similar to: First Time T1 Questions

Hi, I am getting a new sangoma t1 card soon and that will max out my slots, which means i need to take out a card. I am going to take out my pci network interface card (10/100) I have an open pci-e slot i have never used in the machine so i am going to buy a pci-e 10/100 or gigabit network adapter. I want to find one that works natively with the linux kernel. I hate using hardware that

hi, i just installed 2 new tdm410p's on asterisk 1.4.19 with zaptel 1.4.10. They have the hardware echo cancellers. I am having an issue though, when i talk, it cuts out the other end. So for example, i called up another asterisk box and was listening to the prompts and as they were playing if i said something, it would cut out the other end. so i basically started counting and for the

Hi all, i am having a major asterisk problem. I think it started around 1.2.19 but could also be 1.2.18 zaptel or 6.5.10 snom 360. basically we start getting busy signals, all our 4 line hunt group is busy, i then check the channels and there are open calls that were hung up long ago. i thought it was a zap problem but then i saw the same problem with iax2 calls. its becoming a huge issue

Hi List; Is Digium the best telephony cards to be used with Asterisk? The prices are some how high, any suggestion? Regards Bilal ____________________________________________________________________________________ Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs

Hi, I am having some major problems with 2 digium cards in two seperate servers they are both TDM400P cards one has 4 fxo ports and the other has 1 fxo port. First problem, the card with 4 FXO ports is fine until there is a storm in the area, then all 4 lines are massively static filled making phone calls barely understandable until the system is rebooted or the zaptel modules are unloaded and

I am running 1.2.5 with a simple queue and have announce-holdtime = yes in queues.conf for that queue. The person is being told their posistion in the queue and the CLI says the estimated hold time, but it never plays it for the caller. It worked previously, i am not sure when it stopped, i think after 1.2.1. Is this a known bug? I dont want to report it to the bug tracker if its already been

Hi, i am having a problem with my point to point t1, which is being resolved and is a seperate issue. sangoma support has been a huge help and i am waiting on verizon to increase the signal output of the smartjack. But my issue is that in the meantime my fallover extensions arent working. Well they are on the CPE side but not on the NET side. The NET side still thinks its making calls, they

A while back i had asked about possible replacements for snom 360 phones that were breaking and causing issues and we all discussed the problems we had with the 360s and some suggestions were made but the new polycom phones had just hit the market and not many people were able to comment on them. Basically i am looking to get some new phones and in the process get rid of the countless number of

Hi all, i am trying to setup my first t1 in asterisk, i have been using asterisk for several years but ahve never needed a t1 line before. I have a sangoma card already in the server with 4fxo ports. Now i ordered two single port t1 line cards from sangoma for the two servers i am connecting with the point 2 point t1. I am currently at the location trying to set things up but have some

Hi all, I am a huge fan of Sangoma cards after having many problems with digium cards and then switching to sangoma cards and them giving me excellent support with excellent results. That being said, they are also alot more money than the Rhino cards and my friend currently has 1 digium 4 fxo card in their system and they need to add another phone line, plus they have echo problems and quality

Hi i have a friend who i setup an asterisk system for at his doctors office. it has 3 snom 360 phones with 6.2.x stable firmware and latest asterisk 1.4 and zaptel. They have the digium 4 port fxo card. They are extremely upset because calls are being randomly bridged for no rhyme or reason. They say that callers will call in and sometimes get connected with other callers, or they will be in

Is anyone using the SNOM 360 as a reception console with Asterisk? We are trying to have the ability to view whether an extension is on or off hook, or ringing with the Snom, which seems to work fine. The issue is that we are having difficulty picking up calls and transferring. Anyone have experience / insight? Darrell S. Long Director of Technology BestWeb Corporation Phone 877-777-2932

---------- Forwarded message ---------- From: Marco Mouta <marco.mouta@gmail.com> Date: Feb 15, 2006 1:58 PM Subject: Which ATA device do you recommend? To: asterisk-users-request@lists.digium.com Hello, I'm developing a Voip Solution for a client, which ATA SIP do you recommend? there are some ATA devices fully tested with Asterisk? I hope that Asterisk experient users could give me

Hi Folks, Can anyone give me some good recommendations for VoIP providrs that support Asterisk PBX's? We're based in Georgia and I having a hard time finding anyone.... Regards, Jim PS - If you could CC me in on the reply I would greatly appreciate it! jim(-A T-)linux-sp.com

Hey, I got a weird one for you guys, I am running vanilla 1.2.4 and have all incoming calls come in as SIP from teliax. Twice over the past week 2 callers who have called in around the same time end up talking to each other instead of going through the ivr or at some point during the IVR. One said, yeah i was talking to another patient and we had a convo. I have double checked the dialplan and

Hi, I have Sangoma A101DE 1 Port E1/T1 With Hardware Echo Cancellation ( PCI Express ) Card installed on the box. *Its not detected.* Details are as below :- [root at asterisk ~]# lspci 00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01) 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:05.0 PCI bridge: ATI

Hi, I have Asterisk-1.2.18 install with FreePBX & more than 75 extnsion, daily I come accross an issue & try resolving them its either user learning curve or my ignorance. But, I dont know what to say regarding this issue. I have my Dial Plan for internal users to have a 3 Digit Extensions. So instance my Ext is 239 & someone dials the main #, its gets the

We will be connecting our Asterisk server to ISDN 30 and intend using the Sangoma A101 card. The install location is in London (UK). Sangoma card at Voipon http://www.voipon.co.uk/sangoma-a101-pri-isdn-card-p-132.html?gclid=CI32vJz22I0CFQXklAodIgjHaA I would be grateful to hear if this is the right choice of card. Usage reports would be helpful. Regards Rory -- Rory Campbell-Lange

Hi, I have a Dell Power Edge server & planning yo buy Sangoma A101D card. To configure with my Asterisk 1.2.18 & zaptel-1.2.17.1 & Free-PBX setup. So I wanted to know the steps & any issue which I may come accross if any. I have googled & have some docs handy wrt Trixbox-2.2. Just wanted to get some notes from user with custom install setup when used with

FYI, spoke with Grandstream this morning, the GXP-2000 release has been delayed again. Looking like April now before these hit the street. -- Cory Andrews Senior Partner VOIPSupply.com +++++++++++++ V: 800.398.VOIP X22 F: 716.630.1548 E: Cory@VOIPSupply.com