similar to: PRI ISSUE

Hi all, as good? I am trying to go up a board TE110P with link E1 ISDN PRI to establish connection with a central office Siemens HiPath 4000. But I am having the following errors: Server1:~ # asterisk -r Asterisk 1.2.10, Copyright (C) 1999 - 2006 Digium, Inc. and others. Created by Mark Spencer <markster@digium.com> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'show warranty'

---------- Forwarded message ---------- From: Jan Prunk <janprunk at gmail.com> Date: Sep 13, 2007 3:35 PM Subject: Bad FCS error To: asterisk-users at lists.digium.com Hello ! I am getting the following error in asterisk logs: Sep 11 17:33:30 NOTICE[2187] chan_zap.c: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1 Sep 11 21:45:08 NOTICE[2187] chan_zap.c: PRI got event:

Hi, We have integrated an Asterisk system (built from CVS HEAD) with an Avaya IP Office switch running Q.SIG on an E1 interface, using a Digium Wildcard TE110P. The system is being used for handling both inbound and outbound call traffic to a set of Asterisk agents who are connected via extensions on the IP Office - there is a maximum of 15 agents at any one time, allowing at least another

I just upgraded my asterisk install from january 2005 CVS HEAD to current CVS HEAD : * zaptel * libpri * asterisk My asterisk have one TE405P with one span (the clock source) pluged into a telco PRI E1, a second span is a PRI E1 to another PBX and the third one is a T1 to a rhino channel bank. Everything went smoothly except that the two PRI span restart every ten seconds after some HDLC

Hi everyone, I have been having some problems lately with our PRI and Asterisk, or maybe it is just me. It happens once maybe twice a day, but when some of our customers are calling in, the phone just drops on them. I pulled the information below from the log from one that happened. I notice why it is happening, but I can't seem to figure out a way to stop it from happening. I also

Hi I am trying to connect asterisk with a Cisco GW 2600 with E1 pri using a Digium, Inc. Wildcard TE210P dual-span T1/E1/J1 card 3.3V (rev 02), Errors: [Jan 28 17:32:33] VERBOSE[6182] logger.c: == Primary D-Channel on span 1 up [Jan 28 17:32:33] WARNING[6182] chan_dahdi.c: PRI Error on span 0: We think we're the CPE, but they think they're the CPE too. [Jan 28 17:32:34] NOTICE[6182]

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I've been seeing some strange issues recently as it relates to our Asterisk phone system. Let me give a little background on things: We have a T1 provided by Knology. We recently had an outage of Internet and phones. The following problems (except for the log messages) seemed to have cropped up after the outage. I was prompted by a friend of mine

Greetings to all, I am getting the following error on my PRI-connected Asterisk box, and am just wondering if anyone else has seen this, and if so how they solved it. Jan 18 10:10:23 NOTICE[6070]: chan_zap.c:7428 pri_dchannel: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1 Jan 18 10:10:24 NOTICE[6070]: chan_zap.c:7428 pri_dchannel: PRI got event: HDLC Bad FCS (8) on Primary

Hi There. I have the following setup : Asterisk 1.2.4 , freePBX 2.0.1, spandsp-0.0.2pre24 My problem is as follows : If I set up a very simple extensions.conf. when I dial from a fax machine, it seems as if no fax is being recognised. If I answer the call, I can hear the fax machine beeping. extensions.conf :

I am trying to test out my PRI configuration on a server by conection another asterisk server to it. I have the T-1 cards up and both set to bchan=1-23 and dchan=24 in zaptel.conf I am getting lost on the signalling in zapata.conf. using pri_cpe makes sense for my target box, but I am getting the following errors on my source box if I use pri_net or pri_cpe signalling. May 31 17:15:06

Hi Folks, I'm have Asterisk version 1.2.1 with a A101 PRI card. I'm working with the CLEC to bring up the PRI and inbound calls are hanging up at his end after a few seconds. I ran PRI debug but it only gives me minimal insight. " Ext: 1 Cause: Unknown (16), class = Normal Event (1)" He ran a trace and the only difference he is seeing is a "ISDN interface explicitly

Hello, All! It is a Piece of my log At the moment of a call: Jan 9 09:50:21 NOTICE[10902]: chan_zap.c:8194 pri_dchannel: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 3 -- Accepting call from '' to '0033444' on channel 1/1, span 1 -- Executing Dial("Zap/1-1", "SIP/3444|60|rgT") in new stack -- Called 3444 -- SIP/3444-0823e6b0 is

I'm running asterisk 1.0.3 and seeing occasional messages on the asterisk console that say: Dec 18 09:09:55 NOTICE[26411]: chan_zap.c:7381 pri_dchannel: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1 or Dec 18 09:25:46 NOTICE[26411]: chan_zap.c:7381 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 They don't see to have a noticeable impact

Hi!, this issue makes me crazy. I read a lot of docs, also * mailling list and I try a lot of things without success. Any help will be appreciated. Here is the info: Hardware: -------------------------------------------- Supermicro Server with motherboard X7DB8, chipset Intel 5000P, Xeon 5050 Digium TE110P Software --------------------------------------------- Asterisk version 1.2.12.1

Hi friends, Where can I get some information to understand messages like the following ones? *NOTICE[6455] chan_zap.c: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1* *NOTICE[6455] chan_zap.c: PRI got event: HDLC Abort (6) on Primary D-channel of span 1* * ERROR[6455] chan_zap.c: !! Got S-frame while link down* *ERROR[6458] chan_zap.c: !! Got reject for frame 27, retransmitting

I receive this error on the asterisk console and it is pretty much ALWAYS coming up. Sometimes there will be a break where it does not display. We had our PRI provider test the lines and they claim that there is no signalling problem. It doesn't matter if there are no calls or if there are 10 calls in progress the error is still displayed. I also get an annoying popping or clicking sound

Hi, Does anyone have any good empirical data suggesting what the maximum number of PRI calls (incoming and outgoing) without hardware echo cancellation can be handled on a single box is? I have a TE410P T1 (1st gen) card and I'm seeing interesting errors of D-Channels going down and then coming back up (See below). I've looked at the number of simultaneous calls at each of these points,

Can anyone help and point me in a useful direction. I'm using * 1.2.4 with Zaptel 1.2.4. I have a TE110P card and it's a Supermicro P8SCT mobo. If I run the PRI card in the PCI-X slot it shares an interupt with eth0 but I don't get problems. I've been trying to move it onto it's own IRQ, by moving the card to a regular PCI slot but I now get the errors Mar 2 08:43:09

I hope someone can help me out with this issue. It has been dogging me for months and I can't seem to get it to go away. I have a Rhino Ceros box running Asterisk 1.4.21.2 connected via eth0 (nVidia MCP61 Ethernet) to a RedFone FoneBRIDGE2 dual-port with EC. The FB is the latest hardware rev and the latest firmware. I'm running the latest fonulator version and I'm running Zap-1.4.11

Hi, I facing a problem with flash hook. When ever I do a flash hook to place an extsing call on hold, the call gets disconnected. The debugs on Asterisk shows that 'on hook event detected' when I press the flash button on the phone. The setup is like this Asterisk box with T1 cards and FXS cards. The T1 card is connected to an IAD and configured for ISDN PRI lines. Analog phones come