Caller ID should always be either ANI + CNAM (where available) on
inbound, or "anonymous" (No ANI).
If you are getting anything different from your Telco something is
wrong.
For SIP originated calls the CID is derived from the INVITE
Outbound caller ID is as you set it in your peer/user config. Name is
useless for calls handed to the PSTN over PRI or other digital TDM
interfaces since CNAM is looked up at the terminating end, not sent in
the signaling. Only the ANI is passed form you to the telco.
Unless you use 10 digit extensions, you have to specify callerid= for
each of your extensions.
If you are getting "asterisk" it is because the channels that
originated
the calls have no callerid= in their config
> -----Original Message-----
> From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-
> bounces@lists.digium.com] On Behalf Of Bruce Ferrell
> Sent: Friday, December 01, 2006 2:33 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: [asterisk-users] Interesting CALLERID behavior
>
> I've found an interesting behavior in callerid handling.
>
> I have very long callerid coming in or maybe just improperly combined
> information. In any case the result is that the caller ID is set to
> asterisk on the outgoing leg. Has anyone else seen this before? Is
> there a solution for it?
>
>
> Thanks in advance
>
> --
> One day at a time, one second if that's what it takes
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users