similar to: Recommend Digium Hardware?

I'm having trouble getting an Asterisk server to make outbound calls on my iDCS Trunks. I have idcs station to asterisk station working I have asterisk station to idcs station working However, I am unable to get Asterisk to utilize any outbound trunks on my iDCS.... Anybody have any ideas? ________________________________________________________________ Sent via the WebMail system at

Any Recommendations on a "Good" Wireless Voip Keyset that works well with Asterisk? I would prefer one that is IAX2 as it works better behind a Nat'd Firewall.. But I am reaching out to you guys as you all would know what would work the best :-) ________________________________________________________________ Sent via the WebMail system at kotbh.net

I am trying to determine what would need to be done/modified to enable the following: I have a SIP extension come into my asterisk box, and I then need it to call "6-10" remote Sip Stations that are set to Auto-Answer... (note, my remote sip stations are actually cisco h323 devices, I can call them fine from any softphone, or other device, and have full-duplex audio, however, i need to

What are people's thoughts on asterisk 1.2.26? Any show stopping bugs? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080117/57d1002d/attachment.htm

How well does the Grandstream GXW-4104 or (8) work w/Asterisk? I would use a Cisco Switch w/FXO Ports but that would be a little "Pricy" I Can't use a Digium FXO Card, as the asterisk Server is offsite. Thanks, William Stillwell KI4SWY ________________________________________________________________ Sent via the WebMail system at kotbh.net

Anybody know a reliable fax solution for 1.4.30 branch? I am using PikaFax on another server and works very well (about 3000 faxes a week), but it appears they no longer offer their product to open source asterisk, only for there "WARP" appliance. NOT really looking to migrate from 1.4.x to 1.6.x -------------- next part -------------- An HTML attachment was

Hello, I am using Queue application with multiple agents in each queue. I want to set the CDR(userfield) for each cdr based on the agent answering the call. Is it possible to do this? Thanks

Hi Guys, i am using two PBX's i can call from pbx1 a cellphone tied to pbx2 that way: 1) use a phone in PBX1 2) call extension in PBX2 3) extensions in PBX2 ring to a cellphone (as this specific ext is tied to a cellphone) my questions now is : am i gonna be able to dial from an IPphone registered within PBX1 to a cellphone by using the Trunk (Zap or dahdi) of PBX2? anybody know

I have several remote phones that experience a slight "call" delay when answering phones, ie, they will answer, speak a few words, and then the remote caller will hear them, and the first half is cutoff? Any idea what could be causing this? Thanks, Bill. -------------- next part -------------- An HTML attachment was scrubbed... URL:

>b) According to http://wiki.xiph.org/OggOpus#Comment_Header >there should be no REPLAYGAIN_*** tags in Opus files; Opus uses >R128_TRACK_GAIN tag. If some audio player reads Opus tags then it should >be aware of the difference between ReplayGain and R128. But this doesn't >require REPLAYGAIN_REFERENCE_LOUDNESS tag. > > The Opus replaygain spec is fundamentally broken, so

Well, this kinda sux. We have three Asterisk servers. Phones register to a single, primary server. When a phone on one wants to reach a phone on another, we use DUNDi to discover the destination pbx and IAX to transfer the call to the other Asterisk box. This seems to be a fairly common practice amongst Asterisk users, yes? Well, what about setting variables before call placement? Say you want

Anybody notice log delays in this list, and very small amount of traffic? -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110109/576a9b0e/attachment.htm>

I have asked a GSM operator in my country if he can route a number or a short code to my asterisk server via SIP (since they dont give DIDs in my country) the operator said they do not support SIP, they have no way of converting GSM calls to SIP to then send them to me. I would like to know what is needed from the operator side to do this, what kind of material is needed, or what can be done from

Hi, Having problems with getting either RxFax or FaxReceive to compile. Running Asterisk 1.4 on CentOS 5. Does anyone have the free/open source executables that you could send me? Thanks for your help! P. S.: TxFax and FaxSend would also be appreciated.

Does anybody know of a Similar list for SwitchVoX? And would like to post to proper list if one is available. I had posted on digium forum, but have not received any responses yet. http://forums.digium.com/viewtopic.php?f=38 <http://forums.digium.com/viewtopic.php?f=38&t=77031&sid=4adb81c464701e0039d e21a300aa273f> &t=77031&sid=4adb81c464701e0039de21a300aa273f

I am trying to configure a channel bank with 24 ports of FXS., but appear to be hitting a roadblock? This worked on v1.4.xx but now just get "SimpleSwitch" and immediate=no/yes don't seem to make a difference?, no matter if under top section, under channel, etc. Chan_dahdi.conf: [channels] context=default usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes

Dear forum, I would like to forecast e.g. with the arima-model. To figure out which model works best I am going to predict with this models. my first code: for(ar.ord in 1:3){ for(ma.ord in 1:3){ print(predict(arima(para_qtr[1:(n-8),1],order=c(ar.ord,1,ma.ord)), n.ahead=8)$pred) } } this one works. but I want to "save" my results in a matrix or a data.frame. my second code:

Hi, I know you can access various sip variables via 'Set(sstatus=${SIPPEER(201,status)})' (for example) to get the status of the sip user - but what about variables? I have a user that has setvar=123456 in their users.conf (sip.conf if you prefer). I can read it with a 'sip show peer 201' - but that gives everything and parsing that isn't really an option. Anyone know how

Hello, We succeed to send faxes using FFA, when the files are converted to tif from PDF using gs, but it doesn't work with tif files we copy/upload directly from our PCs. We saw in the manual that the size is important, since we got the error "FAX handle 0: failed to queue document 'filename.tif'", so we set it to 1680x2285, but it's still rejected. Is there a way

I have several sip stations that on a that are on a nat'd network behind a nice friend firewall.. no audio path issues, 2 way audio works, etc,etc,etc. However, I can't get any of my phones to Transfer or Blind Transfer.. I search and search, and well, just about gone nuts on this one. Here is sip debug from pressing "transfer->blind->dial dest->Dial Key" (note both