Soner Tari" <list@kulustur.org> Subject: Re: [Asterisk-Users] FXO module in TDM400P (UK, BT) - Hangup detection failing To: "Asterisk Users Mailing List - Non-Commercial Discussion"

Here is my system: POWER SUPPLY 450W ALLIED ATX450P4 R(41) MB NFORCE2 A7N8X DELUXE ASUS RTL(Standard) CPU AMD|2500/333 ATHLON XP BARTON R(Standard) DDRAM 256M|DDR333 PC-2700 -K %(Standard) HD 40GB|WD 7200RPM 8MB WD400JB%(70) VGA ASUS|V8170MAGICII/T 64M MX440SE(58) CD ROM 56X|AOPEN CD-956 RTL(22) Besides the above parts, i have 2 X100P FXO PCI cards, and 1 TDM40B I bought 2 phones from radio

Hi All, I'm attempting to use two X100P cards and one TDM400P card. What driver do I load for the TDM400P? Is their any documentation for this card yet? Also, I know this has come up before but I can't seem to find it in the archieve... how do I configure the second X100P card? Anyone have a working sample? Thanks in advance, Randy

I'm testing a TDM400P with FXO module to receive incoming calls from an analogue line and send it to a SIP device. To recieve callerid, I need to use cidsignalling=dtmf and cidstart=polarity. The problem is that when a call is finished, the TDM400P seems to require about 20 seconds to prepare for the next incoming call. If a new call comes in within 20 seconds after the previous call was

Hi; I'm trying to connect a TDM400P with an FXS module to a Valcom V-9940 Paging adaptor. This port on the TDM400P was connected to a 2500 Set and was working I just re-connected it to the Valcom (which is known to work on a Telco POTS line) and its not picking up. The Valcom docs say it need a minimum of 75 Volts at 20-30 Hz to recognize a call... So the question is what ring voltage

Hi, I was wondering if it is possible to connect a skype phone adapter, for example: http://zonetusa.com/DispProduct.asp?ProductID=191 http://www.actiontec.com/products/communications/ipw_usb/index.php http://www.eradian.com/ERadianUS/staticpages/SkytoneRST301Details.htm http://www.dlink.com/products/?pid=466 http://www.usr.com/products/voip/voip-product.asp?sku=USR9620 to a TDM400P, so that

Hi Folks, Does anybody have experiences with plugging 3 TDM400P cards in one PC?? I think about a Asterisk box handling 8 incoming analogue lines and providing 4 lines to an old analogue PBX. I read a lot about trouble with the TDM400P cards so this idea seams to be not really god, or? Ciao Joerg -- _____________________ Don't PANIC

I think I have a bad FXS module on my TDM400P. Channel map: >> >> Channel 01: FXO Kewlstart (Default) (Slaves: 01) >> Channel 02: FXS Kewlstart (Default) (Slaves: 02) >> >> 2 channels configured. >> ZT_CHANCONFIG failed on channel 1: No such device or address (6) The zaptel loads ok, but the wctdm reports No such device or address and stays loaded. The