similar to: I can't receive fax

We run a CentOS-5 based hylafax server with external serial modems. We are transitioning to an Asterisk system using IAXmodem running on CentOS-6. On the CentOS-5 system to start the fax modems we added these lines to inittab: # Add fax lines and always ALWAYS run "telinit q" after making a change. fax1:2345:respawn:/usr/sbin/faxgetty ttyS0 fax2:2345:respawn:/usr/sbin/faxgetty ttyS1

I have all three running on the same box. I say OT because it appears asterisk is doing it's job just fine. It must be an IAXmodem or faxgetty (hylafax) problem When faxes work, they look great. I have ten IAXmodems setup with different ports and they register fine. I have ten faxgettys that startup fine. I start the IAXmodems and then faxgettys in inittab. They are setup as a roll

Hello, i try to setup asterisk with hylafax: the config is: egrep -v "(^#|^$)" /etc/hylafax/config.ttyIAX0 CountryCode: 49 AreaCode: xxx FAXNumber: +49xxxxxxxx LongDistancePrefix: 0 InternationalPrefix: 00 DialStringRules: etc/dialrules ServerTracing: 1 SessionTracing: 11 RecvFileMode: 0600 LogFileMode: 0600 DeviceMode: 0600 RingsBeforeAnswer: 1 SpeakerVolume: off GettyArgs:

I'm running into a strange issue with Asterisk + Iaxmodem + hylafax on the same machine. After rebooting the iaxmodems don't register to asterisk. Stoping and starting the relevant services gets it working, but what is the point of using init scripts if it does not work right? I already tried to adjust the init scripts in /etc/rc3.d so I have: S50asterisk s90iaxmodem S95hylafax So it

A few weeks ago, I lost my Trixbox that was all set up with Hylafax and IAXmodem. I am trying to set it up for email > procmail > faxmail > iaxmodem > asterisk >sipext > ATA (with attached fax). I have followed all the instructions on creating the IAX extension and configuring the IAXmodem config file. I can see the connection in Asterisk: iax2 show peers Name/Username

Hi: I want to receive a fax with an E1 link connected to A102d card from a fax machine,but after dialling the phone number, it connects then will be busy.In fact asterisk can't detect the fax.These are zapata.conf, extensions.conf filels and debug in console: extensions.conf: [from-pstn] exten => 9711315,1,Answer() exten => 9711315,2,Wait(10) exten =>

Hi, I have problems with asterisk and hylafax+ iaxmodem. I can successfully send faxes to Panasonic KX-FT932 fax, but with Xerox WorkCentre M20i I have problems: No carrier. This is hylafax log, maybe you can suggest me where to find ... Oct 17 07:38:48.22: [22428]: SESSION BEGIN 000000041 180037052390906 Oct 17 07:38:48.22: [22428]: HylaFAX (tm) Version 4.4.2 Oct 17 07:38:48.22: [22428]: SEND

Hi, I'm trying to receive faxes using hylafax / iaxmodem but I just can't get it to work. We're using Sangoma E1 cards and have calls coming in over PSTN. I've tried turning hardware echo cancellation off but it makes no difference. This is what I get in /var/spool/hylafax/log: [root at faxhost log]# cat c000000003 Jan 14 12:44:43.39: [ 3403]: SESSION BEGIN 000000003 18005551212

Can anybody point me in the right direction please? I'm having some issues getting iaxmodem and hylafax to talk to each other. I have no doubt that someone has had this type of issue before but I can't find anything useful in the archives or on Google. Under RH9, with chan_capi 7.1, Asterisk 1.2.24, with an AVI Fritz ISDN2e BRI card all working perfectly... I've downloaded and

Hi! from 2 days I'm trying to run hylafax server and iaxmodem with Asterisk 1.8.5. I have 2 computers in the lan, one is the Asterisk PBX and the other is the server with hylafax and iaxmodem installed. In Asterisk I set up an IAX trunk in this way: ___________________________ iax.conf [iaxmodem] type=friend context=outgoing-fax disallow=all allow=ulaw username=iaxmodem secret=password

I try to use hylafax to send fax, but i encounter with TRAINING failed error I try many times to send a fax to fax machine whose type is Canon Laser Class 9000 Series I always failed with the TRAINING failed error but succeed 2-3 times I also send fax to another machine whose type is Panasonic And I failed all the time with the same error without any success When using windows's fax modem to

JID Pri S Owner Number Pages Dials TTS Status 58 123 S root 008675533661 0:2 4:12 02:12 No carrier detected Here is the asterisk output: [Mar 28 01:54:00] NOTICE[16753]: chan_iax2.c:6025 update_registry: Restricting registration for peer 'iaxmodem' to 60 seconds (requested 50) -- ast_get_srv: SRV lookup for '_sip._udp.voipuser.org' mapped to host

Hello, I have anolog lines coming throug Dahdi to Asterisk Server, one of the anolog lines is used for fax line. I received fax fine without any problems using Iaxmodem with Hylafax Server. Outgoint fax is the problem, when IAXMODEM dial out using Dahdi channel, dahdi answers and start to dial the outside number however Iaxmodem thinks that dahdi is the remote fax machine and starts sending fax

Hi, we have a faxserver with Asterisk, IAXModem and Hylafax. Faxes come from a SIP trunk to Asterisk, then are forwarded throught 5 IAXModems managed with Hylafax. Hylafax users can also send faxes to these modems and Asterisk send them throught the SIP trunk. We also have a dedicated modem used only for sending faxes coming from an Hylafax dedicated user. Sometimes Hylafax reports that a modem

I'm able to recieve fax with pure SpanDSP 0.0.2 + Asterisk successfully but I have problems with some fax machine so I wanted to try using HylaFax to recieve Fax instead of SpanDSP hoping that it'll solve my problem. I'm trying to connect Asterisk with SpanDSP using iaxmodem. My system looks like this: ISDN <---> Asterisk <---> IAXModem <---> Hylafax Asterisk and

I'm able to recieve fax with pure SpanDSP 0.0.2 + Asterisk successfully but I have problems with some fax machine so I wanted to try using HylaFax to recieve Fax instead of SpanDSP hoping that it'll solve my problem. I'm trying to connect Asterisk with SpanDSP using iaxmodem. My system looks like this: ISDN <---> Asterisk <---> IAXModem <---> Hylafax Asterisk

I think I'm very close to getting IAXModem and Hylafax going, but my current inbound hylafax logs show this: Feb 23 10:09:37.98: [ 3638]: MODEM <Empty line> Feb 23 10:09:37.98: [ 3638]: MODEM TIMEOUT: waiting for v.21 carrier Two questions - 1) Does anyone know what step I missed here? (I.e. please help!) 2) Is there a document I should be working off of? Google doesn't seem to

This is what you show CBeyond. You have some vouchers there from CBeyond that will allow me to get paid from them not you. Chuck Coleman President CCI Technologies/CC Call Center/CSI Technologies Director of Managed Services for Gurus2go Cell 510-439-6501 Confidential Email: This email and any files transmitted with it are confidential and intended solely for the use of the individual or

Hi, I'm running asterisk 1.2.1 and started to play with iaxmodem 0.0.7 running on the same box. I wonder how to setup the iax account correctly so that I may initiate outbound calls via iaxmodem? registration upon iaxmodem startup is okay and I can direct calls to it. -- Registered IAX2 'iaxmodem' (AUTHENTICATED) at 127.0.0.1:33874 But upon an outbound call setup request from

I am trying to build an rpm package for iaxmodem-1.2.0. At the moment I am still trying to get a working spec file put together. I have managed to get an SRPM produced but the binary build from this fails due to there being no install task in the Makefile.in provided with the source. I have found a spec file from opensuse that provides this in the install portion: %build [