similar to: CallerID ANI issues

I receive calls over a T1 with callerid and then *ani*dnis*. I am able to strip out the ani and the dnis in the dialplan but when I try to set the caller ID to be the ani, it looks ok but then if I do a NoOp callerid on the next line, I get unknown. Here is the section of my dialplan: exten => _*NXXNXXXXXX*NXXNXXXXXX*,1,Set(ANI=${EXTEN}) exten =>

I've recently noticed some oddities in my CDR records. In some cases the original CallerID that I've set in the .conf file for the extension showed-up in the CDR as the originating extension (on Zap/ devices on the channel bank), and in other places it was the one that I set using Set(CALLERID(num)=<something>) (SIP/ devices). Digging around a little in the source (and doing some

Hi, does anyone of you have made it to get the ANI also picked up? I mean: if I fetch a foreign call to me by using the pickup application I want to see the callerID/ANI of the caller to the foreign extension. Is that possible and if yes - how do I achieve that? Regards, Christophorus

does anyone know how to route a call coming in with ANI*DNIS* Oct 31 12:47:41 VERBOSE[30056] logger.c: -- Executing Set("Zap/49-1", "DID=1231234*4812*") in new stack I tried making a route for _.*4812* but that matched everything rather then just the dnis i wanted.. any ideas? I would preferably like pass the callerid along to my extensions, but for now the important

Hi All, My research indicates ANI is not really supported with SIP Channels or passed between SIP servers, even with setting function CALLERID(ANI). So the only place this applies is on PRI interfaces, when sending calls out a ZAP PRI you can set the ANI to whatever and CID Number to a different whatever so on the other end of the PRI you will receive the two different values? Is this correct or

Is there a setting somewhere in * to define whether I am receiving callerID or true ANI? Global Crossing claims they are sending ANI but I dont think so. My understanding of ANI is that it is always sent, regardless if callerID is blocked. If I dial *67 and my DID, I get "Presentation: Presentation prohibited of network provided number" and no number. Before I call GC on Monday

OK I am going to do it again. Global Crossing is now sending ANI but it is not in the format I expected. Any one know of a way to get this data into two seperate variables? The first number is ANI and the second is DNIS so it is "*tendigits*tendigits* on one line like below. < Called Number (len=26) [ Ext: 1 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan

Hi, I have some trouble with setting my CallerID if i make an international Call. No Problems with National Calls, i can set whatever I want. We pay for this service but our telephone provider was not able to state clear, wether the number we set on an international call should be shown on the other side. Actually only our base number shows up. If I understand it correctly, in every call the

When Asterisk sends a call to "a phone company" via a PRI/Dahdi, does it actually send CALLERID(ANI), or only CALLERID(NUM)? Cary Fitch

Sadly it's a limited to PRIs(at least that's what I've been told) You just can't send that much call data with a good old non-PRI T1. The up side is you get one extra voice channel to use as compared to a PRI. It's strange that the carrier doesn't have PRI cabability, I've run into many more carriers that can't do non-PRI. I've even had one that couldn't

Hi, I am using phpagi for agi scripting. and want to update callerid number but didn't get any success. please help me how to update PHPAGI is new for me. Below is the code which I write. #!/usr/bin/php -q <?php set_time_limit(30); //require(.phpagi.php.); include("phpagi.php"); $agi = new AGI(); //answer the call $agi-> answer();

Has anyone in the UK got ANI to work on an inbound call ? Using asterisk 1.4 trunk and zaptel 1.4 trunk, with a Euro-ISDN 30 Julian ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email

Hey Don, How are you? I may be heading your way in the next month or so. Have to meet with a guy in Eden Prairie, and stop off at my brother/sisterm-in-law's as well. Got a question for you - with TBCT, who pays for the call once it is transferred? Still me as the owner of the trunk? Lets say I take a call that was dialled locally (caller believes this is "free"), and I do a

I have a question regarding the flags for hiding caller ID presentation: My customer has a requirement that they are able to specify if outbound calls (on a T100P) will have the caller ID displayed or not. This could be easily solved, of course, by not setting a caller ID when creating the outbound call. However, the PRI to which this T100P is connected _must_ see a valid caller ID, and the

Im trying to figure out the base way to check the callerID being sent to my Asterisk box and use it if it is a valid NANP number, but replace it with a static NANP number if it is not. (Why? I have a few carriers that require this, and a few international users - if it happens to take one of the carriers that require it, I want it to set a static number that is valid). I'm playing

I've found an interesting behavior in callerid handling. I have very long callerid coming in or maybe just improperly combined information. In any case the result is that the caller ID is set to asterisk on the outgoing leg. Has anyone else seen this before? Is there a solution for it? Thanks in advance -- One day at a time, one second if that's what it takes

I have been discussing an asterisk solution with a company that has a custom written dialogic based solution. The issue is that their dialogic solution can read callerid from incoming calls, even if the callerid is blocked. I have read before that Asterisk can do this, and they want me to make sure that their new system will be able to do this. A quick poke around inside the zaptel source code

I can't seem to hide and/or set my caller ID from *. I'm using a quite recent (three weeks or so) CVS with an E400P card. I have pridialplan=unknown in zapata.conf and I'm based in the UK. The relevant bit of pri debug looks like this (reformatted to fit 80 char width): > Calling Number (len= 4) [ Ext: 0 > TON: Unknown Number Type (0) >

I have a 'time and attendance' application. Think janitorial or security kind of thing where an employee goes from location to location. They're supposed to 'clock in' when they get to a site using a phone at that site to prove they're there. Some employees have discovered 'fake caller ID' services can be used to say they're on site when they are not. How

Hey guys, I am having a strange problem with certain 800 numbers not working, specifically American Airlines 800-882-8880 800- 843-3000 800- 237-7976 and UPS 800-742-5877 I can't seem to figure out what is causing them not to pick up. Prior to using asterisk on our outbound PRI lines there was no problem. I tried explicitly setting callerid/ani etc on outbound calls, but so far no dice. Has