similar to: FXS, Power and Sangoma

The HP DL380 G5 (like many rack servers) has no AMP Mate-n-Lok connector available to attach to a card that needs more power than the PCI bus can provide, like the TDM400P when FXS modules are used. HP has confirmed that there is no part they sell to give you such a connector, and Digium says their business edition folks got it to work, but only by doing nasty warranty-voiding things to the

Hello - I've been running Asterisk (quite happily!) for several years now using a Digium TDM400P card in an old Linux box (P4 1.6 w/ 256MB RAM). I'm also running another old PC running m0n0wall as a firewall. Between these two boxes, that run 24x7, I'm drawing a lot more power than needed and hoping to make a dent in my monthly electric bill by consolidating the two into a single box

Hi recently bought a soekris net5501 and a tdm410 to place in there. I am having some issues attaching 12V power to the card via the molex card - basically the box for the motherboard is too small. I have read up about a PWR2400b and it seems to use 2wire pin, I am guessing to connect to P8 just behind the molex connector on the tdm410. can any one here confirm this, or have any info on the

I didn't see this answered in the FAQ, and it's important to one of my application owners. How does RSYNC handle open or write in process files? Thank you! J jadams@molex.com john.adams@molex.com CONFIDENTIALITY NOTICE: This message (including any attachments) may contain Molex confidential information, protected by law. If this message is confidential, forwarding it to

Howdy. I've been having trouble finding a fairly modern server that meets the following requirements: - Molex power connectors (don't want to use the Digium FXS power supply) - 4 PCI slots, one full-length (TDM2400P, 2xT100P, additional NIC) - dual power supplies - preferably dual CPUs >= 1GHz - preferably rack-mountable (3-4RU) - CentOS-friendly We'd also like to stay away from

Hello! In the near future, I'll be deploying an asterisk system that will have (in addition to many SIP handsets) four FXS handsets. Is there a known limitation to the length of cabling that can be used between a Digium/Openvox/Sangoma FXS card and the end station? I understand the card will need a molex power connector plugged in to provide extra voltage. With traditional phone systems, I

Hi all: I've been developing and testing on a tdm400p card and it's been going well. As you probably know, the tdm400p needs an ide power supply, but the dell poweredge 2600 that this card is destined for eventually has all the power supplied on the backplane with no ide cables. The thing is, on the motherboard in the server, there is an ide ribbon connector, and beside that, something

Has anyone come up with a way to get power to a TDM400P card installed in a Dell PowerEdge 1750? Thanks, Adam The contents of this email message and any attachments are confidential and are intended solely for addressee. The information may also be legally privileged. This transmission is sent in trust, for the sole purpose of delivery to the intended recipient. If you have received this

Hello, I have just installed an Asterisk server with a Digium TDM410P card with 3 FXO modules (no module in the 4th slot). It's lived on two different machines (a test machine, which had Linux kernel 2.6.28, and a new dedicated machine which has Linux kernel 2.6.32). On the test machine (2.6.28), I used the Zaptel drivers. Once the kernel modules were loaded, the lights on the TDM410P came

I am looking for any assistance on a issue I am currently experience with Samba and Kerberos. We have kerberos and LDAP client software on UNIX (HPUX 11.11), which authenticates with AD (Windows 2000) using SFU 3.0. All samba users are stored on Active Directory. The HP newest version of samba I do believe is 3.0.2 which from HP is a beta version. I have worked with HP for several weeks to

Does anyone know if a TDM2400 will fit into a Dell 2850? Kerry Garrison Director of Technical Services Tech Data Pros - Orange County's Mobile IT Service Provider (949) 502-7819 x200 - <mailto:kerryg@techdatapros.com> kerryg@techdatapros.com <http://www.techdatapros.com/> http://www.techdatapros.com -------------- next part -------------- An HTML attachment was scrubbed...

No I got confused....yes they are FXO modules with POTS lines coming from bell attached. The only thing I can think of is that since the card supports 3.3v or 5v PCI slots that maybe on a 3.3v slot it requires the other connection all the time because it really does need the 5v and is just not picky about where it comes from. -Jonathan -----Original Message----- From:

Lately I got (used) an APC Back UPS Pro 1000 and Back UPS NS 1080. I got an ethernet-to-USB cable from another UPS, but the Pro isn't detected (with usbhid-ups.) I haven't tried the NS yet but it seems to not be on the list though looks just like the Pro. Some months ago I was discussing setup of a Ferrups 700VA.  I got it to work only with a command in rc.local, but not automatically

Hi! I have just bought the X100P and TDM400P cards to install on my computer to implement the PBX. I also downloaded the newest softwares asterisk_ver0.5.0, libpri_ver0.4.0, and zaptel_ver0.7.0) to install on my computer (Red Hat Linux 8.0). All packages are compiled well. When I use "modprobe" to load drivers (modprobe zaptel, modprobe wcfxo, modprobe wcfxs), the first two (zaptel,

Hello list, I have a customer who is interested in standardizing on dell servers for asterisk deployments. Has anyone had success with a particular configuration? Anything specifically to watch out for? Thank you for your time, Art Arthur Miller Sr. Sales Associate VoIP Supply, LLC. 454 Sonwil Drive Buffalo, NY 14225 716-250-3871 OFFICE 716-630-1548 FAX arthur at

Hi, I just received in the mail my TDM04B card and put it in the computer, now the computer won't even show the video card bios or the post screen. From the digium website I could not find any specific requirements for the pci card, like 32 or 64 bit slot. The motherboard for the computer I put it in is an Asus A7V333 with PCI 2.2 compliant slots. I am thinking that maybe I just got a dud

Hello all, Recently I bought a TDM02B digium card to conect to the PSTN. We pluged it on a Pentium IV 2,8 Ghz, Asus Motherboard, but when we try to start asterisk, the box hangs. Someone have the same card running with asterisk in a similar machine? Could you tell me your box hardware details? Thanks for your time, Ismael Gil.

I've just replaced a X101P card with a brand new TDM400P card (specifically TDM421B). I do have the molex plug attached. kudzu removed the config for the X101P OK, but didn't find the TDM400P lspci does not show the card ?? Bung card ?? How susceptible are these cards to XRays, as it has been thru AU customs and might have been thru the scanner. -- Howard. LANNet Computing

I keep getting this error randomly. I have a TDM400P, I've tried disabling everything in the BIOS. I'm running Fedora core 2.6.11 and asterisk 1.0. Any pointers would be greatly appreciated. Thanks! -Paul

does TDM2400 work on 3.3v pci slot? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070211/ac7d0c79/attachment.htm