Hi folks, To provide MWI, * will send out a sip:notify message to the UA. The originator of this message is asterisk, as shown below; NOTIFY sip:1001@www.mysipproxy.com:5065 SIP/2.0 Via: SIP/2.0/UDP 66.121.xxx.yyy:5060;branch=z9hG4bK0466cb21 From: "asterisk" <sip:asterisk@66.121.xxx.yyy>;tag=as0ffb1bdc <==============To: <sip:1001@www.mysipproxy.com:5065> Contact: <sip:asterisk@66.121.xxx.yyy> Call-ID: 6fa70c151dce64a339367cc2612c9f87@66.121.xxx.yyy CSeq: 102 NOTIFY User-Agent: Asterisk PBX Event: message-summary Content-Type: application/simple-message-summary Content-Length: 38 Messages-Waiting: yes Voicemail: 4/11 Is there a way that I can change this 'originator' to a numeric value ? Cheers SW
At 12:29 AM -0800 12/13/03, SW wrote:>Hi folks, > >To provide MWI, * will send out a sip:notify message to the UA. > >The originator of this message is asterisk, as shown below; > >NOTIFY sip:1001@www.mysipproxy.com:5065 SIP/2.0 >Via: SIP/2.0/UDP 66.121.xxx.yyy:5060;branch=z9hG4bK0466cb21 >From: "asterisk" <sip:asterisk@66.121.xxx.yyy>;tag=as0ffb1bdc ><==============>To: <sip:1001@www.mysipproxy.com:5065> >Contact: <sip:asterisk@66.121.xxx.yyy> >Call-ID: 6fa70c151dce64a339367cc2612c9f87@66.121.xxx.yyy >CSeq: 102 NOTIFY >User-Agent: Asterisk PBX >Event: message-summary >Content-Type: application/simple-message-summary >Content-Length: 38 > >Messages-Waiting: yes >Voicemail: 4/11 > >Is there a way that I can change this 'originator' to a numeric value ? > >Cheers > >SWSW - See the below conversation from April regarding the same topic. I don't think this became a patch or made it into CVS. JT At 7:59 PM -0500 4/27/03, Mark Spencer wrote:> >Sounds like the SNOM expects to use our "Contact" to get a hold of us. It >should be simple to add something like "voicemail=<foo>" in the general >section for setting the voicemail extension to use in the contact area. > >Mark > >On Thu, 24 Apr 2003, WipeOut . wrote: > >> Here is the trace if anyone is interested.. >> >> NOTIFY sip:1235@192.168.1.25 SIP/2.0 > > Via: SIP/2.0/UDP 192.168.1.200:5060;branch=z9hG4bK523b1b63 >> From: "asterisk" <sip:asterisk@192.168.1.200>;tag=as3da6a846 >> To: <sip:1235@192.168.1.25> >> Contact: <sip:asterisk@192.168.1.200> >> Call-ID: 35f9e3663d4a38f662f613506ef0ad3e@192.168.1.200 >> CSeq: 102 NOTIFY >> User-Agent: Asterisk PBX >> Event: message-summary >> Content-Type: application/simple-message-summary >> Content-Length: 36 >> >> Message-Waiting: yes >> Voicemail: 1/0 >> >> >> > Hi, >> > >> > The MWI is working on the SNOM 200 but the problem is that when >>you press the MWI button it attempts to dial >> > "asterisk" <sip:asterisk@192.168.1.200> >> > where 192.168.1.200 is the IP address of my * box. >> > >> > How can I modify this so the return path is correct, which on my >>setup is extension 8500 for voicmailmain?? >> > > > > Thanks
Thanks, John. My requirement here is little different. I am using * as a Voice Mail server for Vocal ((in addition It does codec conversion and routing to PSTN/SIP and PSTN/H323). Thing is Vocal doesn't seems to like the Notify message coming from user "asterisk". If I can modify this I will have * seamlessly providing full capabilities of voice mail to Vocal . I can't find a way to get the VMWI to pass through to a SIP client of Vocal. Cheers SW ====================================Message: 6 Date: Sun, 14 Dec 2003 13:33:09 -0500 To: asterisk-users@lists.digium.com From: John Todd <jtodd@loligo.com> Subject: Re: [Asterisk-Users] voice mail - sip:notify message Reply-To: asterisk-users@lists.digium.com At 12:29 AM -0800 12/13/03, SW wrote:>Hi folks, > >To provide MWI, * will send out a sip:notify message to the UA. > >The originator of this message is asterisk, as shown below; > >NOTIFY sip:1001@www.mysipproxy.com:5065 SIP/2.0 >Via: SIP/2.0/UDP 66.121.xxx.yyy:5060;branch=z9hG4bK0466cb21 >From: "asterisk" <sip:asterisk@66.121.xxx.yyy>;tag=as0ffb1bdc ><==============>To: <sip:1001@www.mysipproxy.com:5065> >Contact: <sip:asterisk@66.121.xxx.yyy> >Call-ID: 6fa70c151dce64a339367cc2612c9f87@66.121.xxx.yyy >CSeq: 102 NOTIFY >User-Agent: Asterisk PBX >Event: message-summary >Content-Type: application/simple-message-summary >Content-Length: 38 > >Messages-Waiting: yes >Voicemail: 4/11 > >Is there a way that I can change this 'originator' to a numeric value ? > >Cheers > >SWSW - See the below conversation from April regarding the same topic. I don't think this became a patch or made it into CVS. JT