similar to: SLA and Polycom

Has anyone had any success with getting SLA going between 2 SIP phones? (Particularly a set of Cisco 79xx's) The SLA document that comes with the asterisk source is about as clear as mud. Does anyone have a working sip.conf, sla.conf, and extensions.conf that I can use for reference? The part I'm most confused about is how to build the lines in sip.conf and how the phones should

I configured my sla.conf to use with a Polycom phone. I have no idea if I did it right, however, none of the console "sla" commands exist. Do I have to something special to compile in this support, or should it just work out of the box? ~jay

Greetings, Back in September someone asked about documentation for the new SLA feature in 1.4, however they received no replies. I thought I might ask the same question now in December. Apart from sla.conf.sample and a few comments in app_meetme.c I have been unable to find useful documentation. Is anyone using this feature right now? Is there a helpful source for information this highly

I understand that the Asterisk SLA implementation is somewhat different from most key systems and PBX systems. I also understand that in Asterisk, one does not put an SLA line on hold since it is just a MeetMe conference. However, is there any way to make the BLF flash when the answering party on the Asterisk system presses the hold key on their set and leaves the calling party alone in the

Hello, I am looking for a "real life" example of using SLA lines under Asterisk. I'll describe my environment and would like to know how I define it in Asterisk (version 1.4 final). Suppose I have two multi lines phones. The first phone has extension 1 assigned to it, and the second phone has extension 2 assigned to it. Now, I want extension 3 to be available on both phones as

On 8/7/07, raviprakash sunkara <sunkara.raviprakash.feb14 at gmail.com> wrote: > > Hello Russell, > Nice To meet U and Good Morning. I got u r mail-Id from > http://www.asterisk.org/node/48325 > Recently i started the SLA configuration. But i didn't understand the > Flow of its Functionality > One of the My Client Ask to have do deploySLA feature > He Using

Has anyone successfully gotten the features of sla.conf to work with Polycom phones? I would like to get 501's to show 3 shared lines on each of the keys. Particularly I am looking for a sample configuration for the phone, the Asterisk configuration seems simple enough. I've searched and searched and searched and have not found anything, general info about SLA yes, but nothing specific

Hello, every body Anyone set up, the sla sharing line appearances, in asterisk, I'm setting, tha but, don't, work, I change the sla.conf, extensions.conf, and sip.cfg, but don't work fine. Any one, could setup, tha? Regards Carlos Rojas -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi. I've been researching very deep into SLA in Asterisk 1.4, and am unclear as to if the feature exist. I know the commands and configs are available, but there is no documentation, and I've heard that it will not be supported until 1.4.1. Does anyone have a definitive answer on this? If it is available, is there any documentation on the feature? -Chris

Hello, do you know if it is possible to define the SLA configuration in the database for realtime usage with asterisk? Leandro -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20141114/7c4f09a4/attachment.html>

Size: - one location - 15 IP Phones ( 1 dect) - Create new voip trunk (current are ISDN) (30 number block) - LTS is important - an SLA is optional at the moment there is no one On 11.12.2017 22:31, Ron Wheeler wrote: > You might want to add some details > - size of the project > ?-- number of locations > ?-- number of extensions > - are you converting your trunks? > - what are

If SLA supports IP trunks, can shared extension appearance be achieved using a local SIP trunk in place of an extension? Basically, I'm trying to allow some stations (Polycom IP 650) to have a shared extension amongst all of them. Ideally, I'd like for the LED to show if that extension is in use, and I'd like for the extension to ring all stations on that extension when a call comes

JR Richardson Engineering for the Masses> -----Original Message----- > From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users- > bounces at lists.digium.com] On Behalf Of asterisk-users- > request at lists.digium.com > Sent: Saturday, March 01, 2008 12:00 PM > To: asterisk-users at lists.digium.com > Subject: asterisk-users Digest, Vol 44, Issue 1 > >

Anyone have shared lines (sla.conf) working with Polycom phones? Also, has anyone figured out if its possible to do 1 button call park with the softkeys?

Hi All. I've been experimenting with SLA on Asterisk 1.4.13 (patched up to 1.4.14). I am using a SIP channel for my "trunk" line. On the whole things are good, but I have noticed that if I misdial an outgoing call, i.e. I get 404 "Not Found" in the SIP trace, then the trunk line just drops, rather than presenting an error tone or message to the user.

Hi ?? I have been trying for several days get 3 Cisco spa508g phones (firmware 7.5.5) to work with asterisk 11.6 cert1 and sla. I can get the phones to all ring when an incoming call arrives, and I see the slatrunk working. However the blf function does not work. If one extension picks up the call the others do not show the trunk in use.? And as you might expect the hold and outbound dialing does

Fellow asterisk users, I am trying to get Single Line Appearance functionality working on a set of Linksys SPA942 phones and have not been successful. It looks like sla.conf is not getting read, only one phone reads as registered for the shared line, and a busy tone every time the shared extension is dialed. I have followed the documentation [1] and followed through other threads I saw

I have read that 1.4 has shared line appearances, which I assume will work with Polycom phones. Has anyone configured this and verified it working? I was going to start playing around with it but wanted to see if anyone else has tackled it yet. Bill -------------- next part -------------- An HTML attachment was scrubbed... URL:

In the real world (or at least in my world) we use undersubscribed internet connections that come with a service level agreement (SLA) that guarantees that the jitter, delay, and packet loss with be within defined parameters in the service agreement. With most DSL and Cable you will not get a SLA, with the cheapest T1s you might get one, but the only penalty to the ISP if they do not meet is a

I'm trying to record all calls including calls that are part of a SLA. Using both monitor and mixmonitor the recording appears to happen (that is, asterisk logging shows it happening) however the file is never written to. It doesn't seem to be possible to use the recording that is part of the meetme app because when the SLA app creates the conference it passes NULL in the options field