similar to: R2 with Alestra in Mexico...

??? I am having a really bad day trying to get incoming calls to work on Asterisk 13 with PJSIP.? We just migrated from Asterisk 1.8 where everything was working but there seems that something got lost in translation.? No matter what I try I always get a 401 Unauthorized message when receiving a call from the PSTN provider.? I can make calls and the registration is working.? I have tried to

Miguel, How many simultaneous calls (incoming and outgoing) you did ? Kind regards, Miguel Date: Sun, 3 Oct 2004 11:21:04 -0500 From: Miguel Cavazos <miguel@cavazos.com.mx> Subject: [Asterisk-Users] Working E1 MFC/R2 M?xico !!! To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users@lists.digium.com> Message-ID:

I have an Asterisk server (1.4.13) using PRI in Monterrey, Mexico. This is really the first server I have used with PRI in Mexico as we normally use MFC/R2. Everything seems to be working except that some numbers always seem to be busy when you dial them. All these numbers belong to different phone companies. I know that with R2 this problem is present if you have a "#define

Steve, Do you know if there are many differences between the Mexican and Brazilian variant ? Kind regards, Miguel Antonio Date: Tue, 05 Oct 2004 22:51:53 +0800 From: Steve Underwood <steveu@coppice.org> Subject: Re: [Asterisk-Users] RES: Working E1 MFC/R2 M?xico !!! To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users@lists.digium.com> Message-ID:

For the past month I've been having trouble dialing certain numbers. We have Asterisk 1.4.14, Zaptel 1.4.7, Libpri 1.4.2 on a CentOS 5 server. We are using PRI on a TE110P card /etcwith a provider called Alestra in Monterrey, Mexico. There are some numbers that whenever we dial them we always get a busy tone. These numbers do not all belong to the same provider, but they all do not

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I have a astunicall-1.4 setup with a te110p to a nortel pbx in Mexico. (Hate R2!). This is what I get when trying to call to * box using testcall: ./testcall Chan 31, class 'mfcr2', variant 'mx,20,4', end 0, caller 0, from '' to '' Loading protocol mfcr2 Thread for channel 0 MFC/R2 Chan 31: Call control(9) MFC/R2

I have a server running Asterisk 1.4.14, Zaptel 1.4.6, Libpri-1.4.2 on a CentOS 5 server. The server has a single TE110 card connected to a provider called Alestra in Monterrey, Mexico. Since we installed everything we have been having problems dialing certain numbers, those numbers always fail when dialed from Asterisk but if you dial from your cell phone they always go through. I once has a

Hi, I've been trying to dial out to a cellphone, but all my calls get redirected to 066 (the emergency number at my city, like 911) does anyone know how to fix this, any ideas,? does anyone from mexico has done this? Any comment will be highly appreciated, Regards, Claudio -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi guys, I have one E1 with 30 channels in Mexico City, I guess that if i can fill this 30 channels with REAL traffic for 2 or 3 days I can find new bugs on chan_unicall or I can see how stable it can be. Im using R2/MFC with chan_unicall the patch that Steve Underwood wrote. I will let anyone make FREE LOCAL calls to Mexico City till saturday or maybe until monday to see how stable this can

Hi I have one question, somebody can tell me if the card TE110P work in mexico, and maybe can tell me the config. Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050923/9dedf2bc/attachment.htm

After I have finished to key in the area codes for Mexico I would like to propose: The guy how created the numbers should be stoned to death with the dice he created the numbers !!!

Hello, I have a problem with movistar in Mexico with a sip calls. Movistar send to me T38 and G729 in the INVITE and they say that I have to ignore T38 and use G729 in the voice call. When a fax call is made Movistar send only T38 in the INVITE. Invite example: v=0 o=GDL-BMSW-12D 19913379 19899826 IN IP4 192.168.1.2 s=sip call c=IN IP4 192.168.1.2 t=0 0 m=audio 6370 RTP/AVP 18 101 a=fmtp:18

Hello everybody, i'm from Mexico, at the time i?m working on a production server with asterisk 1.2.25 + spandsp-0.0.4 + libmfcr2-0.0.3+libsupertone-0.0.2+libunicall-0.0.3 and zaptel-1.2.22. I installed this version of astunicall that i downloaded from http://www.moythreads.com/astunicall/ Everything works fine, i'm able to make outgoing calls and recive incoming calls with all ANI and

Is there a way to busy out a Zap channel? I have a customer who is having problems with a line connected to a TDM800 card and we would like to busy out that line. Since that line is the head of the hunt group I cannot simply disable that channel, I need to busy the line so calls will come over the other lines. -- ?Telecomunicaciones Abiertas de M?xico S.A. de C.V. Carlos Ch?vez Prats Director

I have a customer that needs an Asterisk server to sell minutes for cell phones in Mexico. I do not see a problem with that since he will get the calls by SIP and then use GSM adapters to get the calls into the GSM network. My problem is that his customers only want to be identified by IP and not by a username and password. Is there a way to authenticate just by using an IP address? --

Hello All, Does anyone know of a software emulator that can be used to simulate hardware such as an E1? I need to play with AstUnicall in a test environment and don't have access to these circuits from the US. If there is an alternate way to test/play with AstUnicall, please let me know! Thanks, Mark -------------- next part -------------- An HTML attachment was scrubbed...

I've been trying to configure an E1 in Mexico using unicall, i went into vozdigital, googled this list, and finally followed this instructions: http://voip-info.org/tiki-index.php?page=Asterisk+MFC+R2 I have 10 PSTN numbers and 10 "lines" assigned, so i only have 10 "channels" assigned from my telco. However when i try to simulate a call using this call file: --------call

I have a customer that is complaining that any call coming in from Nextel gives a fast busy. We are running Asterisk 1.4.7.1 with Zaptel 1.4.3 and all the MFC/R2 patches and libraries. All other calls go out and come in, just Nextel seems to have this problem. The phone company technician connected a PBX emulator on the line and that one could receive the calls from Nextel. The E1 is provided

Hello everybody, using the lmer function, I have fitted the following logistic mixed regression model on an experimental data set containing one fixed factor (Cond) and three random variables (Sito, Area, Trans): > model<-lmer(Caul~Cond+(1|Sito)+(1|Area)+(1|Trans), data=dataset, > family=binomial) this is the output: > summary(model) Generalized linear mixed model fit by the

Hey all, I was wondering if anyone knows about a Mexican ITSP I can connect to to route calls from and to my * boxen. If it matters: I'm located in The Netherlands and one of our customers is in Mexico so if we need a Mexican presence that is not an issue. Thanks. -- Michiel van Baak michiel at vanbaak.eu http://michiel.vanbaak.eu GnuPG key: