I upgraded my 7960 to sip v 6.3 and my display time has now disappeared from the top left corner. Loadid: SW: P0S3-06-3-00 ARM: PAS3ARM1 Boot: PC03M030 DSP: PS03AT38 Here is the section dealing with time in my SIPDefault.cnf file. Does anybody see anything wrong with it or have any other ideas? # Time Server (There are multiple values and configurations refer to Admin Guide for Specifics) sntp_server: "172.16.10.24" ; SNTP Server IP Address sntp_mode: anycast ; unicast, multicast, anycast, or directedbroadcast (default) time_zone: EST ; Time Zone Phone is in dst_offset: 1 ; Offset from Phone's time when DST is in effect dst_start_month: April ; Month in which DST starts dst_start_day: "" ; Day of month in which DST starts dst_start_day_of_week: Sun ; Day of week in which DST starts dst_start_week_of_month: 1 ; Week of month in which DST starts dst_start_time: 02 ; Time of day in which DST starts dst_stop_month: Oct ; Month in which DST stops dst_stop_day: "" ; Day of month in which DST stops dst_stop_day_of_week: Sunday ; Day of week in which DST stops dst_stop_week_of_month: 8 ; Week of month in which DST stops 8=last week of month dst_stop_time: 2 ; Time of day in which DST stops dst_auto_adjust: 1 ; Enable(1-Default)/Disable(0) DST automatic adjustment time_format_24hr: 0 ; Enable(1 - 24Hr Default)/Disable(0 - 12Hr) Thanks, dbc. -- David Cook
On Fri, 13 Aug 2004 06:34:26 -0400, David Cook <dbc_asterisk@advan.ca> wrote:> I upgraded my 7960 to sip v 6.3 and my display time has now disappeared > from the top left corner.Funny enough my phone has done the same thing. I figured it was just a configuration error on my part and haven't had the time to really do anything about it. Hopefully someone will chime in with a solution (assuming its not just a configuration issue). Leif Madsen. http://www.asteriskdocs.org
Quoting Rich Adamson> > On Fri, 13 Aug 2004 06:34:26 -0400, David Cook > <dbc_asterisk@advan.ca> wrote: > > > I upgraded my 7960 to sip v 6.3 and my display time has now > disappeared > > > from the top left corner. > > > > Funny enough my phone has done the same thing. I figured it was > just > > a configuration error on my part and haven't had the time to really > do > > anything about it. Hopefully someone will chime in with a solution > > (assuming its not just a configuration issue). > > There was an open cisco item on DND and NTP interaction, and have > been > several issues relating to DNS. If your ntp definition uses DNS, I'd > suggest changing to an IP address. > > I've running v7.1 and have not ever had an ntp display issue. > > RichNope, IP addr used in the NTP config. Does anyone else use SIP 6.3 on their 7960 and the time display works for them? Can you supply your SIPDefault.cnf and SIPxx.cnf's? -- David Cook