similar to: Call Pickup (*8) / Attended forward and CallerID

Hi Folks, I am running a SPA-3000 behind a legacy PABX on an analog line. I have been able to set up a dial plan that sends outgoing calls out to the appropriate VSP depending on prefix, and that part and the incoming call handling works fine. I am now trying to implement call pickup (dial 6*) or manual call forwarding (flash, dial extension). On the first of these I have worked out how to get

I'm having an issue with CDR. Basically, I expect to have all "legs" of a call having the same linkedid and differing only by the sequence value. That does happen, but I'm getting null dst values after doing an attended transfer. I'm not sure if this is a bug or I'm doing something wrong. I'm running Asterisk 13.2.0. Here's the console log, step by step: First,

Nik Engel wrote: > Hi list ! > > I implemented *8 to pickup any call on my asterisk system. But after the > pickup callerid is missing, so there is no way to see from where the > call originated. How can this callerid be passed on. > > Nik > Hi Nik, I'm after the same question as I would like to keep callerID data after pickuping up the call. Maybe using a

Hi, I've been experiencing trouble with my DAHDI channels for some time and have finally decided to try and resolve the issue. Essentially, the problem I am having is that when a call comes in, and my DAHDI phones therefore ring, Asterisk thinks that one of the handsets has picked up to answer the incoming call - whereas in actual fact it is still on hook. The call then gets instantly

Hello I have a Junghanns ISDN BRI card for incoming calls and use SIP Polycom IP300 phones. My config files look like this: features.conf pickupextn = *8 zapata.conf context=frompstnisdn group=1 callgroup=1 pickupgroup=1 I also edited sip.conf like this: group=1 callgroup=1 pickupgroup=1 But on internal and incoming calls if I dial *8 from any phone I cannot pickup. Do I need to add

Hello, I am testing the Openstage phones from Siemens but I can not find a solution on how to update the caller-id after a successful attended transfer. Of course, I mean an attended transfer by using the phones functionality, not something defined in asterisks features.conf. Any idea on how to achieve this, or any technical document from Siemens on on how this is support to work would help.

Hi, Last night I could dial *8 and pickup a call that was ringing to another phone. This morning, I searched on the Web for a solution to mixed up digits when dialing on a Polycom Soundpoint 501. I found that if you go to the SIP page on the phone's >Web interface and change the "Digitmap Impossible Match" setting from "0" to "2" that fixes the mixed up/eaten

Hi folks, I have a simple question regarding attended transfers. I have some queues where agents take calls and I have configured attended transfers between queues. That is, the agent dials the attended transfer extension that routes it to the aproppiate transfer queue where the second agent answers and they both talk for a while. Finally the transferrer leaves the call with *, connecting

I've searched for a few days now without finding an answer. The release notes for version 1.0.5.16 of the Grandstream firmware says it supports attended transfer using replace but the docs haven't been updated so I can't work out how to enable it, or whether it should Just Work. I'm currently using the # attended transfer patch for * but would like to get back to using the

Hi, I'm using the Pickup() application for direct call pickup having the following line in the dialplan: exten => _*88XX,1,Pickup(${EXTEN:2}) It works OK, though I would like to have to get the original caller ID number forwarded to the phone where I do the pickup and have it displayed during the call. Currently the string *88xx remains on the screen of the phone I do the pickup. It

Hi, I've got attended (superivised) transfer working with a handful of SIP phones, connected via different ATA's to an Asterisk CVS-D2005.05.28.22.00.00-07/12/05-20:47:08. pingu*CLI> show features Feature Default Current ------- ------- ------- Pickup *8 *8 Blind Transfer # ** Attended Transfer

Hi to all, i already searched the archive without finding a solution to my problem. I have asterisk installation 1.2.18 to support multiple virtiual PBXs. I use SIP peer in the format <ID>-<EXT> to let every virtual PBX to share the same numbers of EXT. Ex. (PBX ID 10 Extensions) 10-101 10-102 10-103 (PBX ID 20 Extensions) 20-101 20-102 20-103 I use some rules in the dialplan to

I have a pretty standard setup with Asterisk acting as a PABX for a bunch of SIP handsets (in this case, SwissVoice IP10S). My users are complaining that when they forward their phones to their cellphones on unavailable (i.e. forward when no-answer), their cellphone only rings once or twice, and then Asterisk sends the call through to Voicemail. I'm using the standard extension Macro

I have a setup where there are occasional problems with attended transfers. I have already checked the devices as well as the relevant DTMF modes (SIP INFO and rfc2833). I could not find any problems here. The setup is a follows: The front desk (F) accepts calls from customers (C). In some cases F needs to transfer C to a specific department (D). If D cannot handle the problem, D tries to

Hi, During an attended transfer using the SIP phone feature buttons, I'm getting a few complaints from recipients that they can't tell when the call they are receiving has been transferred. Is there any way (even if it's complicated) to generate a beep tone to the recipient of the transferred call when the transfer is completed? I know you can do this with DTMF codes but they want to

Hello. I have this issue, when I pickup a call that is ringing in a SIP Phone, it keeps ringing. There is bug #116 that mention something about these, but it does not seem to be resolved , at least, not yet. Anybody else has seen it behavior ? Thank's.

Hello, using Asterisk 1.8.12.2 case : I call with my cellphone to our public telephone number Our receptionist answers the incoming call and does an attended transfer to my colleague ( A ) Colleague answers and the receptionist tells him that I am on the other side. Receptionist transfers the call and I am connected to my colleague ( B ) My question is about the CallerID that the

Hello, I'm researching the possibility of using VOIP (SIP) with an existing PABX system. Ideally, the setup would be to dial an outside line through the PABX (that would actually link to the the VOIP gateway). At this point I would prefer not to purchase a hardware-based VOIP gateway. I would prefer to use a software-based gateway for research & testing purposes. Could anyone please

i have TB instaled and i cant get call pickup when another phone rings i tried ** , *8 , *8# , **+ext but nothing seems to be ok.on extention menu i put call pickup=1 and call group=1 but nothing look at my features.conf; ; Sample Parking configuration ; [general] ; do not manually enter parkinglot config information, use the parkinglot module ; ; the parking_additional.inc file is

I am probably just being stupid again, but... I have some non-SIP phones which are set up for doing transfers by DTMF, by simply adding T or t to the appropriate Dial options. This works quite well in general. They can also do non-directed call pickup with *8. However, after a call pickup they can't transfer the call by DTMF -- there is no Dial command where I can add the t or T option. How