similar to: Buffer re-sync with Openvox card...

I have an Asterisk 1.2.16 server running CentOS 4.4 with a TE110P card and an OpenVox A1200P card. Up to today everything was working perfectly. The OpenVox card has 8 FXS and 2 FXO ports. The two faxo ports are used for a GSM adapter and for an ATA connected to Vonage. The problem we started noticing today was that the Vonage line will receive a call and then cannot connect to any of the SIP

Does anyone know if the Dell Power Edge 1900 has an issue with multiport E1 cards? We've had this server running for a while now with 2 E1 cards. At first we tried to install an Openvox D210P card with two E1 ports but after a couple of kernel panics we thought that maybe the card was defective and we replaced it with two Digium TE120P cards. Now the customer needs a third E1 port and

Hi all, Does anyone have any good/bad comments on the A1200P 12-port fxo/fxs card from OpenVox? I'll be using one to with 8-12 fxo interfaces.? The cards will be plugging into a cable-modem / phone adapter.? We weren't able to port the numbers, so we're going to use the existing PSTN connection and replace all of the office phones. With these short distances, will I need to worry

I am having a problem with and Asterisk installation where two ports connected to a TDM400 card will have a very loud noise when you try to dial. The server has an OpenVox D110P, a TDM04B and a Xorcom Astribank 8 fxs. It is running Zaptel 1.4.11 and Asterisk 1.4.18. The problem always happens with two ports (34 and 35) which are connected to two GSM gateways. They will work fine for a week

Hello again, I am using mix monitor and the majority of the sound records perfectly. I then get a "Internal Data Stream Error" near the end of the sound file. Has anyone ever seen this? I am allowing the ULAW amd ALAW codecs and an example dialplan entry is ; ; phone line phone1 exten => phone1,1,Answer() exten => phone1,2,MixMonitor(test.wav|av(0)V(0)) exten =>

Yesterday a customer was attacked from the following IP addresses so add them to your blacklist: iptables -A INPUT -s 37.8.119.75 -j DROP iptables -A INPUT -s 37.8.22.240 -j DROP -- Telecomunicaciones Abiertas de M?xico S.A. de C.V. Carlos Ch?vez Prats Director de Tecnolog?a +52-55-91169161 ext 2001 -------------- next part -------------- A non-text attachment was scrubbed... Name: not

I am trying to set up Astunicall 1.4.16 with a link from Alestra in Mexico City. I have done everything I usually do for other links in Mexico but this one simply will not send or receive calls. I just get Protocol error. Anyone has any experience with R2 and Alestra? -- Telecomunicaciones Abiertas de M?xico S.A. de C.V. Carlos Ch?vez Prats Director de Tecnolog?a +52-55-91169161 ext 2001

I am having a bit of a problem implementing the pickup command in my dial plan. I have setup this rule: exten => _*8XXX,1,Pickup(${EXTEN:2}) This works as expected when someone dials an extensions number and I can get the call. The problem I have is that when a call enters my welcome menu and does not press anything there is a timeout that sends them to the recepcionist. The rule is:

We have a customer that has Asterisk 1.4.12.1, Zaptel 1.4.5.1, Asterisk-Addons 1.4.3. running on a Dell Poweredge 1900 server (Dual Core Xeon, 4gb RAM, 500gb Raid 5). Until a month ago they had two TE120P cards and everything was working fine. Since they needed to add a third E1 line we decided to change one of the TE120P cards with a TE210P. After the change we had a couple of crashes (server

I am using Asterisk 1.4.4 on a CentOS 5 machine for a small call center with 6 agents. I am using realtime for queues and sip and I am also trying to use realtime static to load agents.conf. The only problem I am having is that no agents are loaded when I start Asterisk. I have to manually do a "module reload chan_agent.so" so the agents get loaded from the database. Obviously

We have a setup running Asterisk interconnected to a Panasonic TDA200. The Asterisk server has a two port E1 card, one connected to the phone company and the other to the Panasonic. Everything is running fine and we can send and receive calls from the Panasonic and phone company. We are using MFC/R2 for both links on Asterisk 1.4.4 and Zaptel 1.4.3. The only detail we have is that we cannot

I have searched for some time but I have not found an asnwer on how to fix the CDR when a call is transferred. The problem is that if someone dials a cell phone and then transfers the call to another extensi?n the CDR for the cell call stops and there is no way to track that the call was transferred so we can bill correctly. Many people have asked this question but there is no answer, only a

Hello Has someone used the OpenVox A400P01 (ie. a supposedly Digium-compatible A400P board with a single FXO module www.openvox.com.cn/products_detail.php?genre_id=9&id=28) successfully? I've put it in an older PC with a Gigabyte GA-7ZX motherboard, then a more recent PC with an Asrock K8NF4G-SATA2: dmesg returns nothing :-/ Is there something specific that needs to be done in either

Does anyone know if you can use softphones on thin clients? I have a new customer that wants to use Eyebeam (about 10 users) on a thin client platform. Each user has a little box on their desk that has a USB port, mic and headphone jacks and monitor. I am worried about conflicts when running 10 softphones on the same server since they will all try to use por 5060. -- Telecomunicaciones

I need a refresher course on how many licenses I need to buy. I have an Asterisk server that receives calls by SIP (G729) and then sends them to the PSTN via 32 Zap interfaces on an Astribank. I cannot remember if the license is per channel or per call so I do not know if I need 32 or 64 licenses for this application. Could anyone please remind me? -- Telecomunicaciones Abiertas de M?xico

I have a customer running Asterisk 1.2.13, Zaptel 1.2.11 with a TE110P, a TDM04B and an Astribank-32. They have been complaining that there is echo on calls even when they are IP to IP on the same network. There are 18 Aastra 9133i phones and 30 analog phones connected to the Astribank. I can understand there being a bit of echo on the analog phones, but I do not understand why there would be

I have a customer that needs an Asterisk server to sell minutes for cell phones in Mexico. I do not see a problem with that since he will get the calls by SIP and then use GSM adapters to get the calls into the GSM network. My problem is that his customers only want to be identified by IP and not by a username and password. Is there a way to authenticate just by using an IP address? --

I just upgraded a very old Asterisk installation to the last 1.2.31 I can find in Asterisk.org site. Now for some reason my IAX clients cannot connect to the server. I can do a "iax2 show peer iaxmodem1" and I get this: * Name : iaxmodem1 Secret : <Set> Context : oficina Mailbox : Dynamic : Yes Callerid : "" <> Expire

Is there an archive of security advisories for Asterisk? We recently upgraded a customer from 1.2 to 1.4 and now they are asking for documentation of all security and bug related fixes. I know the advisories get published on this list but is there an easier way to find them than trying to search the list. -- Telecomunicaciones Abiertas de M?xico S.A. de C.V. Carlos Ch?vez Prats Director de

I want to be able to send a prerecorded message to the person I am calling. I know that you can use the application map to do this. Just to test I enabled the testfeature example that is in the features.conf file. When I hit #9 during a call the other user does not hear the monkeys, they only hear a series of beeps. I have tried with different soundfiles and they all give the same problem.