similar to: OT - DECT-GAP Handsets with Polycom-Kirk 600/3 base station

Heya list, I need some advice/experience. Some of our customers are asking us about DECT solutions for their asterisk install. Some others will not go to asterisk if there won't be a DECT solution. They now have a Siemens or a Samsung PBX. Those PBX-es come with a DECT basestation and optionally repeaters etc. All those basestations speak some own protocol to the PBX, so we cannot use them

Hi, Do you if a DECT-GAP (or DECT-CAP) compliant handset MUST or MAY support roaming and handover and are these functions transparent for handset (then, these functions are implemented in DECT base stations) ? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080110/4254f602/attachment.htm

Hi list! Does anyone have experiences with the updated model of the Kirk IP600? The V3 model is supposed to support SIP instead of only SCCP or H323 which would make the use with Asterisk a lot easier. I have only tested the Kirk IP600 V2 with SCCP / Skinny protocol which is still giving me severe headaches : - the standard Skinny driver in * doesn't work, only the version of Sergio

Hi, I just got some interesting information from Kirk Telecom (www.kirktelecom.com). This company has been in the business of providing DECT solutions (IP gateway, base stations, repeaters and handsets) either to be used with Cisco CallManager (SCCP protocol) or with the Innovaphone IP PBX system (H.323). Two important elements: 1. It seems they foresee a SIP version of their product in Q1

Hi List! Does anyone have experience setting up this beast with Asterisk using Skiny/SCCP? I know that somebody on the list managed to get it working with H32H but in this setup it's not possible to transfer calls, quite annoying. I tried to set it up using the Cisco protol. With Skinny the phones register properly at * but I cannot get a handset to ring on an incoming call. The calling

Anyone have practical experience using inexpensive GAP-compliant DECT handsets with the Snom M3 basestation? When I asked Snom support, the answer was that 'basic functionality should work', but they didn't elaborate. I'm _guessing_ that means registering/unregistering with the base, making calls, and receiving calls (including presenting caller ID). They also stated that they

Hi, It seems to me that DECT Gigasets do not support MWI when connected to a Polycom/Kirk DECT base station : when a new message is dropped into user's mailbox, I can see a NOTIFY message sent by Asterisk to Polycom/Kirk DECT base station (here a KWS300) but Gigaset's handset MWI remains unlit. At the same time, a Polycom/Kirk handset subscribed to the same base station would turn its MWI

I'm going to try, Thanks very much Giordano -----Messaggio originale----- Da: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Per conto di Remco Barende Inviato: luned? 30 gennaio 2006 20.04 A: Asterisk Users Mailing List - Non-Commercial Discussion Oggetto: Re: [Asterisk-Users] Kirk IP600 Hi! Yes, it works (sort of) but I still have some issues.

Does anyone have a good resource to learn how to program the soft and hard buttons on a Cisco 7940 or 7960 phone? Using SIP Firmware...thanks. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060303/e5e63834/attachment.htm

I've added lines like this: speeddial = 123,test speeddial = 260,Bob in the [device] section for my 7921, but the speed dials do NOT appear on the menu (click right from the main screen). Am I missing something obvious here? Thanks MD -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, Does anybody try to connect KIRK System 600 IP to asterisk ? http://www.kirktelecom.dk/company/suk207.asp B.

Hi all, has anyone tryied to configure asterisk with Kirk IP600 Dect-IP gateway? Could it works using the skinny channel ? Thanks Giordano -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060130/07ec3c90/attachment.htm

Hello, Does anybody have already use TEDAS VoIP DECT PABX or some Kirk hardware to integrate DECT to VoIP? Thanks! Ignace

Now that I actually try and google for it, I can't find any dual mode GSM/DECT handsets, only pages telling me that they exist without any actual information!!! Does anyone know of any such handsets? (and even better, ones that are available in Australia) I've searched a few of the major gsm manufacturers (nokia, Panasonic, sonyericsson) but their web sites are absolutely pathetic to the

Hi! I want to detect brute-force password hacking attacks - thus if there are too many failed login attempts for a SIP account I want to "lock" this account. Does somebody have any ideas how this could be implemented? thanks klaus

Hey, Hi, All, We have a few dozen of the Kirk (ie: Polycom bought this European brand) out there & most all work very well & work very well with most all versions of Asterisk. But we have been tripped-up by one combination of firmware & version & configuration variables. We are running Asterisk 1.4.23.1 (TrixBox CE). We are running latest stable firmware on the handsets. Most

Just for some information really : How many of you use multiple sip lines on a phone ?. I'm sitting here looking at my 7960, with it's 6 lines. I've every only used one line, and I was wondering if I was a weirdo ;) The only time I've ever found a use was when I had two systems (production and test) and it caused so much grief (could have been asterisk or cisco) I simply use a

Polycom 601, hands down. - Brad -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Warren Sent: Thursday, June 15, 2006 10:05 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] Best $300 VoIP phone for asterisk? If you had approx $300 per phone as a budget and needed to buy

Hi list! Is anyone using the Kirk IP600/3 with SIP firmware connected to Asterisk? Any experiences / caveats? If anyone would be willing to share the dump of their IP600 config file, i would really appreciate it. Is there anything special i should put in my asterisk config? Thanks !!! Remco

G'day. I hope this isn't off-topic for the list. I am looking at an Asterisk setup that includes cordless phones. The three choices I can see, at this stage, are: * wifi phones * an ATA and a cordless analog phone * a DECT to SIP basestation The various wifi phone options don't grab us as suitable -- they are costly, have poor battery life and even the best have pretty mixed