similar to: No Audio PlayBack Asterisk 1.6 Dahdi 2.1.0.3

Asterisk supports SIP-T? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090217/7cc67800/attachment.htm

Hi to all. I'm trying to use meetme on asterisk 1.4.22.1. On a debian i've compiled (as i need h323 support) openh323_v1_18_0 pwlib_v1_10_0 dahdi-linux-2.1.0.3 dahdi-tools-2.1.0.2 asterisk-1.4.22.1 All works fine, dahdi status is: asterik:/data/programmi# /etc/init.d/dahdi status ### Span 1: DAHDI_DUMMY/1 "DAHDI_DUMMY/1 (source: RTC) 1" (MASTER) asterik:/data/programmi#

Hello gang, We just got MaBell to turn on our callerid. I tested the capability with a southwest bell box and a plain phone, so I know the line is sending the signal. I'm running Asterisk SVN-branch-1.4-r204834 using a TDM400P card. Here is my dahdi_cfg -vv output: dahdi_cfg -vv DAHDI Tools Version - 2.1.0.2 DAHDI Version: 2.1.0.3 Echo Canceller(s): MG2

Hello there: I think I have a silly kernel configuration problem. I'm running: * vanilla 2.6.27.10 kernel built from source * dahdi-2.1.0.4 built from source So far so good, dahdi module loads just fine: dahdi: Telephony Interface Registered on major 196 dahdi: Version: 2.1.0.4 when I try to: hal04 dahdi # modprobe dahdi_dummy FATAL: Error inserting dahdi_dummy

Hi List. I have a small problem in using the transfer key transfer of IP Phone in Asterisk 1.6, I think I spend some detail in the configuration but can not find. What happens is, when I do a transfer using the Transfer button, the phone, does not play the music on hold, which is waiting on the phone is silent, and I have the same settings on a 1.4 server, and the music plays correctly when

Hi List. It is possible to travel over the X.25 protocol on Asterisk SIP? -- Atenciosamente Daviramos Roussenq Fortunato -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100928/7d6ca5fd/attachment.htm

Hi. I have a Debian Leni system with asterisk-1.8. I was trying to get meetme to work and it depends on dahdi, so I compiled dahdi-trunk and dahdi-tools-trunk, however, when trying to insert dahdi_dummy, it complained about symbol crc_ccitt_table, although the module was actually there in the kernel tree. So, I took the Debian source, and I had the config and I did make Bzimage, make modules

I have a TDM400. Just updated Fedora 12 to kernel 2.6.32. Rebuilt and installed dahdi-2.2.1. kernel modules loaded. lsmod | grep wctdm wctdm 37233 0 dahdi 194985 1 wctdm lsmod | grep dahdi dahdi 194985 1 wctdm crc_ccitt 1549 2 dahdi,isdnhdlc dmesg: dahdi: Telephony Interface Registered on major 196 dahdi: Version: 2.2.1

Hello I was editing files manually, and noticed that if I include the familiar "fxsks=1" in /etc/dahdi/system.conf, Dahdi fails loading: ===================== # cat /etc/dahdi/system.conf loadzone = fr defaultzone = fr fxsks=1 ===================== # /etc/init.d/dahdi start Loading DAHDI hardware modules: wctdm: [ OK ] /usr/share/dahdi/waitfor_xpds: Missing

Howdy, I am playing around with asterisk within an LXC container on Ubuntu 11.04. I have asterisk (1.4.42) running fine, but want access to dahdi_dummy for timing (meetme). I have dahdi installed on the "host", and dahdi_dummy is loaded: root at astnorth:/# ls -ltr /dev/dahdi total 0 crw-rw---- 1 root root 196, 250 2011-06-08 13:59 transcode crw-rw---- 1 root root 196, 253

The Asterisk development team has released dahdi-linux 2.1.0.3 and dahdi-tools 2.1.0.2. These releases are available for immediate download from http://downloads.digium.com. dahdi-linux was updated in order to fix several issues when compiling on kernels prior to 2.6.18 as well as a condition in the wcb4xxp driver that can result in a kernel crash when connecting a cable to a port that was

The Asterisk development team has released dahdi-linux 2.1.0.3 and dahdi-tools 2.1.0.2. These releases are available for immediate download from http://downloads.digium.com. dahdi-linux was updated in order to fix several issues when compiling on kernels prior to 2.6.18 as well as a condition in the wcb4xxp driver that can result in a kernel crash when connecting a cable to a port that was

Hello all, Ok it is Sunday afternoon and I am going crazy. I have been running in circles so long that I can't think straight. As an example, I sent this message to the wrong address the first try, AAARRRRGGGGGGHHHHH. I have Asterisk 1.6.0.6 and DAHDI Tools Version - 2.1.0.2, DAHDI Version: 2.1.0.4, OpenSuSE 10.3 x86_64, tdm422 at the end of installing dahdi-linux and dahdi-tools I get:

I am installing dahdi on a machine lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge 00:01.0 PCI bridge: Hewlett-Packard Company Unknown device 9602 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) 00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) 00:06.0 PCI bridge: Advanced Micro Devices [AMD]

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all! Days ago I bought a OpenVox A400P card with a port FXS and another FXO that I am testing with my Asterisk installation in my house. I'm using Asterisk 1.4.24.1 with DAHDI Linux 2.1.0.4 and DAHDI Tools 2.1.0.2 on Debian GNU/Linux Lenny. I was reading "The future of telephony" and this [1] document looking for information about

Hello, ? I have a Cologne Chip Designs GmbH ISDN network Controller [HFC-4S] card which seems to work on 1 machine but not on another. It SHOULD load this driver: ? >dahdi_hardware -v pci:0000:00:00.0 wcb4xxp+ 1397:08b4 Junghanns QuadBRI ISDN card Instead of: >dahdi_hardware -v pci:0000:00:00.0 qozap- 1397:08b4 Generic Cologne ISDN card There is no qozap modul in

The Asterisk Development Team has announced the releases of: DAHDI-Linux 2.6.1 DAHDI-Linux 2.5.1 DAHDI-Tools 2.6.1 DAHDI-Tools 2.5.1 DAHDI-Linux-Complete 2.6.1+2.6.1 DAHDI-Linux-Complete 2.5.1+2.5.1 These releases are available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools

The Asterisk Development Team has announced the releases of: DAHDI-Linux 2.6.1 DAHDI-Linux 2.5.1 DAHDI-Tools 2.6.1 DAHDI-Tools 2.5.1 DAHDI-Linux-Complete 2.6.1+2.6.1 DAHDI-Linux-Complete 2.5.1+2.5.1 These releases are available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools

Hi, I am running Fedora 7 VM. On an earlier configuration with zaptel and Asterisk 1.4.21 , meetme worked alright. I upgraded to Dahdi and Asterisk 1.4.26, and the result is choppy sound via Meeme, while a simple Musiconhold works OK with descent audio quality. So I am sure its a Dahdi_dummy problem. Running dahdi_test gave me very poor results. Opened pseudo dahdi interface, measuring

The Asterisk Development Team is pleased to announce the release of DAHDI-Linux and DAHDI-Tools version 2.2.1. DAHDI-Linux 2.2.1, DAHDI-Tools 2.2.1, and DAHDI-Linux-Complete are available for immediate download at http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete These