similar to: SIP host=dynamic help needed for CCME

Hi, I'm having trouble getting asterisk to report MWI to a Cisco CCME. I record a message in mailbox 29, but the subsequent MWI notifications I see continue to report no messages waiting. Are they reporting for the wrong mailbox? Is there some other option I have to set or change? I'm running asterisk-1.4.22 Since the mailbox is in [home] in voicemail.conf, I've tried things like

I am starting to work on a similar solution, but with full call manager rather than CME. I am going to use Asterisk to accept POTS calls through PCI FXO ports (winmodems) and then forward the calls through to call manager via SIP. I don't have my FXO cards yet (waiting for UPS man!!) but I have * talking to the CM through SIP just fine. I am testing with the Cisco softphone, connected as a

I have the following configuration and am obviously missing something small that is causing * not to work as expected. I have the following defined in sip.conf [ccme-in] type=peer host=10.0.9.1 context=devel_in disallow=all allow=alaw nat=no canreinvite=yes qualify=yes and [devel_in] is defined in extentions.conf However when I try to call via the dial peer I have configured on the cisco

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi folks, I would create a structure like this: external sip server \ external sip server |-----| Asterisk |------| Cisco CME |-------| ip phones | external sip server / I would use Asterisk as SIP client for some SIP accounts on external servers ... then register those via H323 (if possible; skynny?) on Cisco CME ... Then I would use Asterisk

We're having an issue with connecting a Cisco ITS installation to * such that DTMF tones are passed to *. DTMF tones aren't passed to voicemail or to any of the interfaces behind *. On the Cisco Side: dial-peer voice 8 voip destination-pattern 9999$ session protocol sipv2 session target ipv4:172.16.1.249 session transport udp dtmf-relay rtp-nte codec g711ulaw no vad We have also

First, the scenarios: Call placed from Boston to locally configured Asterisk Meetme extension: Cisco 7941 <-SCCP-> Cisco 2821(CME,Boston) <-SIP-> Asterisk(Boston) Call placed from Boston to European Asterisk Meetme extension: Cisco 7941 <-SCCP-> Cisco 2821(CME,Boston) <-SIP-> Cisco 2821(CME,Europe) <-SIP-> Asterisk(Boston) In the 1st scenario, everything works

I found with some more testing that you have to setup a 5 digit number (or something longer than your phone extensions) to make the voicemail work. Now the trick is making the MWI work. Rick -----Original Message----- From: Lull, Rick Sent: Friday, July 15, 2005 3:55 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: VM on * for CME Install Hi folks- I've

Hi folks- I've got to the point of trying to configure voice mail on the * box for the SCCP/CME phones. The phone can call the voicemail number (8500) and I can hear Allison's voice. Attempts to punch in a voicemail box number or password don't seem to register; keypad presses don't seem to be heard by the * box. The CME configuration has the 'dtmf-relay rtp-nte' command

Hi i test a new equipment on my backbone: a Cisco AS5300 with voice dsp ressource connected at a E1 Voice Link. I want that all call incoming on the cisco 5300 are sent to Asterisk and all Asterisk outgoing call are sent to Cisco AS5300. Actually, i configure the AS5300: isdn switch-type primary-net5 ! voice service voip sip ! voice class codec 400 codec preference 1 g711alaw codec

Hi. If I use a Cisco as a PSTN termination GW and need to route all incoming isdn calls to my asterisk and all outgoing calls from asterisk via the cisco out to pstn, how do I do that ? in the cisco I have this: dial-peer voice 1 pots destination-pattern [0-9]T no digit-strip direct-inward-dial port 3/0:D ! dial-peer voice 50 voip destination-pattern [0-9] voice-class codec 1 session

I have cisco phones running SCCP, and a cisco 2600 with FXO I'm using for PSTN access. I can dial out, but inbound calls are not ringing a phone. Please see my config In the 2600 I'm PLAR'ing the line and I have a SIP Dial-Peer for 4001 voice-port 1/1/0 output attenuation 0 echo-cancel coverage 32 no comfort-noise timing hookflash-out 50 connection plar opx 4001

Hello, Has anyone experienced a segmentation fault in asterisk for using G729 against an AS5300 in SIP ? I'm having this problem. Also, any other codec I use gives me incompatible media (can be read in SIP DEBUG messages). AS5300 configured for multiple codecs, so is Asterisk. Tried G711u/A G723 and G.729. Any clues ? Regards, Jorge A. Info: Asterisk ver 1.0.7 stable Using AMPortal

I have a smartnet contract for this phone, and have searched high and low for this file on the Cisco website. I need: United_States/7960-tones.xml English_United_States/7960-font.xml Every road seems to lead to the Call manager express downloads... I don't have a CME, so that's basically useles. Can anyone point me in the right direction? Mikel

I would think I could do this but for some reason I am stymied. I have a PRI from RCN connected to a cisco 3640 (in my day "cisco" is all lower case :-)). My config looks something like this on the cisco... --------------------------------------------------------- voice-card 3 dsp services dspfarm ! ip cef ! isdn switch-type primary-5ess ! controller T1 3/0 framing esf linecode

HI, I have been pulling my hair out trying to get a Cisco MC3810 to interface my Asterisk box with a T1. I am able to make outgoing calls but incoing calls never reach my Asterisk box. The cisco give a fast busy when I try to call one of the DID's. When playing around with the dial-peers I can get the cisco to pick up the call, but then it forwards the call back to the ANI that is dialing.

Hi, this is the second time that i post this, may be a wasnt clear the first time. Im having problems with an incoming peer after i upgraded asterisk from 1.0 to 1.2.4, in 1.0 i used to configure the incoming peers like this: register => @prepago-in [prepago-in] type=friend host=192.168.10.102 ; this is the cisco's ip context = from-external dtmfmode=rfc2833 insecure=very ; required for

Hello, We have been working with the ReceiveFax application for some weeks now in order to receive faxes in T.38 and it works fairly well, but there are some faxes that for some reason we are not able to receive correctly. The asterisk version we are using is 1.6.0.6 with spandsp-0.0.5pre4 and the asterisk machine is behind a CISCO mediaGW to be able to communicate with the PSTN. The SIP call

All, I need to run this by everyone and see if someone has any idea's. I have a asterisk server setup and currently am receiving the inbound calling number where the name should be. My setup is.... One pri terminating into a Cisco 2431 router Sip messages from the Cisco get sent to a asterisk server linksys ata's a each remote end. I can receive the calling name if the call originates

More top posting goodness... Please post your updated dialplan. After making the change, did you reload/restart Asterisk so the changes would take effect? --Tim ----- "Mohit Saxena" <MohitS at starcomms.com> wrote: > Still no luck.... > > Br, > Mohit > > -----Original Message----- > From: asterisk-users-bounces at lists.digium.com >

Hi All, I'm just posting this questions to both forums as its related to both. In hope to get some help on below issue: Asterisk 1.4.x CCM = 4.x CME = 4.x codec = g711ulaw Here is my setup: 600X Phones ----> Asterisk ---- SIP Trunk ----> Call Manager -----> CME -----> 461X Phones 461X Phones ----> CME -----> my dial peer points to Asterisk IP for 600X Phones so in