similar to: Aastra phones and dns srv records

Hi, I can't find a way to tailor DHCP/TFTP/HTTP environment so that brand new Aastra SIP phones can be auto-provisioned when config files are stored in a specific TFTP subdirectory instead of TFTP root directory. For instance, TFTP root directory is /srv/tftp. When config files are stored in /srv/tftp, a new Aastra can find its config files. When config files are stored in /srv/tftp/aastra,

Has anyone successfully had a SIP phone fail over from Asterisk Server A to Server B using DNS SRV? If so, which phone worked for you? I'm assuming you set up your DNS SRV records so that the IP addresses of A and B are associated with the same name, and both servers have equal priority and equal weight. In order to make calls through B after A goes down, do you have to wait as long as the

Hello everybody, I'm having issues with calls being dropped on Aastra phones, when the call is on hold. Tested with models 6863i and 6867i. I've figured that the call is dropped by Asterisk when it reaches the rtpholdtimeout limit. I've reported the issue to Aastra, asking them to implement some kind of "RTP keep-alive" feature on their phones. Maybe the phone could send

We are installing Aastra phones (480's and 57i's) into a fairly simple asterisk setup. Although call park & pickup work fine using xfer to 700 (to park), dial 701 (to pickup), we are unable to make the park/pickup softkey feature work on the aastra's. Although we've programmed the softkeys per the manuals, they seem to have no effect (just dead). For example, our 57i is

Hi Everyone, I am running DD-WRT on a router that feeds about 30 Aastra 6753i. The phones occasionally go into "No Service" mode. The POE switch doesn't seem to be the problem as it's tested fine. I think the router sometimes gives up and comes back quickly. Or something of that nature. However, the connections are maintained if a call is going on because there are peer to peer

Hi, I`ve been toying with an Aastra phone (9143i) wondering if it could be a good alternative to to the more expensive Polycom phones. One thing which I can't figure out, although it certainly looks simple, is to update the firmware though FTP (not TFTP). I have set the ftp provisioning server in the Aastra phone, and put the firmware file 9143i.st in the root folder where the

Bill I have adtran750 with Vista/Aastra 350, 390, & 480's never seen that one tim -----Original Message----- From: asterisk at billheckel.com <asterisk at billheckel.com> To: asterisk-users at lists.digium.com <asterisk-users at lists.digium.com> Date: February 21, 2003 12:52 PM Subject: [Asterisk-Users] Fun new problem with Aastra 390 ADSI phones >I seem to have

I have two Aastra phones, a 6730 and a 6757, both connected to Asterisk v1.6.2.1. They can call each other's extensions (and make and receive calls otherwise), but they cannot transfer calls, not even to outside extensions on the PSTN. The procedure I use is to accept a call on one phone, press the transfer button, dial the other extension, and then press "transfer" again after the

Is there a command in Asterisk that will cause all Aastra phones to reboot and/or recheck for new firmware? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070312/d394c874/attachment.htm

Sorry for being a little off topic, but I'mconsidering a few new phones for my Asterisk installation. I have a mix of Polycom 500/600s and an Aastra 480i CT. I'm considering adding a couple of Aastra 57i or 57i CT. Does anyone here have experience with the 480i CT and the newer 57i CT? I'm curious as to the real differences. Thanks, Michael Graves Sr Product Specialist Pixel Power

Hello all, Our setup consists of an asterisk server (version 1.4.8 ) with a TDM400 card (4 FXO ports) and about 10 aastra 5Xi phones (2 phones are 57i and the rest 55i). The asterisk server is also configured with two SIP trunks. The problem that we're having is that if at any time there is an internet connection interruption to the asterisk server all the aastra phones freeze. If we disable

Hi, I need to make use of BLF feature on Aastra 6757i phones but its an Asterisk 1.4 using realtime architecture. Extensions are defined in realtime database and dial plan is in AEL. I am able to correctly setup hints in the dialplan, but they don't work. Did some research and found out that hints don't work work with realtime extensions. Is there any work around? On voip-info I read

Hi, Some odd behaviour here. A friend and I were talking tonight, and it seems we have both seen the same problem. We are both using aastra phones (I am using 9113is). We have a connection to and from providers via SIP and IAX. When I place a call on the local hold of the phone, and then pick them back up I can hear them, but they can not hear me. However, if I park the call,

Does anyone know if it is possible to upload a common directory to all Aastra phones (480i, 9133)? Is there someting equivalent to the way Polycom phones do it? -- Carlos Chavez Director de Tecnolog?a Telecomunicaciones Abiertas de M?xico S.A. de C.V. Tel: +52-55-91169161 Ext 2001

Hi everyone; Is it possible to provision lock Aastra phones to provider so that no soft or hard reset can unlock them? Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20130706/e7b5a47f/attachment.htm>

I just noticed the Aastra 57i do something that I haven't seen before. I called from one phone (phone 1) to the 57i. I answered it. Then, I pressed Transfer and dialed the extension for the third phone (in this case a Cisco 7960 in Sip). I did not answer the Cisco, but noticed the caller ID was showing the Aastra (as expected). I hung up the Aastra to complete the transfer and noticed the

Hi Guys, Running Asterisk v1.4.26 (Elastix flavour) and have Aastra 9480i, 6757i, and 6730i, but none of them indicate the voic-email. Where should I look for trouble to find the root issue for MWI? Thanks, -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100714/d268d1f8/attachment.htm

I have a customer that has recently upgraded their network and now their Aastra 9133i phones are loosing their connection to the Asterisk server. They were using an external Asterisk server and now we have installed a new internal server with Asterisk 1.4.8 on a SIP/IAX implementation with no Zap cards. Only hard phones seem to be having problems keeping a connection to the server, soft phones

Running asterisk 1.2.7 with latest zaptel on centos4.4. with Aastra 55i phones. Local outbound calling works fine, but ATT requires clients enter 7 digit code for long distance. All calls with 7 digit code are lost within 20 seconds of the call. This is the message I?m getting: Apr 19 12:38:16 WARNING[9615]: chan_sip.c:1228 retrans_pkt: Maximum retries exceeded on transmission

hello i hope i am posting to the right list, i am a totally blind user, and i want to reprogram my aastra pt 480e phone, my friend used the web configurator, but i think he programmed thw wrong codes, a few questions, is it possible to damage the phone by programming it wrong? also, how does one reset it literally to factory defaults? as unplugging it and replugging it back into the wall