similar to: ztdummy: rtc: lost some interrupts at 1024Hz

Hi, I'm getting crazy about ztdummy. I have to replicate a PBX where ztdummy is working fine but for some reason I cannot. The two machines have the same kernel, motherboard, the same gcc version and the same zaptel 1.4.8. On the second machine zaptel compiles without errors and ztdummy.ko is generated but when I modprobe it I get the following error in messages: rtc: lost some interrupts

I'm having trouble with ztdummy and I can't seem to figure it out. I am running Zaptel 1.4.12.1 under Debian 4.0 with latest updates applied and I have compiled Zaptel from source along with a new kernel from Debian sources to include 1khz timer support. The modules build fine, yet when I load them I get the following output from dmesg: rtc: lost some interrupts at 1024Hz And then

Hello, Today we setted up a server that needs to use MeetMe but doesn't have any Zap hardware. So we need to use ztdummy (at least, this was our idea). Rarely: zttest is not working at all (100% bad, using zttest -v doesn't give anything, etc.). Of course, after load ztdummy, there isn't any background or anything. It is the same kernel (Debian Etch default kernel, 2.6.18) than

Hello, Maybe I'm missing something here. What is the proper way to use RTC with ztdummy now? I'm using -HEAD from a day or two ago on Linux 2.6.11.11. In zaptel/Makefile, I changed CFLAGS to: CFLAGS+=-I. -O4 -g -Wall -DBUILDING_TONEZONE -DUSE_RTC #-DTONEZONE_DRIVER and I get.. make -C /lib/modules/2.6.11.11/build SUBDIRS=/usr/src/zaptel modules make[1]: Entering directory

Hi im having this message in my console and dmesg. rtc: lost some interrupts at 1024Hz im not sure what this is. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070227/0862a1ba/attachment.htm

Hi list, we have a dual Xeon server with 2GB RAM running Debian Etch 2.6.18.4-686 kernel. The server has 2 B410P cards plugged in. No other card. We installed Asterisk 1.4 trunk with zaptel trunk, ran make b410p, the install mISDN1.1.0 (for bug 9064) configure and compile Asterisk with chan_misdn, all is fine. In misdn-init.conf we have added option=1,master_clock. Asterisk is up and

Hello, I''ve just found post on the list about Asterisk / Zaptel ztdummy problem http://lists.xensource.com/archives/html/xen-users/2006-04/msg00452.html http://lists.xensource.com/archives/html/xen-users/2006-07/msg00267.html My Xen host run with debian sarge 3.1 and I ''ve exactly the same problem when I try to load ztdummy inside a domU rtc: IRQ 8 is not free. WARNING:

It's taken me about a day just to get ztdummy to compile into a module that the amazon ec2 xen kernel will accept (you have to downgrade the version of gcc among other things), but now I'm getting the following error and I'm stumped: rtc: IRQ 8 is not free. WARNING: Error inserting rtc (/lib/modules/2.6.16.19-xen/kernel/drivers/char/rtc.ko): Input/output error ztdummy: Unknown

Hello System: Debian etch with kernel 2.6.18-4-686 or 2.6.18 custom. Asterisk Version: SVN-branch-1.4-r55483M Zaptel Version: SVN-branch-1.4-r2302 modules all ok in compilation time. And modules loaded: ztdummy 5928 0 rtc 13364 1 ztdummy zaptel 181540 1 ztdummy crc_ccitt 3200 1 zaptel In /dev/zap directory I have:

Hi, I've install zaptel and I don't have a Digium card installed in the machine. So I want to install ztdummy to have Music On Hold working. I've follow these instruction http://www.voip-info.org/wiki-Asterisk+timer+ztdummy and at the point "modprobe ztdummy" it's failing. I'm getting these messages: root@dubic:~# modprobe ztdummy FATAL: Error inserting ztdummy

I've compiled ztdummy, following the directions on http://www.voip-info.org/wiki-Asterisk+timer+ztdummy, and when I try to modprobe zt : #modprobe ztdummy FATAL: Error inserting ztdummy (/lib/modules/2.6.18-gentoo-r6/misc/ztdummy.ko): Input/output error FATAL: Error running install command for ztdummy I haven't been able to find any info on what the I/O error might be or how to

Hi, I've managed to build the zaptel modules including ztdummy; ztdummy is installing fine in the modules list and the relevant device structures are present. lsmod | grep ztdummy gives:- ztdummy 5160 0 zaptel 186916 1 ztdummy rtc 12372 1 ztdummy Where I'm stuck is I am now at a loss as to how to configure my /etc/zaptel.conf and

I have several servers using ztdummy as the timing source, some CentOS 4.x, some CentOS 5.x, some Asterisk 1.2.x, some Asterisk 1.4.x. "zap show status" differs between the servers: ZTDUMMY/1 (source: Linux26) 1 UNCONFIGUR 0 0 0 ZTDUMMY/1 (source: RTC) 1 UNCONFIGUR 0 0 0 ZTDUMMY/1 1 UNCONFIGUR 0

Hi - I am using centos 4.6 on an ebox 4300. Everything seems to be working except the /proc/interrupts rtc is always constant. On other machines the rtc (which ztdummy from asterisk) is always incrementing. the uhci_hcd and ehci_hcd are both running. What can cause this? Jerry -------------- 0: 274276 IO-APIC-edge timer 1: 9 IO-APIC-edge i8042 2: 0

hi there i am facing problem in installing the ztdummy module in fedora7, 2.6.22.5-76.fc7 is the version of the kernel. here are some logs for your kind consideration, i have tried varios solution from voip-info.org and many more, but in vain. Message from "/var/log/messages" Sep 13 14:27:14 localhost kernel: Zapata Telephony Interface Registered on major Sep 13 14:27:14 localhost

What does it take to get ztdummy to work correctly? I have a new laptop HP HDX9200. I am running asterisk 1.4.19 and zaptel 1.4.9.2 Zaptel compiles fine. asterisk compiles fine. ztdummy loads asterisk runs. Problem is playback() does not work. So then I stop zaptel, asterisk runs and playback() now works. However, meetme()'s dont work. I need ztdummy I'm pretty sure for that. I am

Anybody having issues with ztdummy under the current 2.6 RC7? I get the following errors when trying to modprobe ztdummy: "Unable to register zaptel rtc driver" Doing a Google on the error shows reference to a message from 2004 that said you might not have RTC compiled into the kernel. Checking via: cd /usr/src/linux-2.6.13-rc7 grep -i rtc .config shows: CONFIG_APM_RTC_IS_GMT=y

All too common and largely undocumented. I had this same problem. Installing ztdummy changes Asterisk to use it for timing of playback, apparently. Removing ztdummy "fixed" the problem. To get it all to work, I had to upgrade to to at least kernel 2.6.23.11 (previous versions are either missing options are just broken.) After doing this, I recompiled ztdummy and it worked. Note

It looks like something has changed in the HPET kernel code in 2.6.28 (maybe .27 too) that's stopped ztdummy.c compiling (in 1.2 and 1.4 versions of zapata) A kernel structure member has been renamed with some crypic comments in the lkml about it. Anyone know the right thing to do - I'm not up on the linux kernel guts, nor how ztdummy might interact with it, so simply renaming the

Hi all , In my pbx ,there is no zaptel card ,so i loading ztdummy,but problem appear,when i dial the number into the pbx,sometimes i can not listen to the ivr ,and no rtp create. if i unload the ztdummy driver,the proble will disapper. I guess may be the timer source problem, but i dont't know how to solve it . anyone can give me some advices will be appreciated. asteirsk-1.4.21 and