similar to: UK GMT/BST settings

Hi, I am upgrading a Cisco 7960 phone from SIP V.5.1 to 6.0 and then will to go up to 7.5 However in my first attempt to go from V.5.1 to 6.0 this is hat happens: - The phone reboots - The phone then reads the file OS79XX.TXT from the TFP server. In the file I added the version "P0S3-06-0-00" - It starts upgrading firmware - Then I get the following message: (Upgrade Failed -

I upgraded my 7960 to sip v 6.3 and my display time has now disappeared from the top left corner. Loadid: SW: P0S3-06-3-00 ARM: PAS3ARM1 Boot: PC03M030 DSP: PS03AT38 Here is the section dealing with time in my SIPDefault.cnf file. Does anybody see anything wrong with it or have any other ideas? # Time Server (There are multiple values and configurations refer to Admin Guide for Specifics)

I have an *ipphone 7965G* which has to be connected to Asterisk. It has been flashed with SIP firmware but the config file doesn't seem to work maybe I am missing something in it. I appreciate it if you can share your working sample config file with me. Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL:

Anyone have experience with the 3-08-2 release of Cisco's SIP firmware? Are there any new features in the SIPDefault.cnf? Thanks, Ron

Hi All Total noob on the list so all help appreciated.... I've successfully installed Asterisk on an IBM A30P Thinkpad using fedora Core 2 (I'm looking at having a mobile PBX for conferences and shows). I've plugged in two Cisco 7960 phones.... The phones register with the Asterisk correctly and I can run the demo's and even the AIX demo through to digium works correctly.......

ala cisco 7960 -----Original Message----- From: Matt Schulte Sent: Thursday, December 16, 2004 10:34 AM To: 'Paul A Brown' Subject: RE: [Asterisk-Users] Cisco 7960 (SIP) hold problems Sure thing, the biggest problem I had was getting the SIP filenames working correctly for updating the firmware (blah, I love Cisco but these phones are a joke for support). This works for me! Good luck.

I have Asterisk version 1.0-RC1 running on Debian Woody. I have 1 analog phone working, 2 inbound lines working, X-Lite is working. The problem that I am having is with Cisco 7960 with SIP version 7.2 software. I can make outbound calls and they work fine, I even get a notice that I have voice mail on the phone and it seems to register properly but I can seem to dial to the phone.

Hi everyone, I've been toying with * for quite some time now. I've got two Cisco 7940's with the SIP firmware playing nice with *. I can also make outbound calls via IAXTel (toll-free calls only) and all other calls I have routed out my X100P-clone adapter. Here's my question... Is there a way to capture the inbound callerid from my phone line (coming in on the X100P) and have

Thanks But how about the config files (SIP...) that needs to be inside the tftp server, where can I get a sample of that? That's where the images for the firmwares of the ip phones come from, on boot right? -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Alen Salamun Sent: Wednesday, January 26, 2005 5:47

G'Day All. So I got the TFTP server all set up -thanks to much help from this list- the 7960 found it and updated to SIP the first firmware P0S30200. What I am now trying to do is upgrate through all the versions, as recommended, to the latest version, P003-07-3-00. I thought this would be accomplished by simply changing the sole line in the OS79XX.TXT file to P0S30203 and reboot the phone.

Hi, I can't upgrade an old 7960 from SCCP 3.0 to SIP 7.5. Could you help ? From http://www.cisco.com/en/US/tech/tk652/tk701/technologies_tech_note09186a0080094584.shtml#sccptosip2, I got the following: 1. Copy the desired binary image from Cisco.com to the root directory of the TFTP server. 2. Specify the image in the configuration file image parameter for the protocol

Hi! I have an automated dialout via a call file to a mobile. Can I detect when the call is not answered but forwarded to the mobile operator voicebox? I would like to stop the dialout if this is the case. TIA, Mike

Hi everyone, I'd say this question has come up and been answered before but I haven't been able to find it. I have a Cisco 7940 that I've upgraded to SIP firmware (currently P0S-3-06-3-00 - for some reason there was a failure when trying to upgrade to V7 so I left it at V6). The problem I'm having is that when I connect to voicemail the DTMF key presses dont seem to work

Hi, For a few weeks now, our asterisk server has been experiencing something very odd. From time to time, voicemail.conf would go blank. We finally tracked it down to happening when someone attempts to change their password. It seems the file is touched, but not written to, and we're left with a blank voicemail file. Permissions seem to be fine: -rw-rw-r-- 1 asterisk asterisk 12707

Is there a way to display the time of the 7960 running firmware 7.4? Im unable to find any information. Thanks, Ben Blakely -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060308/a7e575cc/attachment.htm

Greetings to all. I am hoping someone can help me out with a problem I am having getting my Cisco phones, 7960s and 7940s, to download the appropriate files from our TFTP server. The TFTP server is running on Fedora Core 4. The TFTP server appears to be setup properly: service tftp { socket_type = dgram protocol = udp wait =

Dear All, I'm trying to configure my new phone Cisco 7960 to work with asterisk. I followed http://www.asteriskguru.com/tutorials/cisco_7960_ip_phone_configuration.html and I got into the point where I can see on the the display line indication showing "55 <phone icon with x>" so it looks like the phone is not registered. The phone and the asterisk are in the same local

I am having difficulty with the calculation of the power law exponent for set of nodes within a graph. Specifically, I am interested in the distribution of in-degree and out-degree among communities of web pages where the web pages are the nodes of the graph and the hyperlinks the edges. According to the literature, the distribution of incoming and outgoing links obeys a power law distribution

Since we're chatting about tftp servers... Let's say I have a new customer with Cisco 79xx phones, and he desires to SIP register on my Asterisk system. I would have to provide the SIP<mac>.cnf and SIPDefault.cnf files on my tftp server for his phones. These files would be world readable, which I don't want. Is the solution to put the tftp server behind the firewall and

I'm currently looking to interconnect my Asterisk PBX system with the PSTN via a digital PRI/T1. I know a multitude of options exist for internal PCI cards (Digium/Sangoma/Rhino), I was wondering if anyone has any experience or recommendations of external PRI media gateways that support SIP. So far I've found: VegaStream Vega 400 Audiocodes Mediant 2000 MediaTrix 1531 However they are