similar to: Parked Calls in 1.4.23.1

So, I can't figure out how to get the parkandannounce application to work the way I want it to... I have cisco 7960 IP phones using SIP, and this is what I have in my extensions.conf: exten => 700,1,ParkAndAnnounce(pbx-transfer:PARKED|90|SIP/${EXTEN:1}|internal,${EXTEN:1},1) exten => 700,2,Hangup and in my parking.conf: [general] parkext => 700 ; What ext.

Hi all. I am trying following scenerio for call park & pickup. voice is flowing established between B & C, after call-pickup ( instead of A & B ). can anyone please clarify why it is happening like this, ( or ) do i need some more configuration for park&pickup ? A B

I am using Polycom 501s with asterisk 1.2.4. When transfering to call parking wih "#1" -> 700 the user is able to hear asterisk tell him what extension the call was parked on. However, when I press "transfer" -> blind -> 700 . The user is not able to hear what extension the call was parked on. It seems like the polycom is hanging up before asterisk is able to

I'm still struggling to pickup calls. I now have a single context (entryocginternal) where I have "include => parkedcalls". The log below shows me calling from one internal extension to another, then picking up, then parking the call. -- SIP/239-0915d5c8 is ringing -- SIP/239-0915d5c8 answered SIP/233-0915bf40 -- Packet2Packet bridging SIP/233-0915bf40 and

Does anyone know why the bt100 cannot park and pickup a parked call? attendant announces the call is parked at extension 701 but the call cannot be retrieved by any other phone. also, the bt100 constantly rings when the phone is hung up after parking. anyone experienced this? using the basic features.conf [general] parkext => 700 ; What ext. to dial to park parkpos =>

Hi, I am having a very weird problem with call parking. I have defined call parking correctly, as it work well when parking calls and picking them up. The problem is what happens after the the 45 seconds have expired. The behavior wanted is that the person who put the call on "park" is called back after 45 seconds. What ACTUALLY happens is that the phone who got put on park

Hi, I'm having problem with call parking. When I park call, either via transfer to xten or park digit sequence from features.conf, I hear the parking lot number read to me and the user gets transferred. However, MOH stops for the caller the moment user is transferred. The user can be retrieved by dialing the parked extension and voice resumes. If the parked user hangs up, the channel state

I have the standard parking.conf but extension 700 doesn't show up in my dialplan.... Why? I can dial 701 which tells me that I don't have any calls parked there. 700 just gives me invalid extension noise.... Should I have extension 700 defined elsewhere? Thanks parking.conf [general] parkext =a 700 ; What ext. to dial to park parkpos => 701-705

I am perplexed by this so I how someone can help me out. On one of my servers the users began complaining that if they picked up a parked call they could not use the # key to transfer the call. This is a particualarly annoying issue since everyone has been taught to use #700 to park calls. At first I thought it was a DTMF issue with the polycom phones, since rebooting seemed to fix the problem.

Hi, I'm unable to pick up parked calls after they are transfered. I get the "transfer" message when I press # and then I'm told "701" The extension I'm dialing goes to the on hold music. I'm disconnected, I hang up, dial "701" and I see this message on the console "Everyone is busy/congested at this time" I just have the default

My company for various reasons has asked that I come up with a way to have previously parked calls be re-parked in the same parking slot. I have looked at setting up asterisk so that the receptionist chooses which slot to place a call, but I think there is an easier way. That is when I came up with the idea of "Sticky Park". Here is how it would work. A call would come in and

All, Quick question that hopefully someone out there will know the answer to... We were previously running Asterisk 1.4.(something) (I forget which one) on Debian. Due to an office move, I am temporarily routing our calls through an Ubuntu box that I have. It runs Asterisk 1.4.17-dfsg-2ubuntu1 (basically, what came with Ubuntu.) Here's the problem I am having: We are using Polycom

Hi all, If I have multiple extension contexts for different businesses sharing an * pbx, and I include => parkedcalls in each of these separate contexts, would someone at biz-1 be able to pick up a parked call that someone in biz-2 parked? I _don't_ want this to happen -- I'd like to be able to include a different "parkedcalls" context in each business' context, and

Using the default features.conf setup, if I include parkedcalls in my dialplan, and a call gets parked, and times out, where does the call go? Does it go to a timeout extension in parked calls, or does it go to a timeout extension in the original context? (Using an AEL based dialplan similar to below). -- context internal { ... ... t { jump 600 at

100% repeatable (for me). Sip phone A calls Sip phone B. Either Sip phone A or B does #700. The party that keyed #700 gets the parked announcement (eg 701) and the other party get MOH. There is still an audio channel between the two SIP phones at this point. When the party that typed #700 hangs up, Asterisk crashes. This has been working in previous 1.4's (but not 1.4.10) and I

I'm trying to get call parking to work, but I've run out of things to try. I can place a call between two internal extensions, then on one extension transfer the call to extension 700, and the call gets parked on 701 but I don't hear the extension number when I do the transfer. I can hangup and call 701 and get the call back. Here's what I see: (comments added on lines starting

Hey All, I am working on a SIP Call bridging application. Every time I receive a incoming call in Asteriskserver1 my AGI should alert to AsteriskServer2 and AsteriskServer2 should callback to AsteriskServer1 and call should be bridged on specified extension. (making call in this way is customer requirement) Every time I receive a call in AsteriskServer1, I Park the call and through AGI,

Ok, a little patch that adds a little functionality to call parking. With that, you can pickup the older parked call, if many are in the parking lot. The default exten to do that is 750, but can be changed by setting "parkpick => exten" on parking.conf , like [general] parkext => 800 ; What ext. to dial to park parkpos => 801-820 ; What extensions to

I`m having (a lot of) trouble changing the call parking timeout behavior. This is my SIP context [internal-local-only-hamel] exten => s,1,Hangup include => parkedcalls What I am trying to accomppish is a quick test where I park a call, wait 45 seconds, and it hangs up. Here is my execution in the CLI: == Parked SIP/0004f2134384-1-0943e8a0 on 101 at parkedcalls. Will

Hello, all. I'm having a deeply frustrating time getting multiple parking lots to work and am wondering what I am doing wrong. I am using Asterisk 1.6.1.1. I defined two separate parking lots in features.conf as follows: [parkinglot_a100] ; SSI context => a100-parking parkpos => 900-920 findslot => next [parkinglot_a10] ; EBC context => a10-parking parkpos => 800-820