similar to: OT: SEP<mac addr>.cnf.xml file for 7911 with SIP 8.3.5 firmware

This for the archives in case it may help someone: I was able to upgrade two Cisco 7940's from firmware P0030301MFG2 to SIP 7.1 as follows: 1. Installed 7.1 images from the Cisco zip file to the TFTP server. 2. Specified "image_version: P0S3-07-1-00" in SIP<MAC>.cnf and SIPDefault.cnf 3. For the older of the two phones, renamed P003-07-1-00.bin to P0S3-07-.bin, making it

HI all: I have spent a large amount of time configuring/installing phones connected to Asterisk. Halfway through the process I discovered that my Cisco7960 with 2 7914 expansions was not supported in the SIP protocol. After reverting to SCCP 6.0(4.0) I am now perplexed with the hassle of configuring SCCP to properly work with Asterisk. So far I have gotten the phone to dial and receive calls

Hi All I'm trying to get my 7970 working on the latest head version of Asterisk without success, perhaps someone could help. I'm using the head version of Asterisk with the chan_sccp from berlios.de dated 7th August. The compilation of chan_sccp seems to have worked without any problem, however I'm pretty sure the problem I have is with the config files in TFTPBOOT:- With the 7970

I'm trying to connect a Cisco 7942 to my Asterisk box. I have a 7960 and 7912 currently connected and functioning. I'm trying to use the recommendations from here: http://www.voip-info.org/wiki/view/Asterisk+phone+cisco+79x1+xml+configuration+files+for+SIP I have created a "XMLDefault.cnf.xml" and it took the latest image but the phone states it's unprovisioned? Any

Hi, I have a Cisco 7920 that I'm trying to get working with my * box. When the phone boots it requests XMLDefault.cnf.xml and SEP<MACADDRESSHERE>.cnf. I assume I set the line number, etc in the latter of the two. However I cannot find any reference to how this file is structured. Anyone know? I assume this is why I'm getting the errors below: Oct 17 19:47:24

I have 7965 and am trying to convert the firmware to SIP (SIP45.8-3-4SR1S). Does anyone have a valid XMLDefault.cnf.xml they could share? I have tried the version at voip-info<info.org/wiki/view/Asterisk+phone+cisco+79x1+xml+configuration+files+for+SIP&view_comment_id=14768#Troubleshooting>for the 7941/7961 but unfortunately /var/log/messages shows in.tftp stops sending after

Hello I recently get a Cisco 7940G IP Phone and I try to make several things with it and I en counted many difficulties: 1.) I tried to unlock the phone and to set manually IP Address, Netmask, Gateway etc. I don't get any luck. 2.) I tried to upgrade firmware like they said with tftp server... I downloaded: P0S3-08-11-00.zip and I uncompressed the files in tftpboot directory. I don't get

Appreciate the kindly help and advise. Regards Bilal --------------------- > > Bilal, > > I suggest you turn on logging on your tftp server to see > what files are actually being requested, and if the the tftp > server is dishing them out... Try adding a few v's to your > tftp setup: > > File: /etc/xinetd.d/tftp > Line to change: server_args = -s /tftpboot -v

Hi, I am upgrading a Cisco 7960 phone from SIP V.5.1 to 6.0 and then will to go up to 7.5 However in my first attempt to go from V.5.1 to 6.0 this is hat happens: - The phone reboots - The phone then reads the file OS79XX.TXT from the TFP server. In the file I added the version "P0S3-06-0-00" - It starts upgrading firmware - Then I get the following message: (Upgrade Failed -

Hello all, I've got myself into a bizzare situation that I can't seem to get myself out of... Was wondering if anyone had some advice that might get me 'over the hill' on this... Some background: PBX consists of an Asterisk box (running TrixBox), 4 Cisco 7960's, 2 Polycom IP500's, and now an additional Cisco 7960. The phones are all on a separate LAN. There is

I've got a Cisco 7960 that I'm trying to convert to SIP. Here's what "Firmware Versions" says: App Load ID: P00305000300 Boot Load ID: PC03M030 Version: 5.0(3.0) The files that I have are: P003-07-1-00.sbn P003-07-1-00.bin P0S3-07-1-00.loads P0S3-07-1-00.sb2 If I put "P003-07-1-00" in OS79XX.TXT, the phone tries to tftp XMLDefault.cnf.xml. I've

Hello, I have tried to install this phone for hours now and I can't get it working. Maybe someone can help me :) I have searched for more info from everywhere but there isn't much about 7910 :( >From the CLI I get this: NAME ADDRESS MAC Reg. State ================ =============== ================ ========== telefon --

I have been forced to introduce a Cisco 7971G-GE into my network, because "it has a pretty screen." I have wasted nearly three days fighting with the thing based upon the information on voip-info.org and a few other forums. Asterisk is reporting a 401 Unauthorized. Which typically means bad username/password combination. Unfortunately, all of the usernames and passwords I see in

Hi all, I'm trying to convers some Cisco SSCP phones to the SIP formware. The phone boots, I see it tries to fetch a bunch of files on my TFTP: Jun 17 09:37:45 firewall dnsmasq-dhcp[21202]: DHCPACK(eth2) 192.168.10.103 6c:50:4d:da:f0:67 SEP6C504DDAF067 Jun 17 09:38:10 firewall in.tftpd[22666]: RRQ from 192.168.10.103 filename CTLSEP6C504DDAF067.tlv Jun 17 09:38:10 firewall in.tftpd[22666]:

Hi, I use Asterisk-1.4.22-3 (on Trixbox) and I have a problem with Cisco 7941G with firmware SIP41.8-0-2SR1S (but also with SIP41.8-3-1S), my problem is that Cisco phone isn't authenticated on Asterisk. In tftp directory I have: apps41.1-1-1-15.sbn cnu41.3-1-1-15.sbn copstart.sh cvm41sip.8-0-1-18.sbn dialplan.xml dsp41.1-1-1-15.sbn jar41sip.8-0-1-18.sbn load115 load308 load309 load30018

Running those versions of code, my 7960 will not register with Asterisk. The same 7960 is authenticating against another * server on line 2 just fine though - with the same settings in sip.conf. On the failing * server I am just getting 401 unauthorized errors on the console. From the phone's shell I get that t is registering, but not authenticated .1. from show reg. Any ideas would be

I have asterisk 1.09 running with chan_sccp.20050701 on Fedora core 4 with kernel 2.6.12. I have a Cisco 7940 working with X-lite working on XP too, connecting to each other, Asterisk and FWD. The 7940 upgraded to SIP7.4 with xmlDefault.cnf.XML getting delivered via tftp using the loadInformation8 parameter method taken from voip-info.org ("Configuring Cisco 79xx phones with Asterisk"

Hello; I am facing a problem to let Cisco IP Phone 7942G register on Asterisk. The firmware has been downloaded from the TFTP successfully and currently I am running this load SIP42.9-3-1SR2-1S* I feel that there is a problem in the SEPMAC.cnf.xml but really I do not know which one to be used exactly. Basically, there is some effect that appears on the Phone (for example, it is appearing the

I've got a Cisco 7970 that's not completing its network registration to Asterisk. The "Registering" message stays on the screen (with the moving time wheel). After a few minutes, the onscreen message flashes "Updating CTL" then "Loading...", then the status messages update with: No valid CAPF server File Not Found: CTLFile.tlv No CTL installed

An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031208/0128c586/attachment.htm -------------- next part -------------- Thanks alot. I found the problem, with SIP firmware image was 2.* large size SIPDefault.cnf leads to Buffer overflow, I kept firmware_version field and deleted rest. That helped in upgrading the firmware to higher version.