similar to: CHANUNAVAIL

Hey guys, I have stdexten macro dialplan and I have to handle those who doesn't have voicemail box setup. Right now if someone call and if person unavailable the it's just hangup that call. I want it say "person doest have vm setup yet." smthing like that. How should I handle this in my dialplan ? -- Sent from my iPhone

Running Asterisk 1.2.8 kernel 2.6.13.4-1. Everything in my dialplan seems to be working well except for one problem. When calls are blind transferred to an invalid extension I would like the call to go to the operator on ext 1000? What is the best way to do this? Thanks in advance Here's a snippet of my extensions.conf [default] exten=>_10XX,1,Macro(stdexten,${EXTEN},SIP/${EXTEN})

I am running 1.4.10.1. I have a macro that is called from default for a certain extension (both below). I added NoCDR to s to try and stop extra CDR records, but I am still getting them. Any idea how to stop them? extensions.conf: [macro-STDEXT] exten =s,1,NoCDR() exten =s,2,Dial(${ARG1},30,Tt) exten =s,3,Goto(s-${DIALSTATUS},1) exten =s-NOANSWER,1,Voicemail(${ARG2}|u) exten

Greetings to all, I ma having a problem with channel variables on a couple of our Asterisk boxes. Here is the setup. Asterisk on customer's site (1.2.5), using IAX to our external GW (1.2.5), IAX to PSTN GW (1.0.10), E1/PRI to PSTN. On the External GW, we also have an IAX trunk to a VOIP provider if for some reason the E1 is down. If the DIALSTATUS is CHANUNAVAIL, which should be

hi ppl, i'm using asterisk 1.2 because i'm making use of voiceone, but before i was using asterisk 1.4 and had the same problem, it concerns an italian voip/sip provider called eutelia/skypho, my problem is the following one: when i start my pbx my skypho account is working fine, meaning that e.g. incoming calls are shown in the asterisk CLI and caller and callee can hear each other when

Just throwing this out here, hopefully someone can tell me why. *CLI> show version Asterisk CVS-HEAD-11/17/04-10:16:38 built by root@wanderer on a i686 running Linux Zap/g1 is pri_cpe to Bell Canada 5551234 is a normal POTS line I have busied out (handset offhook) exten => 1234,1,Dial(Zap/g1/5551234,,g) exten => 1234,n,NoOp(HANGUPCAUSE is ${HANGUPCAUSE} and DIALSTATUS is

Hi, I'm using the macro below in extensions.conf for most of my outbound calls. One issue with my current configuration is that when I make an outbound call it doesn't properly detect that my PSTN line (Zap/1) is busy with another call and then overflow to my outbound IAX connections. I think the root cause is that DIALSTATUS gets reported as BUSY. The debug output is below. My desired

with the below defined in logger.conf on 11.6 cert 6 I am not getting any log message other than notice and warning in any files when doing module reload logger - queue log is the only one that says it restarts *CLI> module reload logger == Parsing '/etc/asterisk/logger.conf': Found Asterisk Queue Logger restarted built fresh box with make samples - added 2 stations, dialing from

I'm trying to set up my extensions.conf file using some of the existing macros like stdexten, etc. while at the same time having two logically separate virtual PBX's (with no "default" context) and two trunks coming into separate contexts, i.e. one for residence and one for my at-home business. I noticed, however, that macro-stdexten depends on the "default" context:

Dear, I have this scenario: - PBX Asterisk 1.6.2.10 with private IP 192.168.0.10 - Behind a Cisco ASA firewall that connects to Internet - SIP trunk to Net2Phone with these parameters (nat=no): host=200.58.113.60 username=DOLLY secret=123456 port=5060 type=peer dtmfmode=rfc2833 disallow=all allow=alaw&ulaw nat=no canreinvite=no qualify=yes -Softphones Xlite The PBX can't register to

AsteriskNOW 1.4.26.2 with a Digium TE205P connected to an ISDN PRI (single span). I'm sure I just have something goofed up in the dialplans? I have a bunch of Polycom 331 IP phones connecting to the server. I can dial the other extensions in the system fine and I can dial long distance outgoing but cannot seem to get it to dial local (7 digit) calls. I see this in the CLI: --

Hi This is the output from show dialplan dial-sipmnf-sippt-pstn [ Context 'dial-sipmnf-sippt-pstn' created by 'pbx_config' ] 's' => 1. Verbose(1,Dialing ${ARG1} on mnf pt pstn) [pbx_config] 2. Dial(SIP/${ARG1}@${SIPMNF},${ARG2},${OUTBDIAL}) [pbx_config] 3. Set(GLOBAL(FOUNDME)=${DIALSTATUS}) [pbx_config]

I encountered this strange problem which is I can call into Asterisk box but I cannot call out. I was successful before using exactly the same euroISDN line but with TE110 and different versions of Asterisk. This time, I am using: . TE410 . Asterisk 1.4.13 . Zaptel 1.4.6 . Libpri 1.4.2 1) I put the following into extensions.conf to get to the outside line exten => 0,1,Dial(Zap/1) 2)

Hi. I'm dialling two numbers - one that's unobtainable, one that's busy. ${DIALSTATUS} is coming back ANSWER each time right before the channels hang up. Am using the following dialplan macro to dial out. [macro-advdial] exten => s,1,Dial(${ARG1},20,g) ; Ring the interface, 20 seconds maximum exten => s,2,Goto(s-${DIALSTATUS},1) ; Jump based on status

Does anyone know what this error message means? Unable to create channel of type 'DAHDI' (cause 0 - Unknown) I've upgraded to 1.6.0 with dahdi 2.0. For some reason my outbound dahdi calls are not going through. At some point, it starts to work, but I don't know what the trigger is. Out of the blue, outbound calls start to work. I had been using asterisk-1.6-beta9 with zaptel

Hi, We have been migrating our PBX system from Asterisk 1.8 and chan_sip to Asterisk 13 and chan_pjsip. Things are mostly, ok, but now I have stumbled on a behaviour difference I don't like. With chan_pjsip when a phone went unexpectedly offline (Ethernet cable disconnected) Asterisk would detect this quickly (through the 'qualify' pings), mark the phone as 'Unavailable' and

Source: xen-api-libs Version: 0.5.2-3 Severity: serious Tags: jessie sid User: debian-qa at lists.debian.org Usertags: qa-ftbfs-20130620 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: > make[2]: Entering directory `/?PKGBUILDDIR?/stdext' > ocamlfind ocamlc -I ../xml-light2 -I ../stdext -I

Hello I've been having the following problem today : I have a quite simple dialplan made to receive a fax: [answer-extension] exten => 1,1,Answer exten => 1,2,Macro(setcallerid) exten => 1,3,Ringing exten => 1,4,Wait(3) exten => 1,5,Macro(stdfwd3iax-notransfer,${EXTENSION},${EXTENSION},$ {EXTENSION}) exten => fax,1,Goto(faxreceive,1,1) The Wait(3) is there simply to let

hi ppl :D my configuration is as follows, i run (let's call it machine 2) debian etch 4.0 and asterisk 1.2, i use voiceone (www.voiceone.it) as an interface to manage asterisk, I have a grandstream/handytone 486 as a sip device, no PSTN line or anything like that all SIP only. I have a machine (machine 1), which functions as my router and machine 2 and sip device are behind it, grandstream box

Hello I used to have an extension like this which worked fine with asterisk 1.0.7 I first dial to see if an IAX phone is present, if not I would try on SIP instead exten=s,1,Dial(IAX2/iax${ARG3},20,tr) ; 20sec timeout exten=s,2,Goto(s-${DIALSTATUS},1) ; Default action exten=s,200,DBget(temp=CFBS/${ARG1}) ; Get CFBS key, if not existing, goto 301