similar to: Asterisk 1.4.21.1 intermittent presence working with Polycom

Hi All, I've been testing reliability with t.38 faxing pass through with * 1.4.21.1, Linksys ATA's 2102 x 2, Sharp UX-B800SE and Cannon ImageClass D880. cannon> <2102 #1> <SIP> <*> <SIP> <2102 #2> <sharp Started out with default settings on all devices, configured Asterisk to handle T.38 pass through, the configuration I believe is solid. I get

JR Richardson Engineering for the Masses> -----Original Message----- > From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users- > bounces at lists.digium.com] On Behalf Of asterisk-users- > request at lists.digium.com > Sent: Saturday, March 01, 2008 12:00 PM > To: asterisk-users at lists.digium.com > Subject: asterisk-users Digest, Vol 44, Issue 1 > >

Hi All, I made the decision recently to update some old call servers from 1.2.x to the latest 1.4.28. I spent 2 weeks in the lab testing every production requirement for these voice servers. Nothing too special, SIP in, database lookup, SIP out, a couple of special applications, write CDR to billing server, nothing intensive at all. I also performed stress testing for call capacity, database

Hi All, I have a pretty standard Asterisk PBX setup with 60 SIP Peers, mostly Polycom 501's and a receptionist phone, Polycom IP 601 with 3 attached sidecars and Buddy Watch enabled monitoring all other SIP phones. The problem occurs when a group (all SIP peers) Page is called. Not always but sometimes when the Page is executed, the IP 601 will become unreachable from Asterisk. So when the

Hi All, Has anyone gotten the polycoms or the linksys phones to accept oprtion 66 on the dhcp request for the address of the tftp config server? We have the dhcp server issuing the proper IP of the tftp server, but the phones just sit there and never try to contact the tftp server for their configs. We can see the proper option going from the dhcp to the phones with ethereal trace. Thanks JR

On Wed, Jan 20, 2010 at 2:42 PM, JR Richardson <jmr.richardson at gmail.com> wrote: > Hi All, > > I'm using Asterisk 1.4 branch and checking the status of some SIP > Peers with the functions ${SIPPEER(101:status)} and the result is "OK > (48 ms)". ?Seems to work fine. > > Now I would like to use the function CUT to set a variable with the > 'OK'

On 6/26/07, JR Richardson <jmr.richardson at gmail.com> wrote: > Hi All, > > I have Asterisk 1.2.9.1 sending SIP calls to a Cisco 2620XM Router > with a PRI card in it, handing off to a PBX and vise verse. Calls in > and out are working fine except for DTMF from Asterisk to the 2600. > DTMF from the 2600 to Asterisk is fine. > > Here are the Asterisk console warnings

> -----Original Message----- > From: JR Richardson [mailto:jmr.richardson@gmail.com] > Sent: Saturday, June 17, 2006 2:30 PM > To: asterisk-users@lists.digium.com; Douglas Garstang > Subject: Voicemail with NFS (working, I think) > > I'm using a stand-alone VM server and exporting the VM files ro for > MWI function only. All my registration servers mount the remote

OK this was an easy one to fix. All I had to do is RTFM. Note on the wiki: ATTENTION: Make sure you take a look at bug report 7144 Just do what Kevin said, include the regcontext in whatever static context you have the priority 2 extension and don't make a static regcontext in extension.conf. Let sip module do the rest. Works great. Thanks Guys. JR On 12/5/06, JR Richardson

Is this with Asterisk in the RTP stream? Is it doing any transcoding? > -----Original Message----- > From: JR Richardson [mailto:jmr.richardson@gmail.com] > Sent: Tuesday, April 18, 2006 9:34 AM > To: asterisk-users@lists.digium.com > Subject: [Asterisk-Users] Asterisk Performance 350 Concurrent > ChannelsWorking Nicely > > > Hi All, > > This is a performance

On 1/28/08, JR Richardson <jmr.richardson at gmail.com> wrote: > > You need to take a step back and first test the script without using > > MRTG. Execute it like this: > > # /opt/bin/asterisk-mrtg -h localhost -u XXX -p XXXX -1 SIP -2 Zap > > 10 > > 10 > > 10 > > 10 > > > > You should get 4 lines of numbers. That respresents your SIP

Hi All, I'm running 1.2.9.1 and have a sip user setup with accountcode=4444 in the context. lab1*CLI> sip show peer 1234 * Name : 1234 Secret : <Set> MD5Secret : <Not set> Context : sip1004 Subscr.Cont. : <Not set> Language : Accountcode : 4444 AMA flags : Unknown CallingPres : Presentation Allowed, Not Screened Callgroup

Hi All, Strange issue, recently I started getting a lot of .lock files in the voicemail /INBOX folder preventing proper access to voicemail. I can delete the .lock files and everything is normal. After searching around, I found some SIP lock file stuff but nothing specific to voicemail. Can someone point me in the right direction to resolve this? I'm runnning 1.2.9 on Debian Sarge.

Hi All, Anyone know the sip header to send to a Linksys to resync it's config file? Thanks. JR -- JR Richardson Engineering for the Masses

Hi All, http://www.voip-info.org/wiki/index.php?page=Asterisk+func+cdr Under example: exten => s,2,Set(CDR(MyFavoriteBand)=Foo Fighters) exten => s,3,Set(CDR(MyFavoriteSong)=Hero) and under description: -userfield: The channel's user specified field. ""-any custom value that you wish to store."" My question is how do you setup more custom fields in the cdr and be

Hi All, Has anyone else noticed that when a sip phone sitting behind a nat registers to asterisk using realtime database, the private IP of the phone is put into the fullcontact field instead of the public contact IP. The database has the correct public IP in the ipaddr field and correct port number in the port field, which is actually what asterisk uses to to contact the device. This

Hi All, I'm running 1.2.9.1 stable. I'm wondering has this patch been applied to stable release or is it still only in CVS. Will this file patch apply correctly to 1.2.9.1 stable? Which file do I patch? I'm guessing app_directory_realtime_1.6.1.patch <http://bugs.digium.com/file_download.php?file_id=4915&type=bug> and config.h.patch

Hi All, I have 1.4.9.1 setup, with the compiler flags enabled for T38, and have a Mediatrix 2102 and a Linksys SPA 8000-G1. I can pass faxes between devices but can't seem to invoke T38 pt UDPTL. It's enabled in sip.conf [general] and well as the [peer]. I get an error at the CLI: WARNING[3096]: chan_sip.c:14149 handle_request_invite: RTP re-invite after T38 session not handled yet !

> I have a customer that has two buildings that are connected with a > fiber link. We have a single Asterisk server to cover both buildings. > Now the customer went and bought an overhead paging system for the > remote building and they want to integrate it with Asterisk. Is there a > device that can connect over IP or an ATA that has an audio output port? > The buildings

Hi All, I'm trying to track down an intermittent echo issue. My setup is <phone>sip<asterisk>sip<tnt>pri to carrier less than 10ms latency on the network, 100% SIP, ULAW I have several different phones; cisco, linksys, polycom, snom. It's difficult for me to reproduce the problem regularly so I'm really having trouble isolating anything. I'm wondering if this