similar to: Configuring Bandwidth.com SIP trunks to prevent one-way audio

I need some extensions logic assistance, I'm trying to dial out one of multiple SIP trunks, in sequence. I need to detect a busy SIP trunk(I only allow 1 call per trunk) and roll over to a second or third depending on that busy status Here's what I've got for a macro thusfar, but it's not working(fails if the 1st trunk is busy) extensions.conf: [globals] trunk_1 => SIP/trunk1

Hi, I am attempting to setup an asterisk server, current specs: CentOS release 5 (Final) Asterisk 1.4.11 Asterisk-gui checked out from SVN last week I started with a fairly basic setup involving one VOIP provider who provided one dial in number, and a couple of handsets. Config files are below. It was pretty much totally built by Asterisk-gui, except for the fact I had to add

Update on this: I found that by changing insecure = very to insecure = invite, adding the second trunk no longer stopped calls working. I've read the documentation on this switch and still don't see how it applies/is meant to get used. Anyway, with this change in place, the following may help: asterisk*CLI> sip show registry Host Username

hi there, i run asterisk 1.4 on my debian machine, which is in my internal 10.x.x.x network, behind my main computer, i cam make call, receive calls, all works fine, with all providers except sipgate.de, there i can receive call and make them, i can hear the other end but they can not hear me, this is only the case with sipgate.de i don#t know how to configure it and thought maybe someone can help

Hi everyone, having a issue with asterisk and my new Voip providers service. Iv set up many asterisk systems before but never seen this and have tried to fix this with no luck.. I have used this exact same sort of setup for 5 other providers and never had this issue, If i replace the trunk login details with my works voip account and set it to IAX then it works perfect, Just not the new

I have a SIP phone calling via a SIP trunk another asterisk system, that then sends the call out a ZAP channel. When I press any of the features defined in features.conf, The end user on the ZAP side hears the DTMF tones, and none of the features work. My DTMFmode on the SIP users definition is rfc2833 Asterisk console doesn't register that a feature is being recognized, any ideas? Below

I am trying to help a guy out with his Atcom IP04. He has set it up like this. He has a handful of IP phones all connecting via SIP. He has two phone lines connected to the FXO ports one from telecom, another from vodaphone. He has set up the dialplan so that one of the trunks fails over to the other trunk. Everything seems to be working OK except for outgoing calls. He can call from

Hello. I don't know if this is a problem, but I was expecting a different behavior. Users, have to dial "0" to get an external line, and afterwords the number they want to dial (exe 12345). The thing is: 1-If user dial "012345" there is an error and the call isn't made and the error is "handle_request_invite: Call from 'XXX' to extension '012345'

Hi, I've just built my first asterisk server. Current information: OS Version: Linux asterisk.visinet.com.au 2.6.18-8.1.8.el5 #1 SMP Tue Jul 10 06:50:22 EDT 2007 i686 i686 i386 GNU/Linux Asterisk Build: Asterisk 1.4.11 Asterisk GUI-version Revision: 1479 $ Server Date & TimeZone: Thu Sep 6 02:37:11 EST 2007 I've used the Asterisk GUI for setup with two IP

Connected to Asterisk 1.4.11 currently running on asterisk (pid =3D = 31999) -- Remote UNIX connection Verbosity is at least 8 -- Executing [00425298582 at numberplan-custom-1:1] Macro("SIP/8001-b7d0bb20", "trunkdial|SIP/trunk_3/0425298582") in new stack -- Executing [s at macro-trunkdial:1] Dial("SIP/8001-b7d0bb20", "SIP/trunk_3/0425298582")

Can anyone tell me why my inbound calls keep getting rejected with 401? Here's the debug information: <--- SIP read from UDP:147.135.32.221:5060 ---> INVITE sip:6087294351 at 216.26.109.22:5060 SIP/2.0 Call-ID: 31007e-31 at 147.135.32.221 CSeq: 1 INVITE From: "Wi M"<sip:4144038968 at 147.135.32.221;user=phone>;tag=9bbc To: "Gregory Malsack"<sip:s at

Hi all, I have *NOW beta 6 (asterisk 1.4.5) and I've configured it with a SIP trunk line. I can make outgoing calls, but I cannot receive any incoming calls. A port scan of my * server shows that port 5060 is closed. How do I open this port? In my users.conf, I have set [trunk_1] to hassip=yes and port=5060. Also, in the global SIP.conf file bindport=5060 bindaddr=0.0.0.0

We have multiple entries like the one below in our users.conf file... where the username. Contact and secret changes for different customers and we register on their behalf to the Service Provider. For the trunk below: when the call is placed out, Asterisk (1.4.18) sends the username of "abc.com" in the MD5 Auth .....which obviously does not match the trunk setup for this Customer with

Connected to Asterisk 1.4.11 currently running on asterisk (pid =3D = 31999) -- Remote UNIX connection Verbosity is at least 8 -- Executing [00425298582 at numberplan-custom-1:1] Macro("SIP/8001-b7d0bb20", "trunkdial|SIP/trunk_3/0425298582") in new stack -- Executing [s at macro-trunkdial:1] Dial("SIP/8001-b7d0bb20", "SIP/trunk_3/0425298582")

Connected to Asterisk 1.4.11 currently running on asterisk (pid =3D = 31999) -- Remote UNIX connection Verbosity is at least 8 -- Executing [00425298582 at numberplan-custom-1:1] Macro("SIP/8001-b7d0bb20", "trunkdial|SIP/trunk_3/0425298582") in new stack -- Executing [s at macro-trunkdial:1] Dial("SIP/8001-b7d0bb20", "SIP/trunk_3/0425298582")

I got no resonses to this and some funny bounces so I'm trying again. First of all Merry Christmas. Second, my first problem with my provider not staying registered with our server was my fault. We moved our server room and I restarted the test system and the production system causing them to ping-pong back and forth registering with our provider causing random problems, they are both

I have an issue with receiving inbound calls. I've got bandwidth.com trunks incoming to my asterisk box, bandwidth sends all incoming traffic to one of two IP addresses, and requires outbound traffic go to either of the same two IP addresses. I've got to use fromuser=<DID> on outgoing calls so they apply the right caller ID. My issue is that I want incoming calls to match on a

Connected to Asterisk 1.4.11 currently running on asterisk (pid =3D = 31999) -- Remote UNIX connection Verbosity is at least 8 -- Executing [00425298582 at numberplan-custom-1:1] Macro("SIP/8001-b7d0bb20", "trunkdial|SIP/trunk_3/0425298582") in new stack -- Executing [s at macro-trunkdial:1] Dial("SIP/8001-b7d0bb20", "SIP/trunk_3/0425298582")

Hi, I am trying to setup a simple home voip service w/ * I have compiled and installed the svn source as a first step I am trying to configure SIP for inside my network. I have a handful of softphones and a few hardphones that I want to all be able to call each other I have configured users.conf with a single softphone(kphone) and have tried calling itself (ext 6000) and the demo from the

I'm not getting inbound audio from bandwidth.com. Their engineer said the invite that they're sending me looks like this: INVITE sip:+15129616808 at 67.198.16.18:5060;transport=udp SIP/2.0. Record-Route: <sip:216.82.224.202;lr;ftag=VPSF506071629460>. Record-Route: <sip:4.79.212.229;lr;ftag=VPSF506071629460>. Via: SIP/2.0/UDP 216.82.224.202;branch=z9hG4bK6314.4f7b5d05.0. Via: