similar to: MeetMe echo problems with more than two participants

Hi! I'm building an application which allows to dial via the Asterisk Manager Interface using the originate command. There should be an optional conferencing feature. The manager commands are basically: --------------------------------- action: login username: sdjklgdsjg secret: xxx events: on action: originate callerid: 3847438609 priority: 1 exten: 4068439865 async: 1 context: out

Hi All, Does any one know of a way to make a three way call from Asterisk using X-Lite. I need the ability to be able to call someone on the PSTN using my IAX provider then bring another person from a local extension into the call if needs be? I believe most three way calling is done using a feature of the phone, and X-Lite doesn't look like it supports this. Can this be

Hello, When I receive a call to my CounterPath Bria from Asterisk 1.4.18.1 and I place the call on hold, the call is dropped after 30 seconds. It looks like there is no RTCP/RTP sent to the client from Asterisk while on hold (music on hold playing to caller) thus client disconnects the call. During this time, I get the following messages in the CLI: NOTICE[24194] rtp.c: Unknown RTP codec 126

The Asterisk.org development team has released four new versions of Asterisk to address critical security vulnerabilities. AST-2008-002 details two buffer overflows that were discovered in RTP codec payload type handling. * http://downloads.digium.com/pub/security/AST-2008-002.pdf * All users of SIP in Asterisk 1.4 and 1.6 are affected. AST-2008-003 details a vulnerability which allows an

The Asterisk.org development team has released four new versions of Asterisk to address critical security vulnerabilities. AST-2008-002 details two buffer overflows that were discovered in RTP codec payload type handling. * http://downloads.digium.com/pub/security/AST-2008-002.pdf * All users of SIP in Asterisk 1.4 and 1.6 are affected. AST-2008-003 details a vulnerability which allows an

Hi All, Today I faced a problem with channels getting stuck. We use asterisk 1.4.18.1, and there were 2 extensions (channels) that got stuck. When I try to do "soft hangup <channel>", it says "Requested for soft hangup" for that channel, but if we go and check once again those channels are still stuck. Also even after asterisk restart it did'nt go, finally we had to

I have a P3-800 with two IDE drives in a software RAID1 configuration. Each drive is on a separate IDE channel. Now anytime there is HD activity, I hear "beeps" and "cutting out" on a call using the X100P card. I ran the zttest program, and discovered HD activity would drop the accuracy down to between 2% and 50%. However I noticed if I disabled one drive in the RAID1

I have patched astcc.agi with the HUP patch, but it still hangs from time to time. Asterisk SVN-branch-1.2-r25165M built by root @ vpbx on a x86_64 running Linux on 2006-05-07 00:31:09 UTC bye Ronald

Hi list! I'm trying to setup a new * server with a TE210P in a Dell 2850 box. I'm using zaptel version 1.2.5, the linux flavour I'm using is CentOS 4. In a previous thread I read about the results I should expect from zttest. On my home box (using the crappy Asus A7V600) I got really bad results from zttest (just over 97.5) but I know that this motherboard just sucks. To my

I was browsing the applications developed in zaptel and came across zttest. After I run it, I get the following: Opened pseudo zap interface, measuring accuracy... 99.975586% 99.987793% 99.987793% 99.987793% 99.987793% 100.000000% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.975586% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793%

Hello, Today we setted up a server that needs to use MeetMe but doesn't have any Zap hardware. So we need to use ztdummy (at least, this was our idea). Rarely: zttest is not working at all (100% bad, using zttest -v doesn't give anything, etc.). Of course, after load ztdummy, there isn't any background or anything. It is the same kernel (Debian Etch default kernel, 2.6.18) than

Came upon a problem today that I thought I'd see if it's by design, if I'm missing an option somewhere, or if my fix is the way to fix it. We setup a remote location with a server, same as we've done with others, but for some reason when they would transfer an outside call anywhere it would pause for a few seconds and hang up the line. Well, after spending most of the day on

Guys. I have an issue with a te110p card and also some tdm04b cards on the same system: Zttest returns this for the tdm04b cards: [root@mollendo ~]# /usr/src/zaptel-1.2.4/zttest 38 -v Opened pseudo zap interface, measuring accuracy... 8192 samples in 8191 sample intervals 99.987793% 8192 samples in 8192 sample intervals 100.000000% 8192 samples in 8192 sample intervals 100.000000% 8192 samples

Hi I am trying to build reliable fax solution with asterisk, iaxmodem and hylafax. I am attempting to do this on Compaq DL-360 with 2 pentium 3 1.2GHz (512 cache) and 2GB of RAM. I am using a Sangoma A101. After installing the newest zaptel and wanpipe-3.1.0 beta I did zttest and it didn't give me good results: 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586%

Hi, Asterisk got stopped this morning after 20 minutes and phones went to 'No Service' and then got started automatically after 20 min, as I could see in the full log that asterisk got started at so and so time: [Feb 10 08:29:31] VERBOSE[31013] logger.c: Asterisk Event Logger Started /var/log/asterisk/event_log [Feb 10 08:29:31] VERBOSE[31013] logger.c: Asterisk Dynamic Loader Starting:

Hello, I have some ugly numbers given by zttest for ztdummy on an AMD64 box running linux-2.6.15 compiled for Athlon64. linux-2.6.15, zaptel/branches/1.2 r900, jiffies ./zttest Opened pseudo zap interface, measuring accuracy... 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586%

Another request make me test my t1 card, which has no quality problems, but all that I get is: [root@SIP2-MI zaptel-1.2.1]# ./zttest Opened pseudo zap interface, measuring accuracy... 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793%

Hi Francois, Thank you for your interest. I tried the card alone so I don't think is an IRQ problem (anyway is there a way to be sure?) To be sincere, in all systems I saw (even working ones) there is an IRQ balance failed where Linux boots. The system is new, I tried different processors (P4 and Celeron) with SMP kernel and without. The card has the echo module, could not be

Friends, I'm having severe problems with zaptel timers on Intel Dual Core systems with SMP code enabled. Ztdummy, zaptel connected to Digium TDM or PRI cards - all ends up with large timer probems - zttest going down to 50% accuracy on some systems, even to -1 on ztdummy systems and voice quality is no more. A restart is the only way to get back to a working system. We're only

We have two Linksys 942 phones which sound great when they call each other directly through Asterisk. But when they both dial in to a meetme conference room, the sound is very jittery. Other phones like Polycom 501 and Snom 360 sound fine when using meetme. Both Linksys phones are set to use the default g711u (ulaw) codecs. Adjusting the jitter buffer and jitter level settings to various values