similar to: Polycom 601 + Headset

I'm hearing an echo when using a headset with my IP 501 / 601. The phones are using BR 3.1.2 and SIP 1.6.3. I use tftp to configure the phones. The sip.cfg is the default from polycom except for the parameters required to connect the phones to asterisk. I have absolutly no echo with the handset, but do have a slight echo on the speaker phone. I haven't ruled out room acoustics as the

Good morning, I have a Polycom 601 with two side cars. I created a list of contacts in XML and it shows up on the side cars exaclty how I set it up in the XXXXXXXXXXXX-directory.xml file (in the order that I wanted it etc.). However when I hit the directories button and then contact directory I see the list in alphabetical order based on the last name. I want it to show up in this list as well in

Hello again, I am using mix monitor and the majority of the sound records perfectly. I then get a "Internal Data Stream Error" near the end of the sound file. Has anyone ever seen this? I am allowing the ULAW amd ALAW codecs and an example dialplan entry is ; ; phone line phone1 exten => phone1,1,Answer() exten => phone1,2,MixMonitor(test.wav|av(0)V(0)) exten =>

Hi, I've been asked for a headset recommandation for Polycom SoundPoint IP phones. Since I believe they use a pretty standard headset jack (correct me if I am wrong) it's really a general recommandation on headset. Regards, Mike -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi I am looking for a good wirless headset to use with the Polycom Soundpoint 501 phone. I would greatly appreciate hearing from anyone with good experiences with a specific device. Thanks -- Jim Freeze

I like the Plantronics CS55/HL10, it's a DECT Wireless boom headset with a lifter kit for the phone, works like a charm, great range. -Cory -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Jim Freeze Sent: Wednesday, October 25, 2006 2:31 PM To: Asterisk Users Mailing List - Non-Commercial Discussion

Tom - here are a few suggestions Plantronics 510SL Bluetooth - they make a bundle that comes with a Bluetooth transceiver and a handset lifter. This is nice if you have users that already have Bluetooth headsets for their mobile phones, as it allows you to sync with their office phone as well. http://www.plantronics.com/north_america/en_US/products/cat29880043/cat2 9880054/prod5460016

Hi, I have questions about the Polycom 601 and side card.... 1) In the side card the lights all time off... But all functions it's ok. I need help with extension module of polycom... All works fine... But lights not work.... So... I don't know when any person or extension is busy... Any ideas? , Olger On 3/27/06 11:34 PM, "asterisk-users-request@lists.digium.com"

RJ11 Plantronics 1 3 2 4 3 1 4 2 RJ11 Pin 1 is on the left when looking at the contact points. Plantronics Pin 1 is on the left when looking at the contacts (through the plastic sheild) My multimeter battery is low, so YMMV, but: Pin's 1,4 are connected with ~160 ohms Pin's 2,3 are connected with ~1400 ohms On my Plantronics head set. Chad -----Original Message----- From:

Hi List, I have a Polycom 601 that when the user is on the phone they only hear one beep and the CID of the second incoming call is not shown. Is there a way to have the CID show up for the second call ? And a way to configure the phone to beep more often if there is another call coming in. The problem is that if the receptionist is on the phone and looking up something on the PC she some times

I have been looking for analog phones for my * system that work with our plantronic amplifiers and headsets. The problem I am having with the Aastra phones that I have purchased (PT-390, 9116, 9120, 8009 ), is that they don't seem to stay hung up unless you physically hang up the handset everytime you finish a call. I have even purchased the Aastra 9120 which sais it has on-hook

Hello! I am selling hardware I have been using in various Asterisk test installations. If you are interested in buying all or any of the following items please reply off list. I got a few * X100P clones * Sirrix PCI4S0 ISDN BRI cards (+ 1 Sirrix S0 voltage/power supply) * 1 Polycom Soundpoint IP 500 (+ Plantronics headset) * Conrad HFC-S cards to give away. Some of the pieces are unused,

Hi everyone, I have a user that needs a little extra volume on his Polycom IP 601 phone set for all calls (beyond what the volume control currently offers). Is there a provisioning setting for this anywhere? (I'd like to avoid a separate amplifier between the phone and handset if possible.) Alternatively, is there a way to have Asterisk 1.4.x boost the volume to a particular SIP device

I have been testing with Polycom IP600 phones for a month or so. I found out that there are frequent problems with the handset. The problem is I can hear the other end but the other end cannot hear me. I have already downloaded the latest bootROM 3.1.3 and sip 2.1.2 However, there are no problems with the headset or speaker phone. Has anyone encountered such problems before? Thanks.

Hi Guys, I have some Polycom 601's here. It is super annoying that the phone every so often beeps to let me know that I have a VM. Is there any way to turn that off ? (I just want the red led to blink that there is a VM). Thanks. Dovid -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, You need to have completely replaced the Microsoft driver, because it doesn't support the headset or ctp Bluetooth profiles. This gave me fits! I followed the instructions at http://www.windowsdevcenter.com/pub/a/windows/2005/07/05/bluetooth.html and it works with both a Plantronics and a Motorola Headset, and I can answer calls with idefisk, eyebeam, x-lite, and kapanga. If you end

I have seen on eBay adapters for Cisco 7940/7960 phones, to use cell phone headsets. They were about 12-15$. I think original manufacturere was at http://www.ciscoheadsetadapter.com. >Started a Wiki page here: > > http://www.voip-info.org/wiki-Cisco+Phone+Headsets > > >Jim > >James H. Thompson >jht at lava.net > > ----- Original Message ----- > From:

Wondering if anyone has any tweaks to get optimum headset sound quality with polycoms? atm i'm trying changing the gains, aes & aec, in imipmid.cfg headsets are unamplified, UNEX & GNetcom using G729 codec with SIP 1.4.1 firmware Thanks Walter _________________________________________________________________ Express yourself instantly with MSN Messenger! Download today it's

I am having the same issue as below. Has this issue been solved or does anyone know an answer? This error recently began and we have multiple phones out of commission. PLEASE HELP!! http://lists.digium.com/pipermail/asterisk-users/2006-August/162841.html How did you find out about 468*??? It's sure as poop not documented in the Polycom Admin Guide anywhere. -----Original Message-----

What headsets have people found work well with the Polycom Soundpoint 500 & 600? If any of the headsets that work with the Polycom's also work the Cisco, that would be an added bonus, but is by no means a requirement. I am not looking for a headset that requires an external amplifier, but rather a headset that can make use of the headset jack on the phone itself.