similar to: SIP configuration issues

Hi list, I have for a year I have an account to call with broadvoice from about 3 days beginning a not registered problem of, asterisk shows to a message of error with the DNS, and my dns this working fine WARNING[5770]: chan_sip.c:7595 transmit_register: Probably a DNS error for registration to 908XXXXXXX at sip.broadvoice.com@sip.broadvoice.com, trying REGISTER again (after 20 seconds) [Dec 16

Can anyone tell me why my inbound calls keep getting rejected with 401? Here's the debug information: <--- SIP read from UDP:147.135.32.221:5060 ---> INVITE sip:6087294351 at 216.26.109.22:5060 SIP/2.0 Call-ID: 31007e-31 at 147.135.32.221 CSeq: 1 INVITE From: "Wi M"<sip:4144038968 at 147.135.32.221;user=phone>;tag=9bbc To: "Gregory Malsack"<sip:s at

I'm looking to find a test tool that will register with our Asterisk (Trixbox) server here at work and place an outgoing call via our main SIP trunk (BroadVoice) to confirm that things are working. I've looked around but I can't seem to find any tools that will do what I'm looking for. I can't just monitor the status of the trunk inside Asterisk, as this is the normal status:

Dear Asterisk-Users, does anyone know how to prevent non-free calls to Broadvoice Unlimited World ? This first thing I did is I accept only that coutry prefixes (in extensions.conf) that are in the Unlimited World dialplan. I was also able to filter out german cell phones (cause they begin with 1 and no landline is beginning with 1). US is also no problem as cell phone calls are unlimited

I'm still not getting my outbound to work. I've seen two patches relevant to broadvoice for chan_sip.c which apparently have already been added to CVS. I'm dropping all outgoing calls after ~30 secs. Asterisk doesn't seem to know they're gone though. I called my cell w/ broadvoice and turned on sip debug AFTer the call had physically dropped: *CLI> sip show registry

Hi, i'm having problems with broadvoice incoming calls. I can perfectly place calls but my Asterisk Box is having problems when registering with the SIP Proxy. Sometimes it register and the call gets into asterisk, but without sound (seems to be NAT problems) and sometimes its not possible for asterisk to receive the calls. Everything was working great exactly for a month, but a week ago it

I'm experiencing a "Failed to authenticate on INVITE" error (see output below) whenever I try to MAKE a call through the Broadvoice account. I noticed some others had the same problem but it went away when they rebuilt Asteris w/ a new version. N such luck for me! I'd be grateful for any assitance. Here's what I've done so far: 1) I downloaded the latest stable

In a 1.2 release of asterisk, I've had no problem connecting to a Broadvoice SIP peer, to allow routing outgoing calls from Asterisk to Broadvoice. Now, with the same SIP configuration, I cannot establish the peer. I've enclosed a SIP log in the hope that someone can help me analyze this failure. I'd guess the issue is NAT related and wondering if someone can spot a problem in the

Hello, Have a weird problem when using asterisk (1.0.6). There are certain numbers I cannot dial when using asterisk with my broadvoice account. No problems with inbound. With outbound calls, I can call some numbers (for example broadvoice customer support number) and unsuccessfully with some. However, when I configure my account directly on x-lite, I dont see these outbound problems. Here is a

Hello All, I'm just getting into *, and trying to use a Broadvoice account. It works inbound, but Outbound fails no matter what sip.conf parameters I try. From the recent posts here I think it could be: A bad CVS release - I will try to download and build from a new one Broadvoice not challenging and/or Asterisk not responding with an Authorization: in the INVITE header. I am

I have been going crazy with this also since Sat. Our server was working perfectly with BV but will now not place calls to BV. Incoming from BV works fine. I felt sad rebooting it today, it had been running for almost 200 days! Here is my error message from the console... Notice I am running today's CVS Connected to Asterisk CVS-03/08/05-14:32:39 currently running on com (pid = 1624)

Hello all, When I call the Broadvoice number all is good. When I try to call out through DISA on my broadvoice line i get the following: Executing Dial("SIP/147.135.0.129-0815bc60", "SIP/16037862111@proxy.bos.broadvoice.com|30") in new stack -- Called 16037862111@proxy.bos.broadvoice.com -- Got SIP response 480 "Temporarily Not Available" back from

I have searched the list and cannot find a sip 400 solution posted that solves my problem. If anyone has any thoughts or suggestions on the following I would greatly appreciate it. I didn't have this error before Broadvoice made their changes this weekend. Now when I make a call it connects but, I cannot hear anything on the other end... The full message I have is: 8 headers, 0 lines

Hi, I have two accounts with broadvoice. Now, I want to be able to distinguish between them. I though that this would be simple by adding "/EXTEN" at the end of the register statement. For example: register => num1:pass@sip.broadvoice.com/1000 Unfortunately, this is not working. When I call into my box I hear busy tone. My config looks like this: [root@voip asterisk]# cat sip.conf

Hi Guys, I have client with a Cisco 2690 call manager solution that wants to upgrade but cannot stomach the costs of continuing with Cisco The installation will go up to 100 users The client currently has about 40 Cisco phones and would like to continue with these phones with the odd Polycom I'm looking at plugging in an Asterisk box and using the existing Cisco box as a PSTN gateway only

I've tried everything with the * box after this weekend. I have read every document on the problems people are having with them after this weekend as well, but none of them address my problem. I checked my settings in my sips which I have below as well, I have changed the host file a few times, but this was new to me and I never had modified it before. I have and the same results

Egad, not again with Broadvoice! Anyhow, I recently installed AAH and configured my TDM11B and got that and some SIP phones working. I still have some issues to work out, etc, but my current problem is Broadvoice. I have checked out all of the online resources, including the recent list exchange about the recent changes made by Broadvoice. However, the one thing I have found to be consitent in

Hi all, I've been trying to use BroadVoice as a SIP service provider. They don't officially support * but are helpful when it comes to answering questions for setup parameters. They claim they have no firewalls or access lists that need to be set up so I can get access to their servers. However, something's still not quite right when I use the parameters. It looks like our Asterisk

> > I've tried setting up my sip.conf in two ways: > > > ------------------------------------------------------ > register => [240xxxxxxx]:[my_password]@sip.broadvoice.com > > > [Broadvoice] > type=peer > username=[240xxxxxxx] > fromuser=[240xxxxxxx] > secret=[my_password] > host=sip.broadvoice.com > context=incoming >

I've been wondering for a long time why my reinvite option is not working with Broadvoice anymore. It happend during the time Broadvoice was having a lot of issues, so I decided to wait. Recently I decided to test the same sip.conf with another VSP (SIPphone) and it worked fine! No issues on the reinvite. Note: clients and server using ULAW (only), no NAT or firewalls, public ip address and