similar to: Attended transfer problems

Hi, I've noticed that if I have a multi-line linksys (942 or 962) phone with the same sip registration mapped to each line key, that if all the lines are full the phone will accept another call. I would expect the phone to respond with "busy" so the call would to directly to voicemail. Has anyone else experienced this and know of a workaround? I know it seems like an

Hi, In 1.6.1, it seems Attended Transfer do not behave exactly behave like Blind Transfer when transferer hangs up before callee answers : - in Blind Transfer, caller (ie transferee) is hearing Ringing tone when callee's phone is ringing - in Attended Transfer, caller (ie transferee) is hearing Music On Hold when callee's phone is ringing - in Attended Transfer, if callee don't answer

Hello, Sorry for a bit of a newbie post but we all had to start somewhere right .. I'm wondering if someone can briefly explain the difference between blind and attended transfers and why they would generate two very different CDR entries.? From my own research, it seems that transfers are both ultimately a SIP REFER and thus seeing two different CDR entries just confuses me further.

Howdy, Was there ever a fix for this? I have Trix 2.6 running asterisk 1.4 and have to set an extension with call-limit=1. However that user can no longer do attended transfers from Linkys 962 ip phone. Is there anyway around this? Cheers, Taff..

I'm using asterisk blind/attended transfer feature on a queue (also tried with sip phones feature), and both type of transfers work fine. The problem is that attended trasfers doesn't get logged to queue_log, but blind transfers are logged just fine. Anyone knows if this is the correct behavior? -- Regards, Miguel Paolino -------------- next part -------------- An HTML attachment was

Hi, I think I've identified an issue and just want to check before completing a bug report. Prior to a call entering a Queue, I set __DYNAMIC_FEATURES=NewRecordApp. AgentA answers and is able to use that feature code. If AgentA performs an attended transfer of a call from a queue to AgentB, the feature code no longer works. Cases that do work are as follows... Calls using both Queue() and

Hi folks, I have a simple question regarding attended transfers. I have some queues where agents take calls and I have configured attended transfers between queues. That is, the agent dials the attended transfer extension that routes it to the aproppiate transfer queue where the second agent answers and they both talk for a while. Finally the transferrer leaves the call with *, connecting

Hi all, I'm new posting here, though not to perusing. I'm having an issue with attended transfer and was wondering if anyone had heard of the problem/had any suggestions... Apologies in advance if this post is excessively newb-oid. - An incoming call C is passed to A, a POTS telephone connected via a Handytone 286 ATA. - A presses atxfer key, then dials B, a Win XP laptop running

There is plenty of information on the wiki for setting asterisk up for transferring calls both from the Dail() command, and features.conf. What really seems to be missing, is simply how do you actually perform the transfer? Blind transfers are pretty simple as you only have two obvious steps. How though do you do attended transfers? 1.) You have a call 2.) You dial *2 or whatever you have

I would like to know if atxfer is supported somehow because there seems to be little documentation for this feature. I know most people expect a good SIP/IAX phone to do the job but I think it's nice to be able to do attended trasnfers with a simple ATA-connected analog phone. I have Asterisk 1.2/Freepbx and features.conf has a line regarding atxfer and I set it to *2 (Default). While # works

Hello, I'm trying to find more information about this Remote Attended Transfers, as is explained in https://wiki.asterisk.org/wiki/display/AST/res_pjsip+Remote+Attended+Transfers for Asterisk 12 using pjsip stack Was Remote Attended Transfer implemented in previous versions of Asterisk (versions without PJSIP, Asterisk 11 and previous)? Where can I find configuration examples to do it work

Recently I asked a question about possibly unwanted calls due to extended transfer rights after attended transfers using DTMF sequences (http://lists.digium.com/pipermail/asterisk-users/2013-September/280536.html). Obviously, transferring with SIP INVITEs (hold + transfer keys) is not immediately affected by the this, but it is not always possible to enforce this. Meanwhile I have changed the

We have two Asterisk servers running CVS-HEAD (06/02/05 and 06/28/05). Most of our calls are either incoming or outgoing to external (PSTN or non-Asterisk) numbers, and only our internal users can initiate the transfer. Only half of the attended transfers work. It goes like this: 1)Extension 8123 calls number 19876543210 2)During the call, extension 8123 dials *2 to do an attended (non-blind)

Hi, I have been trying to enable attended transfer for callee. When the callee pressed *2, DTMF tone was heard by the caller. But when the caller pressed *2, attended transfer started. It's strange. I used two SIP phones. My Asterisk version is "Asterisk CVS-HEAD built by root@router on a i686 running Linux on 2005-06-27 06:07:18". In features.conf, I have: [featuremap]

Hi, I'm having problems with sip remote attended transfer using 2 asterisk boxes (same version, latest 1.4.X). Whenever I transfer from a call from box A to a call on box B, one call leg of the transferring phone is not disconnected (the one that is normally dropped by server side, phone disconnects the other one). The same situation works perfectly with local attended transfer. Is anyone

Can someone explain me attended transfer with Grandstream GXP-2000? Hitting TRNF button, I get: Dial number (BLIND) or Select line (ATTENDED) What's the exact meaning of 'Select line'? Thanks Mimmus

Hi I know that attended transfers are only available in the CVS Head. I downloaded the asterisk-update.sh script from voip-info.com and ran it with these parameters ./asterisk-update.sh update dev It looked as tho CVS HEAD was downloading and compiling, although it couldn't download the addons. However, now it's up and running, only blind transfers work with "#", and I

Hi, I've got attended (superivised) transfer working with a handful of SIP phones, connected via different ATA's to an Asterisk CVS-D2005.05.28.22.00.00-07/12/05-20:47:08. pingu*CLI> show features Feature Default Current ------- ------- ------- Pickup *8 *8 Blind Transfer # ** Attended Transfer

Hello, I downloaded asterisk 1.0.5, and the cvs version, and none of them has the attended transfer option (x and X). I see a patch here: http://bugs.digium.com/bug_view_page.php?bug_id=0002460 but this patch doesn't applies well in cvs version or 1.0.5. How can I make attended transfers work? It's a feature really needed :( Thanks in advance :) -- Paco Brufal

Hello List, I want to play an announcement for attended transfer calls. For example, "A" calls "B", "B" answers the call and transfers (attended) to "C" - once transfer is complete "B" should hear an announcement saying "you call has been transferred". Is there any configuration in asterisk to implement this behavior? I have not