similar to: PRI Alarms, Comes Back, But Asterisk Won't Touch It!

We have a server with a TE120 on a partial PRI trunk that several times a day declares the PRI trunk down and stops handling calls until the asterisk is stopped, the zaptel/te120 modules reloaded, and asterisk started. Just before things go down, the log shows the following error: ERROR[9424] chan_zap.c: Write to 28 failed: Unknown error 500 at which point a "show pri spans"

The Vancouver Linux User Group is holding a "Virtualization Round Table" Monday (Feb 18) evening at the BC Institute of Technology discussing some of the different approaches to server virtualization. I'll be speaking about using OpenVZ to provide virtual servers used to host multiple instances of Asterisk (the technology behind our Virtual Private Asterisk Server or VPAS

"Annoying that people aren't following the directions and only entering 3 digits, but we've had some high level meetings here with a string of clients coming through in an unusually compressed frequency. And I've had 5 complaints over 2 days that callers couldn't find Jane Smith." - George Pajari (dCAP), netVOICE communications 604 484 VOIP(8647) x102

From c|net News: "On Monday,Microsoft and nine leading phone manufacturers--Asustek Computer, GN, LG-Nortel, NEC, Plantronics, Plycom, Samsung, Tatung, and Vitelix--announced the public beta program for Microsoft Office Communications Server 2007 and Microsoft Office Communicator 2007." http://news.com.com/8301-10784_3-9719931-7.html?part=rss&subj=news&tag=2547-1_3-0-20 --

I need to accept an incoming call, make a series of outgoing calls, and once I find someone willing to accept the call, bridge the original incoming call to the outgoing call. Using Dial from an AGI script isn't enough because once the Dial'ed number connects, the call is immediately bridged and I need to ask the called party if they will accept the call. I can see a couple of

I wrote earlier: > Please tell me the obvious mistake I'm making here.... The problem was a lack of sleep. Sorry to have troubled the list. -- George Pajari, netVOICE communications 604 484 VOIP (484 8647 x102) Open Source VoIP/Telephony Specialists 1 877 NET VOIP (638 8647 x102) www.netvoice.ca www.ip-centrex.ca www.digium.ca www.grandstream.ca

We have a customer with an obsolete Centigram voicemail system who would like to replace it with Asterisk. Any one with experience doing this or information on the signalling and trunking used to connect the Mitel SX-2000 to the Centigram server? -- George Pajari (dCAP), netVOICE communications 604 484 VOIP(8647) x102 www.netvoice.ca www.ip-centrex.ca www.digium.ca

Attempts to perform a "make all" in /usr/src/asterisk/channels/h323 fails with countless errors of the form: /usr/src/pwlib/include/ptlib/ptime.h:152: macro or `#include' recursion too deep In file included A "make all" using the stable branch builds with the same pwlib code but of course the h323 code in the stable branch doesn't work. So it seems those of us who

We're having a problem with an E1 trunk in Mexico into an IVR server and would appreciate any suggestions. Hardware: Digium TE110P jumpered for E1 zaptel.conf: span=1,1,0,ccs,hdb3 # clear=1-30 bchan=1-15 bchan=17-31 dchan=16 loadzone = us defaultzone=us Circuit status is fine: Status: Provisioned, Up, Active Calls are accepted by Asterisk without any

We're trying to use some AudioCodes MP104 FXO units as gateways to Asterisk but cannot get them to reliably detect DTMF. Some landline calls get most digits but some are duplicated. Some cell phone calls get 0% DTMF recognition. Anyone with experience with these units have any suggestions? ABP Technical Support has been unable to diagnose the problem and is now sending random guesses and

Trying out SVN-oej-t38passthrough-r12677 on a server that also needs to pass some calls to another using IAX and attempts to use the Dial command results in multiple messages "Out of idle IAX2 threads for I/O, pausing!". Since this server needs to support IAX I'll have to back out this version and find another idle server to use to play with the T.38 code. g. -- George

Please tell me the obvious mistake I'm making here. (And yes, I well know about NAT and one-way audio problems in general.) I want to try the new T.38 passthrough stuff, downloaded it, built it, tested it with an SPA-2100 and can hear announcements fine but echo test shows no audio outbound (i.e. SPA to Asterisk). Registered the second SPA-2100 channel with an Asterisk 1.0.10 server in

We are testing the new T38 passthrough code (SVN-oej-t38passthrough-r13347): - we are using a Sipura SPA-2100 as the T.38 user device - we are using a Patton SmartNode 2400 as the T.38/PRI gateway - we are using Asterisk in the middle We have the following in the [general] section of our sip.conf: t38pt_udptl = yes t38pt_rtp = yes When a fax call comes in from the SmartNode to Asterisk

Hello List, We purchased a TE120P card from Digium and it works great. The only problem is that we are still experiencing echo on some calls. I've tried various echo cancellers (right now we are using OSLEC) and still no luck. My question has anyone gone from the TE120P to a Sangoma A101D-X Single Port T1/E1/J1 w/ echo cancellation? Have you noticed a difference? Also I called

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> <meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type"> </head> <body bgcolor="#ffffff" text="#000000"> I have an Asterisk 1.4.18 with a mix of cordless phones connected using Linksys SPA2102 ATAs and Cisco 7940G

Hi all, I'm confused, in digium website, it says: TDM2400P: It supports a combination of up to 6 FXS and/or FXO modules for a total of 24 lines. 6 plus 6 is 12, how come it's 24? if I have 24 PSTN lines, i'll be needing 24 FXOs. Pls. elaborate. thanks. Lito -------------- next part -------------- An HTML attachment was scrubbed... URL:

We have a customer considering migrating from a large Nortel PBX with a third-party voicemail system to Asterisk but one of the features they really like is the automatic synchronization of voicemail between Exchange and their voicemail system -- delete a message from the voicemail system and it is deleted from their email inbox and vice versa. Searching has not revealed anything like this

I'm looking at switching VOIP providers, but want to ensure I move to a company with sufficient capacity. Can any Canadian VOIP users post/email me with feedback on their providers? I'll post the results for all to read...... -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello! In my relentless quest for knowledge, I pose this question: who's got the biggest dialplans, and how big are these monsters? What's the biggest dialplan in use right now? If you feel you are a competitor, let me know how many contexts/extensions/priorities you are dealing with. Maybe the context with the most extensions, the extension with the most priorities would be

I am looking for an ATA that has had very reliable results when passing FAX over IP. I was thinking of testing the Cisco (not Linksys) ATA 186 I1, ATA 186 I2, ATA 188 I1. This is what I'm looking for: FAX -> PTSN -> through Asterisk -> ATA -> Fax Machine. I have QoS from PSTN entry to ATA on the network so I can assure precedence. What has everyone out there been using