similar to: Using multiple 'peer' identities on one phone with 1.4

Hi! I'm using asterisk 1.4.17 with twinkle and a custom phone based on iaxclient 2.0.2 and I'm struggling a bit with DTMF and features.conf. While the twinkle client is able to initiate an attended transfer using *2 (as configured in features.conf), the iax client is not. I can see the DTMF messages showing up on the asterisk console, but asterisk does not invoke the features

Hi! I'm trying to get t38modem working and started with the loopback mode. I installed everything according to http://www.voip-info.org/wiki/view/T38modem+configuration+with+Asterisk and used a stock asterisk 1.4.20.1 compiled from source. Openh323, ptlib_unix and t38modem are compiled from source as well, as outlined on the wiki. Hylafax starts sending the job (sudo faxstat -s shows one

Hi! I'm trying to build an HA system using heartbeat for failover. Everything works fine with SIP, but I cannot connect my IAX phone to the asterisk server using the managed IP address. Here is the configuration of the server (asterisk and the IP address are up, 'ip addr' and 'netstat' output): 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast

I'm getting dozens of these at a very high rate: [Jan 20 09:15:27] NOTICE[16958]: chan_sip.c:12687 check_auth: Correct auth, but based on stale nonce received from '"" <sip:121 at gnat.com>;tag=as5f1a9480' [Jan 20 09:15:28] NOTICE[16958]: chan_sip.c:12687 check_auth: Correct auth, but based on stale nonce received from '"" <sip:130 at

Could anybody explain this results? >sin(2*pi) -2.449213e-16 #should be zero >(10^16)*sin(log2(4)*pi) -2.449213 #should be zero too and explain what to do to correct this events? Thanks!!! Branimir K. Hackenberger

Kevin Larsen <kevin.larsen at pioneerballoon.com> schrieb: > The phone you gave your wife is really old. Are you sure it supports SIP > OPTIONS? Can you make a call in or out to it? If you can, it is more > likely that it just doesn't support that and you can't use a qualify > statement. No, I'm not sure. And no, I can't make any call, right now... At least,

Dear R-helpers! What it's means "Rank failure in Choleski decomposition" by using of function surf.gls {spatial}? Sincerely Yours Branimir K. Hackenberger

Darryl Moore <darryl at moores.ca> schrieb: > Ahh. Seen that before! That suggests to me that you don't have your > sip.conf records setup right. > > What's your sip.conf look like? Well, here what I wrote in my sip.conf: register => 00493511111111:MYSECRET at pbxluca/00493511111111 register => 00493512222222:MYSECRET at pbxfax/00493512222222 register =>

I`ve been noticing alot of those messages in the CLI lately: Apr 5 11:18:02 NOTICE[25593]: chan_sip.c:6444 check_auth: stale nonce received from '<sip:reg-1@pbx.domain.com> I haven't changed my configuration in ages. What could be the cause of this suddent appearance? Mike -------------- next part -------------- An HTML attachment was scrubbed... URL:

I get this when my brother in law tries to call in from his box to mine. WARNING[4855]: chan_sip.c:12675 check_auth: username mismatch, have <100>, digest has <s> or after changing the register line: WARNING[4855]: chan_sip.c:12675 check_auth: username mismatch, have <100>, digest has <199> I have done everything I can think of and still failure. Currently the

I'm receiving the following error over and over, adnauseam: Oct 1 23:59:53 NOTICE[3194]: chan_sip.c:5890 check_auth: stale nonce received from 'CNAME-CID <sip:5551212@192.168.1.X>' Does anyone know what "stale nonce" is? Thanks! Paul Conn -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello everyone, I am just starting a project for school in RoR and I am a complete n00b ^^ Here''s my problem : I need to get the user''s login stored in the session but for some reason I cannot. Here''s my login method code : def login if request.post? @user = User.find_by_username(params[:login]) if @user and @user.password_is? params[:password]

Hi masters! I've this Asterisk 1.4.15 running. yesterday I had to change the firewall schema that I had before. I use to have a FW that would be my network FW/Proxy and do the NATs for Asterisk. This FW was receiving too many requests from my LAN and it was making the Asterisk 'cut' the calls or reach very high latency. Yesterday I added a new FW just for this Asterisk. The same

Hi I'm sorry. I mailed the same question again. because, it cannot be yet solved. any ideas with asterisk? [Aug 20 14:40:12] WARNING[29315]: chan_sip.c:11806 check_auth: username mismatch, have <aaaa>, digest has aaaa at 192.168.0.1[Aug 20 14:40:12] NOTICE[29315]: chan_sip.c:20479 handle_request_register: Registration from 'aaaa <sip:aaaa at 192.168.0.1>' failed for

I just updated one of my stable asterisk systems to head to test it out.. and I'm receiving a interesting log message now in asterisk.. Aug 2 13:20:56 NOTICE[15382]: chan_sip.c:5617 check_auth: stale nonce received from '<sip:3034585725@voip.livewirenet.com;user=phone>' (one line per registration) I'm using an AudioCodes mp108.. it worked fine with the latest stable..

We have a caller ID from our phone provider "Shaw Cable" (digital phone) and it was working OK until recently. I get an error: WARNING[6769]: chan_sip.c:8553 check_auth: username mismatch, have <4>, digest has <pstn-4444> NOTICE[6769]: chan_sip.c:14316 handle_request_invite: Failed to authenticate user THELMA <sip:7804789998 at 10.10.0.103>;tag=50e17675d59121c4o1 at

Hi list, We have devices since more then 4 years which where running well with Asterisk. But with latest version (1.38 or more) we face problem with those devices when they try to register. We got [2011-05-14 17:18:06] WARNING[28559]: chan_sip.c:9950 register_verify: Failed to parse contact info <--- Transmitting (NAT) to XXX.XXX.XXX.XXX:5062 ---> SIP/2.0 400 Bad Request Followed by

Hi Guys, I am using the latest stable version of asterisk which I updated yesterday, but I keep getting this error message for some of my accounts. Can anyone explain to me what does this mean? "WARNING[3032]: chan_sip.c:4832 check_auth: Stale nonce received from". Thanks Joel

Hi All, I installed Asterisk recently and it was working from 2 weeks without a problem until today. Today it started showing strange error Feb 28 03:14:08 WARNING[31430]: chan_sip.c:4826 check_auth: Stale nonce received from '<sip:18006733555@mantragroup.com>' Whatever number I call it displays this, please tell how can I fix this? I have no idea what is happening and the cause

Hi, When I am debuggin any peer, I get swamped with those messages: chan_sip.c:8866 check_auth: Correct auth, but based on stale nonce received from xyz This seem to make up around 2Mbits/s of data (estimated after a quick tcpdump). Any ideas? This is while the server is idle (no calls, lots of registrations of course, but nothing worth 2Mbits/s) Regards, Mike