asterisk users - Mar 2014 - cisco spa phones and sal

Hi
?? I have been trying for several days get 3 Cisco spa508g phones
(firmware 7.5.5) to work with asterisk 11.6 cert1 and sla. I can get
the phones to all ring when an incoming call arrives, and I see the
slatrunk working. However the blf function does not work. If one
extension picks up the call the others do not show the trunk in use.?
And as you might expect the hold and outbound dialing does not work. I
do not think the problem is with the sla config on asterisk, but
rather the setup in the phone. Does anyone have an example config for
the spa phones.

Thanks

Kelly

-------------------------
Email sent using Atmail - Email, Groupware and Calendaring done right.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20140302/7076d4d1/attachment.html>

One quickie that usually gets me:

On the ?Attendant Console? tab, there is a ?Server Type? setting in the General
section that defaults to Broadcom.  This needs to be changed to Asterisk for ANY
BLF on the phone to work (regardless of whether or not you?re doing BLF on the
phone itself or via an attendant console).  This tab is only accessible within
the /admin/advanced web interface, or you can use the <Server_Type>
configuration option within the pseudo-XML config files, if you?re doing auto
provisioning.

Noah Engelberth
MetaLINK Technologies

From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces
at lists.digium.com] On Behalf Of kelly at ncwcom.com
Sent: Sunday, March 02, 2014 12:04 PM
To: asterisk-users at lists.digium.com
Subject: [asterisk-users] cisco spa phones and sal

Hi
   I have been trying for several days get 3 Cisco spa508g phones (firmware
7.5.5) to work with asterisk 11.6 cert1 and sla. I can get the phones to all
ring when an incoming call arrives, and I see the slatrunk working. However the
blf function does not work. If one extension picks up the call the others do not
show the trunk in use.  And as you might expect the hold and outbound dialing
does not work. I do not think the problem is with the sla config on asterisk,
but rather the setup in the phone. Does anyone have an example config for the
spa phones.

Thanks

Kelly
________________________________
Email sent using Atmail - Email, Groupware and Calendaring done right.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20140302/4268be29/attachment.html>