similar to: TDM410P driver?

Hello everyone. I got a little problem in here: I want to set up a queue so that if anything of these happens: a) No agents logged in b) All agents busy Then the user gets diverted somewhere. I used this (for testing purposes only, of course): exten => 7080,1,Answer() exten => 7080,n,Queue(teste) exten => 7080,n,Goto(${QUEUESTATUS}) exten => 7080,n(ERROR),NoOp(${QUEUESTATUS}) exten

I have a big headache. I have an Asterisk server connected to an Avaya PBX. Everything is working between those two. The problem is that I have 45 PAP2T adapters and 45 SPA3102 adapters that connect via the Internet to the Asterisk server through a Fortinet firewall. When calling from a PAP2T I get one way audio, the remote site can hear me but I cannot hear them. If I do an "rtp

Is there a way to busy out a Zap channel? I have a customer who is having problems with a line connected to a TDM800 card and we would like to busy out that line. Since that line is the head of the hunt group I cannot simply disable that channel, I need to busy the line so calls will come over the other lines. -- ?Telecomunicaciones Abiertas de M?xico S.A. de C.V. Carlos Ch?vez Prats Director

This message is pointed directly to Steve Underwood. I tought it would not be nice to directly email him with a question that interests a good part of the Asterisk community, so here it is. :) Steve, remember a few days ago when we discussed about issues on Asterisk 1.6.1.13 and T.38 fax reception? Well I opened an issue on Mantis (https://issues.asterisk.org/view.php?id=16756) and turns out it

Hi, I'm getting some strange behaviour on Asterisk 1.4 running on Debian Stable (Lenny). I suspect it's something to do with my setup, rather than a bug, but I'm struggling to see it, and would appreciate any input. Setup: PC with two ethernet cards: eth0 goes to local network, including two SIP phones (Aastra 9112i, wired, and Nokia E75, over WIFI); eth1 goes to router and

Hi all, I have the below extension defined under sip.conf: [2203] type=friend username=2203 secret=123456 host=192.168.0.164 mailbox=2203 context=intern canreinvite=yes dtmfmode=rfc2833 When trying to register from a softphone installed on a PC behind a nat with IP=192.168.0.164, I got 503 FOrbidden...Does anyone have any idea about what could be the issue? Regards -------------- next part

Not sure if Polycom is changing their policy or if this is an accident, but you can actually download SIP 3.1.1 right from their web site. Anyone looking for firmware should get it now before it disappears. SIP app and release notes can be found here: http://www.polycom.com/usa/en/support/voice/soundpoint_ip/soundpoint_ip450.html -Dave

Does the application PGSQL has been removed from Asterisk? Couldn't find it on Asterisk source and addons. Atenciosamente, Vin?cius Fontes Gerente de Seguran?a da Informa??o Canall Tecnologia em Comunica??es Passo Fundo - RS - Brasil +55 54 2104-7000 Information Security Manager Canall Tecnologia em Comunica??es Passo Fundo - RS - Brazil +55 54 2104-7000

hi, there is T.38 fax gateway for asterisk http://bugs.digium.com/view.php?id=12931 please test it and report bugs for people from http://www.voip-info.org/wiki-Asterisk+T.38+Bounty if you still want donate t.38 development please contact me at cervajs at fpf.slu.cz --------------------------------------- Marek Cervenka =======================================

Hello, I have transcoding card TC400P installed in server running Debian with Asterisk 1.4.23. Everything seams to be fine and after I boot up server I see in dmesg: 7.590966] Zapata Telephony Interface Registered on major 196 [ 7.590966] Zaptel Version: 1.4.12.1 [ 7.590966] Zaptel Echo Canceller: MG2 [ 7.610963] zttranscode: Loaded. [ 7.618969] wctc4xxp: tc400b0: Attached to

Has anyone figured this out yet? Lots of places say to add the following to sip.conf of an Asterisk 1.2 system (current production machine/Asterisk as root): tos=0xB8 (Hex B8 = Decimal 184 = Binary 10111000) or if you are running Asterisk v1.4 or newer: tos_sip=cs3 ; Sets TOS for SIP packets. tos_audio=ef ; Sets TOS for RTP audio packets. tos_video=af41 ;

Hello everyone. I'm struggling to get T.38 faxing to work in Asterisk 1.6.1.13 with a SIP DID provider here in Brazil (GVT - Vox IP service). Here's my scenario: When faxes arrive by a specific DID, they are routed thru this simple macro: [macro-recebefax] exten => s,1,Set(DB(fax/count)=$[${DB(fax/count)} + 1]) exten => s,n,Set(FAXCOUNT=${DB(fax/count)}) exten =>

I'm playing around with an ALIX 2D2 board (http://www.pcengines.ch/alix2d2.htm). It's a fanless, x86 system using an AMD Geode processor with 256MB of RAM. Also available are two network interfaces, two USB ports and one serial port (no keyboard or VGA). I'm using the Voyage Linux distro, which basically is Debian Lenny optimized for this board. Asterisk 1.6.1.12 runs fine on the

The TDM410P doesn't support 'hvac', only the obsolete TDM400P supports that option was for the old phones that have a neon light (or equivalent LED+ZENER ciruit). Are other phones off the TDM410P (other than the VTECH) working, or is the Vtech the only model with VMWI available to you. I'm not able to check at the moment, I have copied the asterisk-users list, someone else may

Hi, I just got a Xorcom Astribank with 8 FXS but it does not work. So I tried resetting and loading the firmware. But loading just times out. /usr/share/zaptel/xpp_fxloader usb --------- FIRMWARE LOADING: (usb) [1 devices] 'xpp_fxloader'[11561]: USB Firmware /usr/share/zaptel/USB_FW.hex into /dev/bus/usb/002/003

Hello everyone. I'm trying to set up a SIP DID on a customer, which uses T.38 for faxing. Voice is working great, but I never configured anything using T.38 in Asterisk so I'm kinda lost. On my googling I found out that would be best letting the Linksys SPA8000 (for those that don't know, it's identical to the PAP2 but with 8 ports instead of 2) and the telco negotiate with each

I'm running dahdi on the host system, and have added the /dev/dahdi/ devices to the guest vserver as recommended in Beave's "Virtual Private Asterisk" whitepaper (http://www.telephreak.org/papers/vpa/). I tried copying libtonezone.so and libtonezone.h to the guest, but I couldn't anything to replace zaptel.h in DAHDI souce (it seems dahdi.h was deprecated?). I need to

I have a pretty large setup on one of my customers. Digium TE420B (with echo cancelling module), 3 Xorcom Astribanks with 32 FXS each and 1 Xorcom Astribank with 16 FXO. These FXO ports are NOT used for fax/data transmission, as they are connected to cell phones. Not really related to the issue, but there are also 250 SIP phones. The problem is that fax and dial-up connections are really

----- "Chandrakant Solanki" <solanki.chandrakant at gmail.com> escreveu: > Hello > > I have successfully compiled OSLEC for echo cancellation for DAHDI > channel. > > Is there any way to do echo cancellation for SIP Channel. > > Is any, please suggest me.?? > > Thanks in advance.. > > -- > Regards, > > Chandrakant Solanki Short

I'm trying to use a Xorcom Astribank wth Ubuntu 8.04, but got no success. I can see the channel bank with lsusb, but when I tried to use zaptel_hardware, or when I try the /etc/init.d/script, they don't see my Channel Bank. I compiled the latest Zaptel 1.4.10, with Astribank's dependecies, fxload and libusb-dev. Anyone have a similiar experience ? Best Regards, -- Guilherme Loch G?es