similar to: How does IMAP notify Asterisk that I've read a message?

I purchased an Intel D945GNT motherboard and it comes in the BIOS with an option to create a RAID 0 or RAID 1 volumes using my existing two SATA disks. However when installing Centos 4.3 x86_64 I see the the installer recognices the two drives and does not "see" the RAID 0. Is that ok? Should I disable the RAID in the BIOS and then go for a LVM+RAID 0 setup in the installer ? Since it

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I have Asterisk sitting between the PSTN and a legacy PBX. Asterisk is doing some IVR work prior to forwarding calls to the PBX and it also acts as the voice mail server for the PBX, with Asterisk configured for IMAP storage. When a call comes in and the caller leaves a voice mail, the VoiceMail application calls the program configured in

1.6 UPGRADE.txt: > * If you use any interface for modifying voicemail aside from the built in > dialplan applications, then the option "pollmailboxes" *must* be set in > voicemail.conf for message waiting indication (MWI) to work properly. This > is because Voicemail notification is now event based instead of polling > based. The channel drivers are no longer

I've configured asterisk 1.4 to use imap storage for voice-mail and while I'm happy with it generally speaking it really seem to hammer the IMAP server. It appear, from the IMAP server logs that it's polling the imap server every *second* for mailbox updates for the users' voice-mail folders. Is it really necessary to do this once a second? Is this tunable anywhere? Thanx, b.

ok this is a wired problem. when i use X-Lite - after i register with asterisk X-lite sends a subscribe/notify request to asterisk to determine if the account has any messages waiting. if i create a sip.conf account using: user 12345 with a voicemail box 12345 - MWI works user jwolosuk with a voicemail box 12345 MWI fails (gets a 404 not found upon a subscribe) does anyone have a clue why

Hi ALL, After upgrade 1.8 my MWI wasn't working I do have setting in voicemail.conf. Do i need to do anything else to fix my MWI on polycom 501 ? It was working with 1.2 asterisk. pollmailboxes=yes -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110608/e1f59a92/attachment.htm>

I am using mysql sipfriends and can't seem to get the MWI to work. From what I've read it seems this is not supported with that dynamic system, and probably never will be. I was thinking of just setting a cron job or something to check every minute for voicemail and set our sip NOTIFY messages as needed. Also, the PAP2-NA has the ability to reboot via a sip notify and I would like to be

On 27.12.18 at 18:14 Joshua C. Colp wrote: > On Thu, Dec 27, 2018, at 1:07 PM, Michael Maier wrote: >> Hi! >> >> I just want to say, that 13.24.1 doesn't fix the problem described in >> the posts above. > > You're going to need to file an issue[1] with traces and actual configuration. > > [1] https://issues.asterisk.org/jira > Before I'm

We've had several customers report since upgrading them to our new Asterisk 1.6.2.17 server (from version 1.4), that their MWI no longer works. No significant changes have been made to their SIP configuration, nor to their ATA configuration. While not exhaustive, these are the ATAs that don't work: Linksys SPA2102 Linksys PAP2T-3.1.15 Thomson 780 Thomson 784 Unfortunately, this

I'm trying to make the MWI indicators on my client's Vodavi Starplus DHS phones work. The actual signalling - in-band DTMF from the ZAP interfaces directly to the PBX system - works fine. I can manually tell asterisk to send "#9610" as DTMF and voila, the MWI on extension 10 lights (or goes out.) The question is, how is this integrated with voicemail, i.e. so that the MWI

I remember seeing something like this on the list a while ago, but I'm darned if I can find it. We have a number of Polycom IP501 phones, some of which have more than one registration on them. When a voicemail is left for a phone with only one registration, the MWI lights up and stays lit until the voicemail is listened to. However, on our phones with more than one registration, the MWI

Hi folks, To provide MWI, * will send out a sip:notify message to the UA. The originator of this message is asterisk, as shown below; NOTIFY sip:1001@www.mysipproxy.com:5065 SIP/2.0 Via: SIP/2.0/UDP 66.121.xxx.yyy:5060;branch=z9hG4bK0466cb21 From: "asterisk" <sip:asterisk@66.121.xxx.yyy>;tag=as0ffb1bdc <=============== To: <sip:1001@www.mysipproxy.com:5065> Contact:

Hi, I'm having trouble getting asterisk to report MWI to a Cisco CCME. I record a message in mailbox 29, but the subsequent MWI notifications I see continue to report no messages waiting. Are they reporting for the wrong mailbox? Is there some other option I have to set or change? I'm running asterisk-1.4.22 Since the mailbox is in [home] in voicemail.conf, I've tried things like

Hello, I get warnings in my asterisk log: chan_sip.c:694 retrans_pkt: Maximum retries exceeded on call. I've used sip debugging to figure out the cause. It's my D-link DVG-1120S that don't understand message-summary events that asterisk sends out for MWI indication to the client. Is there any way to disable this in asterisk for this particular client? Tanks in advance, Magnus

I think I have my echo problem solved, now i need to tackle the MWI. I can't seem to get it to light up. I'm using Asterisk 1.4.14. Here's a section from my sip.conf for my test phone: [general] context=internal allowguest=no allowoverlap=no allowtransfer=yes notifyhold=yes bindport=5060 bindaddr=0.0.0.0 srvlookup=yes pedantic=yes vmexten=9998 at internal ;vmexten=*97

Hello. I am using a snom 320 running 5.3.6 with Asterisk 1.2.4. In the sip.conf entry, I have mailbox=1234@default and vmexten=*98. The light on the snom 320 turns on when I have voicemail and the retrieve button dials the correct extensions. However, the light turns off immediately after making the call to voicemail, even if I do not check the voicemail. Any idea on how to get this to behave

I have an application where we receive calls on an inbound PRI. After hours, our Asterisk box dials our answering service on an outbound PRI and then bridges the caller to the answering service. The flow looks like this: (CALLER)INBOUND_PRI --> CONTEXT --> GOSUB(Incoming) --> GOSUB(bridge-to-anssrv) --> DIAL(answering_service) --> OUTBOUND_PRI(service) This has been working

While I know this is not a true asterisk problem, I figure someone where may know. When you click on Messages and it gives you the count of Urgent, New, etc. How can you make the phone gather that information? For example, my phone shows me there is an e-mail. It also sends an e-mail. Yet, when I click on message before I connect to the contact center, it doesn't have any counts. Here is

Well, I have been busy getting child #4 off on her way to college (joining #2). So now it is quite with just the 2 youngest and I can get work done again!. tar stops as follows: /root/.nautilus/metafiles/x-nautilus-desktop:%2F%2F52F.xml tar: Error exit delayed from previous errors. I thought perhaps this is some file locked becuase I was running from a terminal session in gnome. So I

Hi All - I'm running version SIP version 1.3.4 on various IP300, IP500, and IP600 Polycom phones. I'm having a tough time with MWI. I thought I remembered somebody on the list saying that they had it working, but I can't find it in the archives now. I have all the phones configured for MWI as specified in the WIKI: ipdmid.cfg: up.oneTouchVoiceMail="1"